From: blogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Mon, 2 May 2016 18:50:06 +0000 (+0000)
Subject: lantiq: VG3503J - use the same PHY led functionality as the OEM firmware
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5ed21401629c88c90326fa7e6148ff694937d067;p=openwrt%2Fstaging%2Fkaloz.git

lantiq: VG3503J - use the same PHY led functionality as the OEM firmware

Based on the vg3503j_gphy_led.sh script published in the VG3503J wiki
article, the OEM Firmware uses the following PHY led functionality:

    gphy led 0: LINK/ACTIVITY
    gphy led 1: LINK
    gphy led 2: ACTIVITY

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49278
---

diff --git a/target/linux/lantiq/dts/VG3503J.dtsi b/target/linux/lantiq/dts/VG3503J.dtsi
index 780d838206..62a336c497 100644
--- a/target/linux/lantiq/dts/VG3503J.dtsi
+++ b/target/linux/lantiq/dts/VG3503J.dtsi
@@ -153,18 +153,18 @@
 		phy11: ethernet-phy@11 {
 			reg = <0x11>;
 			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,led0h = <0x42>;
-			lantiq,led0l = <0x10>;
-			lantiq,led2h = <0x20>;
-			lantiq,led2l = <0x00>;
+			lantiq,led1h = <0x70>;
+			lantiq,led1l = <0x00>;
+			lantiq,led2h = <0x00>;
+			lantiq,led2l = <0x03>;
 		};
 		phy13: ethernet-phy@13 {
 			reg = <0x13>;
 			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,led0h = <0x42>;
-			lantiq,led0l = <0x10>;
-			lantiq,led2h = <0x20>;
-			lantiq,led2l = <0x00>;
+			lantiq,led1h = <0x70>;
+			lantiq,led1l = <0x00>;
+			lantiq,led2h = <0x00>;
+			lantiq,led2l = <0x03>;
 		};
 	};
 };