From: Corentin Labbe Date: Mon, 9 Jul 2018 19:51:54 +0000 (+0000) Subject: ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5f8208f557065163f9a8089ea2ea7888f9d96922;p=openwrt%2Fstaging%2Fblogic.git ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V Since commit d7c5f6863550 ("ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes") my BPIM3 no longer works at gigabit speed. With the default setting, dldo3 is regulated at 2.9v which seems sufficient for the PHY but the aforementioned commit drops it to 2.5V which is insufficient. Note that this behaviour is random for all BPIM3. Some work with 2.5V, but some don't. Finnaly, someone from Bananapi confirmed that this regulator must be set to 3.3V. Fixes: d7c5f6863550 ("ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes") Signed-off-by: Corentin Labbe [wens@csie.org: Reworked commit message] Signed-off-by: Chen-Yu Tsai --- diff --git a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts index 742d2946b08b..583a5a01642f 100644 --- a/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts +++ b/arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts @@ -314,8 +314,8 @@ ®_dldo3 { regulator-always-on; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-name = "vcc-pd"; };