From: Rafał Miłecki Date: Thu, 8 Apr 2021 07:12:43 +0000 (+0200) Subject: bcm4908: enable target & Asus GT-AC5300 image X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5e78cb9b85a045f436abf6a03aa5c774d30e1090;p=openwrt%2Fstaging%2Fynezz.git bcm4908: enable target & Asus GT-AC5300 image OpenWrt was succesfully tested on the GT-AC5300 model. It's possible to: 1. Install OpenWrt using vendor UI 2. Perform UBI aware sysupgrade 3. Install vendor firmware using OpenWrt sysupgrade Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/bcm4908/Makefile b/target/linux/bcm4908/Makefile index 4edd0ccfa8..ce5f230ca6 100644 --- a/target/linux/bcm4908/Makefile +++ b/target/linux/bcm4908/Makefile @@ -5,7 +5,7 @@ include $(TOPDIR)/rules.mk ARCH:=aarch64 BOARD:=bcm4908 BOARDNAME:=Broadcom BCM4908 (ARMv8A CPUs Brahma-B53) -FEATURES:=squashfs nand usb pci pcie gpio source-only +FEATURES:=squashfs nand usb pci pcie gpio CPU_TYPE:=cortex-a53 SUBTARGETS:=generic diff --git a/target/linux/bcm4908/image/Makefile b/target/linux/bcm4908/image/Makefile index bc0ee09c19..8a2d4dc174 100644 --- a/target/linux/bcm4908/image/Makefile +++ b/target/linux/bcm4908/image/Makefile @@ -71,6 +71,7 @@ define Device/netgear_r8000p IMAGE/chk := append-ubi | bcm4908img | netgear-chk NETGEAR_BOARD_ID := U12H359T00_NETGEAR NETGEAR_REGION := 1 + BROKEN := y endef TARGET_DEVICES += netgear_r8000p @@ -81,6 +82,7 @@ define Device/tplink_archer-c2300-v1 DEVICE_DTS := broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1 IMAGES := bin IMAGE/bin := append-ubi | bcm4908img + BROKEN := y endef TARGET_DEVICES += tplink_archer-c2300-v1