From: Florian Fainelli Date: Fri, 30 Oct 2009 09:55:53 +0000 (+0000) Subject: remove no longer used configs and patches X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5e7b871d8a6942c02afbb5db425f855dca4466fd;p=openwrt%2Fstaging%2Fdangole.git remove no longer used configs and patches SVN-Revision: 18221 --- diff --git a/target/linux/brcm63xx/config-2.6.27 b/target/linux/brcm63xx/config-2.6.27 deleted file mode 100644 index a9881d71a9..0000000000 --- a/target/linux/brcm63xx/config-2.6.27 +++ /dev/null @@ -1,205 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_AUDIT=y -CONFIG_AUDIT_GENERIC=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BCM63XX=y -CONFIG_BCM63XX_CPU_6338=y -CONFIG_BCM63XX_CPU_6345=y -CONFIG_BCM63XX_CPU_6348=y -CONFIG_BCM63XX_CPU_6358=y -CONFIG_BCM63XX_ENET=y -CONFIG_BCM63XX_PHY=y -CONFIG_BCM63XX_WDT=y -CONFIG_BITREVERSE=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_BOARD_BCM963XX=y -# CONFIG_BOARD_LIVEBOX is not set -# CONFIG_BSD_DISKLABEL is not set -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRAMFS=y -CONFIG_CSRC_R4K=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVICE=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_CLK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_IRQ_CPU=y -# CONFIG_ISDN is not set -CONFIG_KEXEC=y -CONFIG_LBD=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_FPU_EMU is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_BCM963XX=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -# CONFIG_NATSEMI is not set -# CONFIG_NO_IOPORT is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -CONFIG_POSIX_MQUEUE=y -# CONFIG_PROBE_INITRD_HEADER is not set -# CONFIG_R6040 is not set -CONFIG_RELAY=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SQUASHFS_VMALLOC=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SPROM=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -CONFIG_TICK_ONESHOT=y -CONFIG_TRAD_SIGNALS=y -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_SUPPORT=y -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm63xx/config-2.6.28 b/target/linux/brcm63xx/config-2.6.28 deleted file mode 100644 index ba4769713a..0000000000 --- a/target/linux/brcm63xx/config-2.6.28 +++ /dev/null @@ -1,203 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_AUDIT=y -CONFIG_AUDIT_GENERIC=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM47XX is not set -CONFIG_BCM63XX=y -CONFIG_BCM63XX_CPU_6338=y -CONFIG_BCM63XX_CPU_6345=y -CONFIG_BCM63XX_CPU_6348=y -CONFIG_BCM63XX_CPU_6358=y -CONFIG_BCM63XX_ENET=y -CONFIG_BCM63XX_PHY=y -CONFIG_BCM63XX_WDT=y -CONFIG_BITREVERSE=y -CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_BOARD_BCM963XX=y -# CONFIG_BOARD_LIVEBOX is not set -# CONFIG_BSD_DISKLABEL is not set -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CLASSIC_RCU=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R5500 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRAMFS=y -CONFIG_CSRC_R4K=y -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVICE=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_IRQ_CPU=y -# CONFIG_ISDN is not set -CONFIG_KEXEC=y -CONFIG_LBD=y -CONFIG_LEDS_GPIO=y -# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_EMMA is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MAGIC_SYSRQ=y -# CONFIG_MIKROTIK_RB532 is not set -CONFIG_MIPS=y -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_FPU_EMU is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MTD_BCM963XX=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_BE_BYTE_SWAP=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_NOSWAP is not set -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -# CONFIG_NATSEMI is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_NXP_STB220 is not set -# CONFIG_NXP_STB225 is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -CONFIG_POSIX_MQUEUE=y -# CONFIG_PROBE_INITRD_HEADER is not set -# CONFIG_R6040 is not set -CONFIG_RELAY=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SQUASHFS_VMALLOC=y -CONFIG_SSB=y -CONFIG_SSB_B43_PCI_BRIDGE=y -# CONFIG_SSB_DRIVER_MIPS is not set -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_SPROM=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TC35815 is not set -CONFIG_TICK_ONESHOT=y -CONFIG_TRAD_SIGNALS=y -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_SUPPORT=y -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm63xx/patches-2.6.27/001-add_broadcom_63xx_cpu_definitions.patch b/target/linux/brcm63xx/patches-2.6.27/001-add_broadcom_63xx_cpu_definitions.patch deleted file mode 100644 index 163f8bea52..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/001-add_broadcom_63xx_cpu_definitions.patch +++ /dev/null @@ -1,100 +0,0 @@ -From a9f65413f9ea81ef2208da66a3db9cb8a9020eef Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Fri, 18 Jul 2008 15:53:08 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add Broadcom 63xx CPU definitions. - -Signed-off-by: Maxime Bizon ---- - arch/mips/kernel/cpu-probe.c | 25 +++++++++++++++++++++++++ - arch/mips/mm/tlbex.c | 4 ++++ - include/asm-mips/cpu.h | 7 +++++++ - 3 files changed, 36 insertions(+), 0 deletions(-) - ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -153,6 +153,9 @@ void __init check_wait(void) - case CPU_25KF: - case CPU_PR4450: - case CPU_BCM3302: -+ case CPU_BCM6338: -+ case CPU_BCM6348: -+ case CPU_BCM6358: - cpu_wait = r4k_wait; - break; - -@@ -802,11 +805,28 @@ static inline void cpu_probe_broadcom(st - decode_configs(c); - switch (c->processor_id & 0xff00) { - case PRID_IMP_BCM3302: -+ /* same as PRID_IMP_BCM6338 */ - c->cputype = CPU_BCM3302; - break; - case PRID_IMP_BCM4710: - c->cputype = CPU_BCM4710; - break; -+ case PRID_IMP_BCM6345: -+ c->cputype = CPU_BCM6345; -+ break; -+ case PRID_IMP_BCM6348: -+ c->cputype = CPU_BCM6348; -+ break; -+ case PRID_IMP_BCM4350: -+ switch (c->processor_id & 0xf0) { -+ case PRID_REV_BCM6358: -+ c->cputype = CPU_BCM6358; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+ break; - default: - c->cputype = CPU_UNKNOWN; - break; -@@ -892,6 +912,10 @@ static __cpuinit const char *cpu_to_name - case CPU_SR71000: name = "Sandcraft SR71000"; break; - case CPU_BCM3302: name = "Broadcom BCM3302"; break; - case CPU_BCM4710: name = "Broadcom BCM4710"; break; -+ case CPU_BCM6338: name = "Broadcom BCM6338"; break; -+ case CPU_BCM6345: name = "Broadcom BCM6345"; break; -+ case CPU_BCM6348: name = "Broadcom BCM6348"; break; -+ case CPU_BCM6358: name = "Broadcom BCM6358"; break; - case CPU_PR4450: name = "Philips PR4450"; break; - case CPU_LOONGSON2: name = "ICT Loongson-2"; break; - default: ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -317,6 +317,10 @@ static void __cpuinit build_tlb_write_en - case CPU_BCM3302: - case CPU_BCM4710: - case CPU_LOONGSON2: -+ case CPU_BCM6338: -+ case CPU_BCM6345: -+ case CPU_BCM6348: -+ case CPU_BCM6358: - if (m4kc_tlbp_war()) - uasm_i_nop(p); - tlbw(p); ---- a/include/asm-mips/cpu.h -+++ b/include/asm-mips/cpu.h -@@ -112,6 +112,12 @@ - - #define PRID_IMP_BCM4710 0x4000 - #define PRID_IMP_BCM3302 0x9000 -+#define PRID_IMP_BCM6338 0x9000 -+#define PRID_IMP_BCM6345 0x8000 -+#define PRID_IMP_BCM6348 0x9100 -+#define PRID_IMP_BCM4350 0xA000 -+#define PRID_REV_BCM6358 0x0010 -+#define PRID_REV_BCM6368 0x0030 - - /* - * Definitions for 7:0 on legacy processors -@@ -198,6 +204,7 @@ enum cpu_type_enum { - CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, - CPU_AU1000, CPU_AU1100, CPU_AU1200, CPU_AU1210, CPU_AU1250, CPU_AU1500, - CPU_AU1550, CPU_PR4450, CPU_BCM3302, CPU_BCM4710, -+ CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358, - - /* - * MIPS64 class processors diff --git a/target/linux/brcm63xx/patches-2.6.27/002-add_support_for_broadcom_63xx_cpus.patch b/target/linux/brcm63xx/patches-2.6.27/002-add_support_for_broadcom_63xx_cpus.patch deleted file mode 100644 index af494f4959..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/002-add_support_for_broadcom_63xx_cpus.patch +++ /dev/null @@ -1,122 +0,0 @@ -From 0713aadd2a4e543b69022aa40bdec3e1dc5bc1e5 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Mon, 18 Aug 2008 13:56:57 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add support for Broadcom 63xx CPUs. - -Signed-off-by: Maxime Bizon ---- - arch/mips/Kconfig | 16 + - arch/mips/Makefile | 7 + - arch/mips/bcm63xx/Kconfig | 9 + - arch/mips/bcm63xx/Makefile | 2 + - arch/mips/bcm63xx/clk.c | 220 ++++++ - arch/mips/bcm63xx/cpu.c | 245 +++++++ - arch/mips/bcm63xx/cs.c | 144 ++++ - arch/mips/bcm63xx/early_printk.c | 30 + - arch/mips/bcm63xx/gpio.c | 98 +++ - arch/mips/bcm63xx/irq.c | 253 +++++++ - arch/mips/bcm63xx/prom.c | 43 ++ - arch/mips/bcm63xx/setup.c | 108 +++ - arch/mips/bcm63xx/timer.c | 205 ++++++ - include/asm-mips/fixmap.h | 4 + - include/asm-mips/mach-bcm63xx/bcm63xx_clk.h | 11 + - include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h | 314 +++++++++ - include/asm-mips/mach-bcm63xx/bcm63xx_cs.h | 10 + - include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h | 14 + - include/asm-mips/mach-bcm63xx/bcm63xx_io.h | 93 +++ - include/asm-mips/mach-bcm63xx/bcm63xx_irq.h | 15 + - include/asm-mips/mach-bcm63xx/bcm63xx_regs.h | 728 ++++++++++++++++++++ - include/asm-mips/mach-bcm63xx/bcm63xx_timer.h | 11 + - .../asm-mips/mach-bcm63xx/cpu-feature-overrides.h | 51 ++ - include/asm-mips/mach-bcm63xx/gpio.h | 52 ++ - include/asm-mips/mach-bcm63xx/war.h | 25 + - 25 files changed, 2708 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/Kconfig - create mode 100644 arch/mips/bcm63xx/Makefile - create mode 100644 arch/mips/bcm63xx/clk.c - create mode 100644 arch/mips/bcm63xx/cpu.c - create mode 100644 arch/mips/bcm63xx/cs.c - create mode 100644 arch/mips/bcm63xx/early_printk.c - create mode 100644 arch/mips/bcm63xx/gpio.c - create mode 100644 arch/mips/bcm63xx/irq.c - create mode 100644 arch/mips/bcm63xx/prom.c - create mode 100644 arch/mips/bcm63xx/setup.c - create mode 100644 arch/mips/bcm63xx/timer.c - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_clk.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_cs.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_io.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_irq.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_regs.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_timer.h - create mode 100644 include/asm-mips/mach-bcm63xx/cpu-feature-overrides.h - create mode 100644 include/asm-mips/mach-bcm63xx/gpio.h - create mode 100644 include/asm-mips/mach-bcm63xx/war.h - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -59,6 +59,21 @@ config BCM47XX - help - Support for BCM47XX based boards - -+config BCM63XX -+ bool "Broadcom 63xx based boards" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_EARLY_PRINTK -+ select SWAP_IO_SPACE -+ select ARCH_REQUIRE_GPIOLIB -+ help -+ Support for BCM63XX based boards -+ - config MIPS_COBALT - bool "Cobalt Server" - select CEVT_R4K -@@ -600,6 +615,7 @@ endchoice - - source "arch/mips/au1000/Kconfig" - source "arch/mips/basler/excite/Kconfig" -+source "arch/mips/bcm63xx/Kconfig" - source "arch/mips/jazz/Kconfig" - source "arch/mips/lasat/Kconfig" - source "arch/mips/pmc-sierra/Kconfig" ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -540,6 +540,13 @@ cflags-$(CONFIG_BCM47XX) += -Iinclude/as - load-$(CONFIG_BCM47XX) := 0xffffffff80001000 - - # -+# Broadcom BCM63XX boards -+# -+core-$(CONFIG_BCM63XX) += arch/mips/bcm63xx/ -+cflags-$(CONFIG_BCM63XX) += -Iinclude/asm-mips/mach-bcm63xx/ -+load-$(CONFIG_BCM63XX) := 0xffffffff80010000 -+ -+# - # SNI RM - # - core-$(CONFIG_SNI_RM) += arch/mips/sni/ ---- a/include/asm-mips/fixmap.h -+++ b/include/asm-mips/fixmap.h -@@ -67,11 +67,15 @@ enum fixed_addresses { - * the start of the fixmap, and leave one page empty - * at the top of mem.. - */ -+#ifdef CONFIG_BCM63XX -+#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000) -+#else - #if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX) - #define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000)) - #else - #define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000) - #endif -+#endif - #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) - #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) - diff --git a/target/linux/brcm63xx/patches-2.6.27/003-add_serial_driver_for_bcm63xx_integr.patch b/target/linux/brcm63xx/patches-2.6.27/003-add_serial_driver_for_bcm63xx_integr.patch deleted file mode 100644 index c998b00bfd..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/003-add_serial_driver_for_bcm63xx_integr.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 6c489656b09998ed6a6f857e01ccf630e29358dd Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Fri, 18 Jul 2008 19:35:55 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add serial driver for bcm63xx integrated UART. - -Signed-off-by: Maxime Bizon ---- - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-uart.c | 41 + - drivers/serial/Kconfig | 19 + - drivers/serial/Makefile | 1 + - drivers/serial/bcm63xx_uart.c | 890 ++++++++++++++++++++++ - include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h | 6 + - include/linux/serial_core.h | 2 + - 7 files changed, 960 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-uart.c - create mode 100644 drivers/serial/bcm63xx_uart.c - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h - ---- a/drivers/serial/Kconfig -+++ b/drivers/serial/Kconfig -@@ -1421,4 +1421,23 @@ config SPORT_BAUD_RATE - default 19200 if (SERIAL_SPORT_BAUD_RATE_19200) - default 9600 if (SERIAL_SPORT_BAUD_RATE_9600) - -+config SERIAL_BCM63XX -+ tristate "bcm63xx serial port support" -+ select SERIAL_CORE -+ depends on BCM63XX -+ help -+ If you have a bcm63xx CPU, you can enable its onboard -+ serial port by enabling this options. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called bcm963xx_uart. -+ -+config SERIAL_BCM63XX_CONSOLE -+ bool "Console on bcm63xx serial port" -+ depends on SERIAL_BCM63XX -+ select SERIAL_CORE_CONSOLE -+ help -+ If you have enabled the serial port on the bcm63xx CPU -+ you can make it the console by answering Y to this option. -+ - endmenu ---- a/drivers/serial/Makefile -+++ b/drivers/serial/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711 - obj-$(CONFIG_SERIAL_PXA) += pxa.o - obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o - obj-$(CONFIG_SERIAL_SA1100) += sa1100.o -+obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o - obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o - obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o - obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o ---- a/include/linux/serial_core.h -+++ b/include/linux/serial_core.h -@@ -155,6 +155,8 @@ - - #define PORT_SC26XX 82 - -+#define PORT_BCM63XX 83 -+ - #ifdef __KERNEL__ - - #include diff --git a/target/linux/brcm63xx/patches-2.6.27/004_add_pci_support.patch b/target/linux/brcm63xx/patches-2.6.27/004_add_pci_support.patch deleted file mode 100644 index 47390f30a1..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/004_add_pci_support.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 2a7fa2dbbf68650644f807a50cc2d84ca30835c1 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Sun, 21 Sep 2008 04:47:13 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add PCI support. - -Signed-off-by: Maxime Bizon ---- - arch/mips/bcm63xx/Kconfig | 2 + - arch/mips/bcm63xx/setup.c | 2 + - arch/mips/pci/Makefile | 2 + - arch/mips/pci/fixup-bcm63xx.c | 21 +++ - arch/mips/pci/ops-bcm63xx.c | 179 +++++++++++++++++++++++ - arch/mips/pci/pci-bcm63xx.c | 178 ++++++++++++++++++++++ - arch/mips/pci/pci-bcm63xx.h | 27 ++++ - include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h | 6 + - 8 files changed, 417 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/pci/fixup-bcm63xx.c - create mode 100644 arch/mips/pci/ops-bcm63xx.c - create mode 100644 arch/mips/pci/pci-bcm63xx.c - create mode 100644 arch/mips/pci/pci-bcm63xx.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h - ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o - obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o - obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o - obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o -+obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ -+ ops-bcm63xx.o - - # - # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/brcm63xx/patches-2.6.27/006-pcmcia_cardbus_support.patch b/target/linux/brcm63xx/patches-2.6.27/006-pcmcia_cardbus_support.patch deleted file mode 100644 index 5812912c00..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/006-pcmcia_cardbus_support.patch +++ /dev/null @@ -1,43 +0,0 @@ -From b17597be763621ba63534fda6e1ea0a802be2087 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Fri, 18 Jul 2008 21:18:51 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add PCMCIA & Cardbus support. - -Signed-off-by: Maxime Bizon ---- - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-pcmcia.c | 135 +++++ - drivers/pcmcia/Kconfig | 4 + - drivers/pcmcia/Makefile | 1 + - drivers/pcmcia/bcm63xx_pcmcia.c | 521 ++++++++++++++++++++ - drivers/pcmcia/bcm63xx_pcmcia.h | 65 +++ - include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h | 13 + - 7 files changed, 740 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-pcmcia.c - create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.c - create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h - ---- a/drivers/pcmcia/Kconfig -+++ b/drivers/pcmcia/Kconfig -@@ -196,6 +196,10 @@ config PCMCIA_AU1X00 - tristate "Au1x00 pcmcia support" - depends on SOC_AU1X00 && PCMCIA - -+config PCMCIA_BCM63XX -+ tristate "bcm63xx pcmcia support" -+ depends on BCM63XX && PCMCIA -+ - config PCMCIA_SA1100 - tristate "SA1100 support" - depends on ARM && ARCH_SA1100 && PCMCIA ---- a/drivers/pcmcia/Makefile -+++ b/drivers/pcmcia/Makefile -@@ -33,6 +33,7 @@ obj-$(CONFIG_PCMCIA_PXA2XX) - obj-$(CONFIG_M32R_PCC) += m32r_pcc.o - obj-$(CONFIG_M32R_CFC) += m32r_cfc.o - obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o -+obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o - obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o - obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o - obj-$(CONFIG_OMAP_CF) += omap_cf.o diff --git a/target/linux/brcm63xx/patches-2.6.27/007-usb_ohci_support.patch b/target/linux/brcm63xx/patches-2.6.27/007-usb_ohci_support.patch deleted file mode 100644 index e41d1c5f32..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/007-usb_ohci_support.patch +++ /dev/null @@ -1,56 +0,0 @@ -From f7416412febd7efc1d33c7506c81265719368667 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Mon, 21 Jul 2008 14:58:19 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add USB OHCI support. - -Signed-off-by: Maxime Bizon ---- - arch/mips/bcm63xx/Kconfig | 6 + - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-usb-ohci.c | 50 ++++++ - drivers/usb/host/ohci-bcm63xx.c | 159 ++++++++++++++++++++ - drivers/usb/host/ohci-hcd.c | 5 + - drivers/usb/host/ohci.h | 7 +- - .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 + - 7 files changed, 233 insertions(+), 1 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c - create mode 100644 drivers/usb/host/ohci-bcm63xx.c - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h - ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -1050,6 +1050,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER usb_hcd_pnx4008_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ohci-bcm63xx.c" -+#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver -+#endif -+ - #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) ---- a/drivers/usb/host/ohci.h -+++ b/drivers/usb/host/ohci.h -@@ -549,6 +549,11 @@ static inline struct usb_hcd *ohci_to_hc - #define writel_be(val, addr) out_be32((__force unsigned *)addr, val) - #endif - -+#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX) -+#define readl_be(addr) __raw_readl((__force unsigned *)addr) -+#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) -+#endif -+ - static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci, - __hc32 __iomem * regs) - { -@@ -654,7 +659,7 @@ static inline u32 hc32_to_cpup (const st - * some big-endian SOC implementations. Same thing happens with PSW access. - */ - --#ifdef CONFIG_PPC_MPC52xx -+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX) - #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO) - #else - #define big_endian_frame_no_quirk(ohci) 0 diff --git a/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch b/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch deleted file mode 100644 index b656a2cb92..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/008-usb_ehci_support.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 2940d1996c86c4c4dd7a82214f846d0c0b707165 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Mon, 21 Jul 2008 18:24:42 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add USB EHCI support. - -Signed-off-by: Maxime Bizon ---- - arch/mips/bcm63xx/Kconfig | 2 + - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-usb-ehci.c | 50 +++++++ - drivers/usb/host/ehci-bcm63xx.c | 152 ++++++++++++++++++++ - drivers/usb/host/ehci-hcd.c | 5 + - drivers/usb/host/ehci.h | 5 + - .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 + - 7 files changed, 221 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c - create mode 100644 drivers/usb/host/ehci-bcm63xx.c - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h - ---- a/drivers/usb/host/ehci-hcd.c -+++ b/drivers/usb/host/ehci-hcd.c -@@ -1041,6 +1041,11 @@ MODULE_LICENSE ("GPL"); - #define PLATFORM_DRIVER ixp4xx_ehci_driver - #endif - -+#ifdef CONFIG_BCM63XX -+#include "ehci-bcm63xx.c" -+#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver -+#endif -+ - #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ - !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) - #error "missing bus glue for ehci-hcd" ---- a/drivers/usb/host/ehci.h -+++ b/drivers/usb/host/ehci.h -@@ -764,6 +764,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u - #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) - #endif - -+#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX) -+#define readl_be(addr) __raw_readl((__force unsigned *)addr) -+#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr) -+#endif -+ - static inline unsigned int ehci_readl(const struct ehci_hcd *ehci, - __u32 __iomem * regs) - { ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -44,7 +44,7 @@ config USB_EHCI_HCD - - config USB_EHCI_ROOT_HUB_TT - bool "Root Hub Transaction Translators" -- depends on USB_EHCI_HCD -+ depends on USB_EHCI_HCD && !BCM63XX - ---help--- - Some EHCI chips have vendor-specific extensions to integrate - transaction translators, so that no OHCI or UHCI companion diff --git a/target/linux/brcm63xx/patches-2.6.27/009-add_integrated_ethernet_mac_support.patch b/target/linux/brcm63xx/patches-2.6.27/009-add_integrated_ethernet_mac_support.patch deleted file mode 100644 index fcb045bcb0..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/009-add_integrated_ethernet_mac_support.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 49aa7ffcd9bd2d9a0af99fced7b8511160dbf345 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Sun, 21 Sep 2008 03:43:26 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet mac support. - -Signed-off-by: Maxime Bizon ---- - arch/mips/bcm63xx/Makefile | 1 + - arch/mips/bcm63xx/dev-enet.c | 158 ++ - drivers/net/Kconfig | 9 + - drivers/net/Makefile | 1 + - drivers/net/bcm63xx_enet.c | 1894 ++++++++++++++++++++++ - drivers/net/bcm63xx_enet.h | 294 ++++ - include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h | 45 + - 7 files changed, 2402 insertions(+), 0 deletions(-) - create mode 100644 arch/mips/bcm63xx/dev-enet.c - create mode 100644 drivers/net/bcm63xx_enet.c - create mode 100644 drivers/net/bcm63xx_enet.h - create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h - ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -1963,6 +1963,15 @@ config NE_H8300 - Say Y here if you want to use the NE2000 compatible - controller on the Renesas H8/300 processor. - -+config BCM63XX_ENET -+ tristate "Broadcom 63xx internal mac support" -+ depends on BCM63XX -+ select MII -+ select PHYLIB -+ help -+ This driver supports the ethernet MACs in the Broadcom 63xx -+ MIPS chipset family (BCM63XX). -+ - source "drivers/net/fs_enet/Kconfig" - - endif # NET_ETHERNET ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -123,6 +123,7 @@ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o - obj-$(CONFIG_B44) += b44.o - obj-$(CONFIG_FORCEDETH) += forcedeth.o - obj-$(CONFIG_NE_H8300) += ne-h8300.o -+obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o - obj-$(CONFIG_AX88796) += ax88796.o - - obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o diff --git a/target/linux/brcm63xx/patches-2.6.27/010-add_integrated_ethernet_phy_support.patch b/target/linux/brcm63xx/patches-2.6.27/010-add_integrated_ethernet_phy_support.patch deleted file mode 100644 index b2eace1c52..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/010-add_integrated_ethernet_phy_support.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 7eefcb968019804e024c8243e28afb1eebd674a2 Mon Sep 17 00:00:00 2001 -From: Maxime Bizon -Date: Sun, 21 Sep 2008 02:20:53 +0200 -Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet PHY support for phylib. - -Signed-off-by: Maxime Bizon ---- - drivers/net/phy/Kconfig | 6 ++ - drivers/net/phy/Makefile | 1 + - drivers/net/phy/bcm63xx.c | 132 +++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 139 insertions(+), 0 deletions(-) - create mode 100644 drivers/net/phy/bcm63xx.c - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -62,6 +62,12 @@ config BROADCOM_PHY - Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481 - and BCM5482 PHYs. - -+config BCM63XX_PHY -+ tristate "Drivers for Broadcom 63xx SOCs internal PHY" -+ depends on BCM63XX -+ ---help--- -+ Currently supports the 6348 and 6358 PHYs. -+ - config ICPLUS_PHY - tristate "Drivers for ICPlus PHYs" - ---help--- ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o - obj-$(CONFIG_SMSC_PHY) += smsc.o - obj-$(CONFIG_VITESSE_PHY) += vitesse.o - obj-$(CONFIG_BROADCOM_PHY) += broadcom.o -+obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o - obj-$(CONFIG_ICPLUS_PHY) += icplus.o - obj-$(CONFIG_ADM6996_PHY) += adm6996.o - obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o diff --git a/target/linux/brcm63xx/patches-2.6.27/020-watchdog.patch b/target/linux/brcm63xx/patches-2.6.27/020-watchdog.patch deleted file mode 100644 index 0df5882635..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/020-watchdog.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -102,6 +102,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o - - # PARISC Architecture - ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -704,6 +704,16 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config BCM63XX_WDT -+ tristate "Broadcom BCM63xx hardware watchdog" -+ depends on BCM63XX -+ help -+ Watchdog driver for the built in watchdog hardware in Broadcom -+ BCM63xx SoC. -+ -+ To compile thi driver as a loadable module, choose M here. -+ The module will be called bcm63xx_wdt. -+ - # PARISC Architecture - - # POWERPC Architecture diff --git a/target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch deleted file mode 100644 index 7c7fd94587..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/040-bcm963xx_flashmap.patch +++ /dev/null @@ -1,73 +0,0 @@ -From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001 -From: Axel Gembe -Date: Mon, 12 May 2008 18:54:09 +0200 -Subject: [PATCH] bcm963xx: flashmap support - - -Signed-off-by: Axel Gembe ---- - drivers/mtd/maps/Kconfig | 7 +++++++ - drivers/mtd/maps/Makefile | 1 + - drivers/mtd/redboot.c | 13 ++++++++++--- - 3 files changed, 18 insertions(+), 3 deletions(-) - ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -257,6 +257,13 @@ config MTD_ALCHEMY - help - Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards - -+config MTD_BCM963XX -+ tristate "BCM963xx Flash device" -+ depends on MIPS && BCM63XX -+ help -+ Flash memory access on BCM963xx boards. Currently only works with -+ RedBoot and CFE. -+ - config MTD_DILNETPC - tristate "CFI Flash device mapped on DIL/Net PC" - depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -39,7 +39,7 @@ static inline int redboot_checksum(struc - return 1; - } - --static int parse_redboot_partitions(struct mtd_info *master, -+int parse_redboot_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long fis_origin) - { -@@ -162,6 +162,14 @@ static int parse_redboot_partitions(stru - goto out; - } - -+ if (!fis_origin) { -+ for (i = 0; i < numslots; i++) { -+ if (!strncmp(buf[i].name, "RedBoot", 8)) { -+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1); -+ } -+ } -+ } -+ - for (i = 0; i < numslots; i++) { - struct fis_list *new_fl, **prev; - -@@ -184,9 +192,8 @@ static int parse_redboot_partitions(stru - new_fl->img = &buf[i]; - if (fis_origin) { - buf[i].flash_base -= fis_origin; -- } else { -- buf[i].flash_base &= master->size-1; - } -+ buf[i].flash_base &= (master->size << 1) - 1; - - /* I'm sure the JFFS2 code has done me permanent damage. - * I now think the following is _normal_ ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -65,3 +65,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o - obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o - obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o - obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o -+obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o diff --git a/target/linux/brcm63xx/patches-2.6.27/050-spi.patch b/target/linux/brcm63xx/patches-2.6.27/050-spi.patch deleted file mode 100644 index fe3c430f13..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/050-spi.patch +++ /dev/null @@ -1,26 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -217,6 +217,13 @@ config SPI_XILINX - See the "OPB Serial Peripheral Interface (SPI) (v1.00e)" - Product Specification document (DS464) for hardware details. - -+config SPI_BCM63XX -+ tristate "Broadcom BCM63xx SPI controller" -+ depends on BCM63XX -+ select SPI_BITBANG -+ help -+ SPI driver for the Broadcom BCM63xx SPI controller. -+ - # - # Add new SPI master controllers in alphabetical order above this line - # ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x - obj-$(CONFIG_SPI_TXX9) += spi_txx9.o - obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o - obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o -+obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o - # ... add above this line ... - - # SPI protocol drivers (device/link on bus) diff --git a/target/linux/brcm63xx/patches-2.6.27/500-lzma_initramfs.patch b/target/linux/brcm63xx/patches-2.6.27/500-lzma_initramfs.patch deleted file mode 100644 index ad30e9436a..0000000000 --- a/target/linux/brcm63xx/patches-2.6.27/500-lzma_initramfs.patch +++ /dev/null @@ -1,125 +0,0 @@ ---- a/init/initramfs.c -+++ b/init/initramfs.c -@@ -6,6 +6,7 @@ - #include - #include - #include -+#include - - static __initdata char *message; - static void __init error(char *x) -@@ -423,6 +424,69 @@ static void __init flush_window(void) - outcnt = 0; - } - -+#include -+static int __init lzma_unzip(void) -+{ -+ unsigned int i; /* temp value */ -+ unsigned int lc; /* literal context bits */ -+ unsigned int lp; /* literal pos state bits */ -+ unsigned int pb; /* pos state bits */ -+ unsigned int osize; /* uncompressed size */ -+ unsigned char *workspace; -+ unsigned char* outputbuffer; -+ unsigned int outsizeProcessed = 0; -+ int workspace_size; -+ int res; -+ -+ // lzma args -+ i = get_byte(); -+ lc = i % 9, i = i / 9; -+ lp = i % 5, pb = i / 5; -+ -+ // skip dictionary size -+ for (i = 0; i < 4; i++) -+ get_byte(); -+ -+ /* read the lower half of uncompressed size in the header */ -+ osize = ((unsigned int)get_byte()) + -+ ((unsigned int)get_byte() << 8) + -+ ((unsigned int)get_byte() << 16) + -+ ((unsigned int)get_byte() << 24); -+ -+ /* skip rest of the header (upper half of uncompressed size) */ -+ for (i = 0; i < 4; i++) -+ get_byte(); -+ -+ workspace_size = ((LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb)) + 100; -+ printk( KERN_NOTICE "initramfs: LZMA lc=%d,lp=%d,pb=%d,origSize=%d\n", -+ lc,lp,pb,osize); -+ outputbuffer = vmalloc(osize); -+ if (outputbuffer == 0) { -+ printk(KERN_ERR "initramfs: Couldn't allocate lzma output buffer\n"); -+ return -1; -+ } -+ -+ workspace = vmalloc(workspace_size); -+ if (workspace == NULL) { -+ printk(KERN_ERR "initramfs: Couldn't allocate lzma workspace\n"); -+ return -1; -+ } -+ -+ res = LzmaDecode(workspace, workspace_size, lc, lp, pb, inbuf + inptr, insize - inptr, outputbuffer, osize, &outsizeProcessed); -+ if( res != 0 ) { -+ panic( KERN_ERR "initramfs: Lzma decode failure\n"); -+ return -1; -+ } -+ -+ flush_buffer(outputbuffer, outsizeProcessed); -+ inptr = insize; -+ -+ vfree(outputbuffer); -+ vfree(workspace); -+ state = Reset; -+ return 0; -+} -+ - static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) - { - int written; -@@ -457,12 +521,28 @@ static char * __init unpack_to_rootfs(ch - inptr = 0; - outcnt = 0; /* bytes in output buffer */ - bytes_out = 0; -- crc = (ulg)0xffffffffL; /* shift register contents */ -- makecrc(); -- gunzip(); -- if (state != Reset) -+ if( inbuf[0] == 037 && ((inbuf[1] == 0213) || (inbuf[1] == 0236))) -+ { -+ printk( KERN_NOTICE "detected gzip initramfs\n"); -+ crc = (ulg)0xffffffffL; /* shift register contents */ -+ makecrc(); -+ gunzip(); -+ if (state != Reset) - error("junk in gzipped archive"); -- this_header = saved_offset + inptr; -+ } -+ else if(!memcmp(inbuf+1, "\x00\x00\x80\x00", 4)) /* FIXME: hardcoded dictionary size */ -+ { -+ printk( KERN_NOTICE "detected lzma initramfs\n"); -+ lzma_unzip(); -+ } -+ else -+ { -+ // skip forward ? -+ crc = (ulg)0xffffffffL; /* shift register contents */ -+ makecrc(); -+ gunzip(); -+ } -+ this_header = saved_offset + inptr; - buf += inptr; - len -= inptr; - } ---- a/scripts/gen_initramfs_list.sh -+++ b/scripts/gen_initramfs_list.sh -@@ -287,7 +287,7 @@ if [ ! -z ${output_file} ]; then - if [ "${is_cpio_compressed}" = "compressed" ]; then - cat ${cpio_tfile} > ${output_file} - else -- cat ${cpio_tfile} | gzip -f -9 - > ${output_file} -+ lzma e -lc1 -lp2 -pb2 ${cpio_tfile} ${output_file} - fi - [ -z ${cpio_file} ] && rm ${cpio_tfile} - fi diff --git a/target/linux/olpc/config-2.6.27 b/target/linux/olpc/config-2.6.27 deleted file mode 100644 index c3ad33aef5..0000000000 --- a/target/linux/olpc/config-2.6.27 +++ /dev/null @@ -1,587 +0,0 @@ -CONFIG_4KSTACKS=y -# CONFIG_64BIT is not set -CONFIG_ACPI=y -CONFIG_ACPI_AC=y -# CONFIG_ACPI_ASUS is not set -CONFIG_ACPI_BATTERY=y -CONFIG_ACPI_BLACKLIST_YEAR=0 -CONFIG_ACPI_BUTTON=y -# CONFIG_ACPI_CONTAINER is not set -# CONFIG_ACPI_CUSTOM_DSDT is not set -# CONFIG_ACPI_DEBUG is not set -# CONFIG_ACPI_DOCK is not set -CONFIG_ACPI_EC=y -CONFIG_ACPI_FAN=y -# CONFIG_ACPI_PCI_SLOT is not set -CONFIG_ACPI_POWER=y -CONFIG_ACPI_PROCESSOR=y -# CONFIG_ACPI_PROCFS is not set -CONFIG_ACPI_PROCFS_POWER=y -CONFIG_ACPI_PROC_EVENT=y -# CONFIG_ACPI_SBS is not set -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_SYSFS_POWER=y -CONFIG_ACPI_SYSTEM=y -CONFIG_ACPI_THERMAL=y -# CONFIG_ACPI_TOSHIBA is not set -# CONFIG_ACPI_WMI is not set -# CONFIG_AGP is not set -# CONFIG_AIRO is not set -# CONFIG_APM is not set -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y -CONFIG_ARCH_HAS_CPU_RELAX=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ARCH_SUPPORTS_MSI=y -CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_ATM is not set -# CONFIG_ATMEL is not set -# CONFIG_AUDIT_ARCH is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_BACKLIGHT_MBP_NVIDIA is not set -# CONFIG_BACKLIGHT_PROGEAR is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -CONFIG_BASE_SMALL=0 -CONFIG_BATTERY_OLPC=y -# CONFIG_BINFMT_AOUT is not set -CONFIG_BINFMT_MISC=y -CONFIG_BITREVERSE=y -# CONFIG_BLK_DEV is not set -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -# CONFIG_BONDING is not set -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 -# CONFIG_BOOT_PRINTK_DELAY is not set -CONFIG_BOUNCE=y -CONFIG_CAN_PM_TRACE=y -CONFIG_CHR_DEV_SG=y -CONFIG_CLASSIC_RCU=y -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_COMPAT_VDSO=y -CONFIG_CONSOLE_TRANSLATIONS=y -# CONFIG_CPA_DEBUG is not set -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEBUG is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_IDLE is not set -# CONFIG_CRC_ITU_T is not set -# CONFIG_CS5535_GPIO is not set -# CONFIG_DCDBAS is not set -# CONFIG_DEBUG_BOOT_PARAMS is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_DEVRES is not set -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_INFO is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_NX_TEST is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUG_RODATA is not set -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_SHIRQ is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_STACKOVERFLOW is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_DELL_RBU is not set -CONFIG_DETECT_SOFTLOCKUP=y -CONFIG_DEVPORT=y -CONFIG_DISPLAY_SUPPORT=y -CONFIG_DMI=y -CONFIG_DMIID=y -CONFIG_DOUBLEFAULT=y -CONFIG_DUMMY_CONSOLE=y -CONFIG_EARLY_PRINTK=y -# CONFIG_EDAC is not set -# CONFIG_EDD is not set -# CONFIG_EFI is not set -CONFIG_ELF_CORE=y -CONFIG_EXT2_FS=y -# CONFIG_EXT3_FS is not set -CONFIG_FAST_CMPXCHG_LOCAL=y -# CONFIG_FAULT_INJECTION is not set -CONFIG_FB=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_GEODE=y -# CONFIG_FB_GEODE_GX is not set -# CONFIG_FB_GEODE_GX1 is not set -CONFIG_FB_GEODE_LX=y -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FIRMWARE_MEMMAP is not set -CONFIG_FIX_EARLYCON_MEM=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x16=y -CONFIG_FONT_8x8=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -# CONFIG_FRAME_POINTER is not set -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -# CONFIG_GENERIC_CPU is not set -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_GENERIC_GPIO is not set -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_ISA_DMA=y -# CONFIG_GENERIC_LOCKBREAK is not set -# CONFIG_GENERIC_TIME_VSYSCALL is not set -CONFIG_GEODE_MFGPT_TIMER=y -# CONFIG_HAMRADIO is not set -# CONFIG_HANGCHECK_TIMER is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_CLK is not set -# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_KVM=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y -# CONFIG_HERMES is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_HFS_FS is not set -CONFIG_HIBERNATION=y -CONFIG_HID=y -CONFIG_HID_SUPPORT=y -# CONFIG_HIGHMEM4G is not set -# CONFIG_HIGHMEM64G is not set -# CONFIG_HPET is not set -CONFIG_HPET_EMULATE_RTC=y -CONFIG_HPET_TIMER=y -CONFIG_HT_IRQ=y -# CONFIG_HUGETLBFS is not set -CONFIG_HW_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HW_RANDOM_AMD is not set -CONFIG_HW_RANDOM_GEODE=y -# CONFIG_HW_RANDOM_INTEL is not set -CONFIG_HW_RANDOM_VIA=y -# CONFIG_I2C is not set -CONFIG_I2C_BOARDINFO=y -# CONFIG_I8K is not set -# CONFIG_IDE is not set -# CONFIG_IEEE80211 is not set -# CONFIG_IFB is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_KEYBOARD=y -CONFIG_INPUT_MOUSE=y -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1200 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900 -# CONFIG_IOMMU_HELPER is not set -CONFIG_IO_DELAY_0X80=y -# CONFIG_IO_DELAY_0XED is not set -# CONFIG_IO_DELAY_NONE is not set -CONFIG_IO_DELAY_TYPE_0X80=0 -CONFIG_IO_DELAY_TYPE_0XED=1 -CONFIG_IO_DELAY_TYPE_NONE=3 -CONFIG_IO_DELAY_TYPE_UDELAY=2 -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IPV6 is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -# CONFIG_IP_NF_MATCH_AH is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_TARGET_REDIRECT is not set -# CONFIG_ISA is not set -CONFIG_ISA_DMA_API=y -# CONFIG_ISCSI_IBFT_FIND is not set -# CONFIG_ISDN is not set -# CONFIG_ISO9660_FS is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -CONFIG_KEXEC=y -# CONFIG_KEXEC_JUMP is not set -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KGDB is not set -CONFIG_KTIME_SCALAR=y -CONFIG_LCD_CLASS_DEVICE=y -# CONFIG_LCD_ILI9320 is not set -# CONFIG_LCD_LTV350QV is not set -# CONFIG_LCD_PLATFORM is not set -# CONFIG_LCD_VGG2432A4 is not set -# CONFIG_LEDS_CLEVO_MAIL is not set -# CONFIG_LIBERTAS is not set -CONFIG_LIBERTAS_DEBUG=y -# CONFIG_LIBERTAS_SDIO is not set -# CONFIG_LIBERTAS_USB is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_LOGO is not set -# CONFIG_M386 is not set -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586MMX is not set -# CONFIG_M586TSC is not set -# CONFIG_M686 is not set -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_MARKERS=y -# CONFIG_MATH_EMULATION is not set -# CONFIG_MCA is not set -# CONFIG_MCORE2 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MEDIA_TUNER is not set -# CONFIG_MEDIA_TUNER_MT20XX is not set -# CONFIG_MEDIA_TUNER_SIMPLE is not set -# CONFIG_MEDIA_TUNER_TDA8290 is not set -# CONFIG_MEDIA_TUNER_TDA9887 is not set -# CONFIG_MEDIA_TUNER_TEA5761 is not set -# CONFIG_MEDIA_TUNER_TEA5767 is not set -# CONFIG_MEDIA_TUNER_XC2028 is not set -# CONFIG_MEDIA_TUNER_XC5000 is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MEMTEST is not set -# CONFIG_MGEODEGX1 is not set -CONFIG_MGEODE_LX=y -CONFIG_MICROCODE=y -CONFIG_MICROCODE_OLD_INTERFACE=y -# CONFIG_MINIX_FS is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_SDHCI=y -# CONFIG_MMIOTRACE is not set -# CONFIG_MOUSE_BCM5974 is not set -CONFIG_MOUSE_PS2=y -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -# CONFIG_MOUSE_PS2_TOUCHKIT is not set -CONFIG_MOUSE_PS2_TRACKPOINT=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MPENTIUMII is not set -# CONFIG_MPENTIUMIII is not set -# CONFIG_MPENTIUMM is not set -# CONFIG_MPSC is not set -# CONFIG_MSDOS_FS is not set -CONFIG_MTD_BLOCK2MTD=y -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_OOPS is not set -CONFIG_MTD_PCI=y -# CONFIG_MTD_TS5500 is not set -# CONFIG_MTRR is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_MWINCHIP2 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set -# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set -# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -# CONFIG_NETFILTER_XT_MATCH_ESP is not set -# CONFIG_NETFILTER_XT_MATCH_HELPER is not set -# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set -# CONFIG_NETFILTER_XT_MATCH_MAC is not set -# CONFIG_NETFILTER_XT_MATCH_MARK is not set -# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set -# CONFIG_NETFILTER_XT_MATCH_STRING is not set -# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set -# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set -# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set -# CONFIG_NETFILTER_XT_TARGET_MARK is not set -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -# CONFIG_NETWORK_FILESYSTEMS is not set -# CONFIG_NET_ETHERNET is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_NET_KEY is not set -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_SCH_DSMARK is not set -# CONFIG_NET_SCH_GRED is not set -# CONFIG_NET_SCH_HFSC is not set -# CONFIG_NET_SCH_HTB is not set -# CONFIG_NET_SCH_INGRESS is not set -# CONFIG_NET_SCH_RED is not set -# CONFIG_NET_SCH_SFQ is not set -# CONFIG_NET_SCH_TBF is not set -# CONFIG_NET_SCH_TEQL is not set -# CONFIG_NF_CONNTRACK_AMANDA is not set -# CONFIG_NF_CONNTRACK_H323 is not set -# CONFIG_NF_CONNTRACK_PPTP is not set -# CONFIG_NF_CONNTRACK_SIP is not set -# CONFIG_NF_NAT_AMANDA is not set -# CONFIG_NF_NAT_H323 is not set -# CONFIG_NF_NAT_PPTP is not set -# CONFIG_NF_NAT_SIP is not set -# CONFIG_NF_NAT_SNMP_BASIC is not set -# CONFIG_NLS is not set -CONFIG_NOHIGHMEM=y -CONFIG_NO_HZ=y -# CONFIG_NSC_GPIO is not set -CONFIG_NVRAM=y -CONFIG_OLPC=y -CONFIG_OPROFILE=y -# CONFIG_OPTIMIZE_INLINING is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -# CONFIG_PARAVIRT_GUEST is not set -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PC8736x_GPIO is not set -CONFIG_PCI=y -# CONFIG_PCIEPORTBUS is not set -# CONFIG_PCI_DEBUG is not set -CONFIG_PCI_DIRECT=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_GOANY is not set -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GODIRECT is not set -# CONFIG_PCI_GOMMCONFIG is not set -CONFIG_PCI_GOOLPC=y -CONFIG_PCI_OLPC=y -CONFIG_PCSPKR_PLATFORM=y -# CONFIG_PDA_POWER is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -CONFIG_PHYSICAL_START=0x100000 -CONFIG_PM=y -CONFIG_PM_DEBUG=y -CONFIG_PM_SLEEP=y -CONFIG_PM_STD_PARTITION="" -# CONFIG_PM_TRACE_RTC is not set -# CONFIG_PM_VERBOSE is not set -CONFIG_PNP=y -CONFIG_PNPACPI=y -# CONFIG_PNP_DEBUG is not set -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -# CONFIG_PPP is not set -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -CONFIG_PROFILING=y -# CONFIG_PROVE_LOCKING is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RELAY=y -# CONFIG_RELOCATABLE is not set -CONFIG_RTC=y -# CONFIG_RT_MUTEX_TESTER is not set -# CONFIG_RWSEM_GENERIC_SPINLOCK is not set -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SCHEDSTATS=y -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_HRTICK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI=y -# CONFIG_SCSI_WAIT_SCAN is not set -# CONFIG_SCx200 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_SDIO_UART is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIO=y -# CONFIG_SERIO_CT82C710 is not set -CONFIG_SERIO_I8042=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SMP is not set -CONFIG_SND_HDA_CODEC_ANALOG=y -CONFIG_SND_HDA_CODEC_ATIHDMI=y -CONFIG_SND_HDA_CODEC_CMEDIA=y -CONFIG_SND_HDA_CODEC_CONEXANT=y -CONFIG_SND_HDA_CODEC_REALTEK=y -CONFIG_SND_HDA_CODEC_SI3054=y -CONFIG_SND_HDA_CODEC_SIGMATEL=y -CONFIG_SND_HDA_CODEC_VIA=y -CONFIG_SND_HDA_GENERIC=y -CONFIG_SND_HDA_HWDEP=y -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDA_POWER_SAVE is not set -CONFIG_SND_PCI=y -# CONFIG_SND_USB is not set -CONFIG_SND_VMASTER=y -# CONFIG_SONYPI is not set -CONFIG_SPARSEMEM_STATIC=y -CONFIG_STRICT_DEVMEM=y -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SYSPROF_TRACER is not set -# CONFIG_TELCLOCK is not set -CONFIG_THERMAL=y -CONFIG_TICK_ONESHOT=y -CONFIG_TIMER_STATS=y -# CONFIG_TOSHIBA is not set -# CONFIG_UDF_FS is not set -CONFIG_UID16=y -CONFIG_USB=y -# CONFIG_USB_ACM is not set -# CONFIG_USB_CATC is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -# CONFIG_USB_HID is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_PWC is not set -# CONFIG_USB_SERIAL is not set -CONFIG_USB_STORAGE=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_SUSPEND=y -CONFIG_USB_UHCI_HCD=y -# CONFIG_USB_USBNET is not set -CONFIG_V4L_USB_DRIVERS=y -# CONFIG_VFAT_FS is not set -CONFIG_VGACON_SOFT_SCROLLBACK=y -CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 -# CONFIG_VGASTATE is not set -CONFIG_VGA_CONSOLE=y -CONFIG_VIDEO_ALLOW_V4L1=y -# CONFIG_VIDEO_CAFE_CCIC is not set -CONFIG_VIDEO_CAPTURE_DRIVERS=y -# CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_MEDIA is not set -# CONFIG_VIDEO_OV7670 is not set -# CONFIG_VIDEO_OVCAMCHIP is not set -CONFIG_VIDEO_SELECT=y -CONFIG_VM86=y -# CONFIG_VMSPLIT_1G is not set -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_2G_OPT is not set -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_3G_OPT is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_W1 is not set -# CONFIG_WATCHDOG is not set -CONFIG_X86=y -CONFIG_X86_32=y -# CONFIG_X86_64 is not set -# CONFIG_X86_ACPI_CPUFREQ is not set -CONFIG_X86_BIOS_REBOOT=y -CONFIG_X86_BSWAP=y -CONFIG_X86_CMPXCHG=y -CONFIG_X86_CPU=y -# CONFIG_X86_CPUFREQ_NFORCE2 is not set -# CONFIG_X86_CPUID is not set -CONFIG_X86_DEBUGCTLMSR=y -# CONFIG_X86_ELAN is not set -# CONFIG_X86_E_POWERSAVER is not set -CONFIG_X86_FIND_SMP_CONFIG=y -CONFIG_X86_GENERIC=y -# CONFIG_X86_GENERICARCH is not set -# CONFIG_X86_GX_SUSPMOD is not set -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_INVLPG=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_L1_CACHE_SHIFT=7 -CONFIG_X86_LOCAL_APIC=y -# CONFIG_X86_LONGHAUL is not set -# CONFIG_X86_LONGRUN is not set -# CONFIG_X86_MCE is not set -CONFIG_X86_MINIMUM_CPU_FAMILY=4 -CONFIG_X86_MPPARSE=y -# CONFIG_X86_MSR is not set -# CONFIG_X86_P4_CLOCKMOD is not set -# CONFIG_X86_PAE is not set -CONFIG_X86_PC=y -CONFIG_X86_PM_TIMER=y -CONFIG_X86_POPAD_OK=y -# CONFIG_X86_POWERNOW_K6 is not set -# CONFIG_X86_POWERNOW_K7 is not set -# CONFIG_X86_POWERNOW_K8 is not set -# CONFIG_X86_PTDUMP is not set -# CONFIG_X86_RDC321X is not set -# CONFIG_X86_REBOOTFIXUPS is not set -# CONFIG_X86_RESERVE_LOW_64K is not set -# CONFIG_X86_SPEEDSTEP_CENTRINO is not set -# CONFIG_X86_SPEEDSTEP_ICH is not set -# CONFIG_X86_SPEEDSTEP_LIB is not set -# CONFIG_X86_SPEEDSTEP_SMI is not set -CONFIG_X86_TSC=y -CONFIG_X86_UP_APIC=y -CONFIG_X86_UP_IOAPIC=y -CONFIG_X86_USE_3DNOW=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_VERBOSE_BOOTUP=y -# CONFIG_X86_VOYAGER is not set -# CONFIG_X86_VSMP is not set -CONFIG_X86_WP_WORKS_OK=y -CONFIG_X86_XADD=y -# CONFIG_ZONE_DMA32 is not set diff --git a/target/linux/olpc/patches-2.6.27/300-block2mtd_init.patch b/target/linux/olpc/patches-2.6.27/300-block2mtd_init.patch deleted file mode 100644 index e16570fdd1..0000000000 --- a/target/linux/olpc/patches-2.6.27/300-block2mtd_init.patch +++ /dev/null @@ -1,205 +0,0 @@ ---- a/arch/x86/kernel/vmlinux_32.lds.S -+++ b/arch/x86/kernel/vmlinux_32.lds.S -@@ -135,6 +135,12 @@ SECTIONS - INITCALLS - __initcall_end = .; - } -+ .root_initcall.init : AT(ADDR(.root_initcall.init) - LOAD_OFFSET) { -+ __root_initcall_start = .; -+ INITCALLS_ROOT -+ __root_initcall_end = .; -+ } -+ - .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) { - __con_initcall_start = .; - *(.con_initcall.init) ---- a/drivers/mtd/devices/block2mtd.c -+++ b/drivers/mtd/devices/block2mtd.c -@@ -18,10 +18,18 @@ - #include - #include - #include -+#include -+#include - - #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) - #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args) - -+struct retry { -+ struct list_head list; -+ const char *val; -+}; -+ -+static LIST_HEAD(retry_list); - - /* Info for the block device */ - struct block2mtd_dev { -@@ -33,10 +41,34 @@ struct block2mtd_dev { - char devname[0]; - }; - -+static int block2mtd_setup2(const char *val); - - /* Static info about the MTD, used in cleanup_module */ - static LIST_HEAD(blkmtd_device_list); - -+static int add_retry(const char *val) { -+ struct retry *r = kmalloc(sizeof(struct retry), GFP_KERNEL); -+ -+ INIT_LIST_HEAD(&r->list); -+ r->val = val; -+ list_add(&r->list, &retry_list); -+ -+ return 0; -+} -+ -+static int __init process_retries(void) { -+ struct list_head *p, *tmp; -+ -+ list_for_each_safe(p, tmp, &retry_list) { -+ struct retry *r = list_entry(p, struct retry, list); -+ block2mtd_setup2(r->val); -+ msleep(100); -+ list_del(p); -+ kfree(r); -+ } -+ return 0; -+} -+rootfs_initcall(process_retries); - - static struct page *page_read(struct address_space *mapping, int index) - { -@@ -510,7 +542,9 @@ static int block2mtd_setup2(const char * - if (token[2] && (strlen(token[2]) + 1 > 80)) - parse_err("mtd device name too long"); - -- add_device(name, erase_size, token[2]); -+ if (add_device(name, erase_size, token[2]) == NULL) { -+ add_retry(val); -+ } - - return 0; - } ---- a/include/asm-generic/vmlinux.lds.h -+++ b/include/asm-generic/vmlinux.lds.h -@@ -375,12 +375,14 @@ - *(.initcall4s.init) \ - *(.initcall5.init) \ - *(.initcall5s.init) \ -- *(.initcallrootfs.init) \ - *(.initcall6.init) \ - *(.initcall6s.init) \ - *(.initcall7.init) \ - *(.initcall7s.init) - -+#define INITCALLS_ROOT \ -+ *(.initcallrootfs.init) -+ - #define PERCPU(align) \ - . = ALIGN(align); \ - VMLINUX_SYMBOL(__per_cpu_start) = .; \ ---- a/init/do_mounts.c -+++ b/init/do_mounts.c -@@ -174,16 +174,8 @@ static int __init fs_names_setup(char *s - return 1; - } - --static unsigned int __initdata root_delay; --static int __init root_delay_setup(char *str) --{ -- root_delay = simple_strtoul(str, NULL, 0); -- return 1; --} -- - __setup("rootflags=", root_data_setup); - __setup("rootfstype=", fs_names_setup); --__setup("rootdelay=", root_delay_setup); - - static void __init get_fs_names(char *page) - { -@@ -359,18 +351,6 @@ void __init prepare_namespace(void) - { - int is_floppy; - -- if (root_delay) { -- printk(KERN_INFO "Waiting %dsec before mounting root device...\n", -- root_delay); -- ssleep(root_delay); -- } -- -- /* wait for the known devices to complete their probing */ -- while (driver_probe_done() != 0) -- msleep(100); -- -- md_run_setup(); -- - if (saved_root_name[0]) { - root_device_name = saved_root_name; - if (!strncmp(root_device_name, "mtd", 3) || ---- a/init/main.c -+++ b/init/main.c -@@ -70,6 +70,7 @@ - #ifdef CONFIG_X86_LOCAL_APIC - #include - #endif -+#include "do_mounts.h" - - /* - * This is one of the first .c files built. Error out early if we have compiler -@@ -745,12 +746,13 @@ int do_one_initcall(initcall_t fn) - - - extern initcall_t __initcall_start[], __initcall_end[], __early_initcall_end[]; -+extern initcall_t __root_initcall_start[], __root_initcall_end[]; - --static void __init do_initcalls(void) -+static void __init do_initcalls(initcall_t *start, initcall_t *end) - { - initcall_t *call; - -- for (call = __early_initcall_end; call < __initcall_end; call++) -+ for (call = start; call < end; call++) - do_one_initcall(*call); - - /* Make sure there is no pending stuff from the initcall sequence */ -@@ -772,7 +774,7 @@ static void __init do_basic_setup(void) - usermodehelper_init(); - driver_init(); - init_irq_proc(); -- do_initcalls(); -+ do_initcalls(__early_initcall_end, __initcall_end); - } - - static void __init do_pre_smp_initcalls(void) -@@ -833,6 +835,13 @@ static int noinline init_post(void) - panic("No init found. Try passing init= option to kernel."); - } - -+static unsigned int __initdata root_delay; -+static int __init root_delay_setup(char *str) -+{ -+ root_delay = simple_strtoul(str, NULL, 0); -+ return 1; -+} -+__setup("rootdelay=", root_delay_setup); - static int __init kernel_init(void * unused) - { - lock_kernel(); -@@ -873,7 +882,16 @@ static int __init kernel_init(void * unu - - if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) { - ramdisk_execute_command = NULL; -- prepare_namespace(); -+ if (root_delay) { -+ printk(KERN_INFO "Waiting %desc before mounting root device...\n", -+ root_delay); -+ ssleep(root_delay); -+ } -+ while (driver_probe_done() != 0) -+ msleep(100); -+ md_run_setup(); -+ do_initcalls(__root_initcall_start, __root_initcall_end); -+ prepare_namespace(); - } - - /*