From: blogic Date: Mon, 2 May 2016 18:50:06 +0000 (+0000) Subject: lantiq: VG3503J - use the same PHY led functionality as the OEM firmware X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5ed21401629c88c90326fa7e6148ff694937d067;p=openwrt%2Fstaging%2Fblocktrron.git lantiq: VG3503J - use the same PHY led functionality as the OEM firmware Based on the vg3503j_gphy_led.sh script published in the VG3503J wiki article, the OEM Firmware uses the following PHY led functionality: gphy led 0: LINK/ACTIVITY gphy led 1: LINK gphy led 2: ACTIVITY Signed-off-by: Mathias Kresin SVN-Revision: 49278 --- diff --git a/target/linux/lantiq/dts/VG3503J.dtsi b/target/linux/lantiq/dts/VG3503J.dtsi index 780d838206..62a336c497 100644 --- a/target/linux/lantiq/dts/VG3503J.dtsi +++ b/target/linux/lantiq/dts/VG3503J.dtsi @@ -153,18 +153,18 @@ phy11: ethernet-phy@11 { reg = <0x11>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,led0h = <0x42>; - lantiq,led0l = <0x10>; - lantiq,led2h = <0x20>; - lantiq,led2l = <0x00>; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; }; phy13: ethernet-phy@13 { reg = <0x13>; compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,led0h = <0x42>; - lantiq,led0l = <0x10>; - lantiq,led2h = <0x20>; - lantiq,led2l = <0x00>; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; }; }; };