From: Gabor Juhos Date: Wed, 20 Jan 2010 09:30:36 +0000 (+0000) Subject: rtl8366_smi: add Kconfig option for the debugfs stuff X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5e5451a54d2c3bcca2e876be4a2d34b8da59b9b8;p=openwrt%2Fstaging%2Frobimarko.git rtl8366_smi: add Kconfig option for the debugfs stuff SVN-Revision: 19243 --- diff --git a/target/linux/ar71xx/config-2.6.30 b/target/linux/ar71xx/config-2.6.30 index 6984319820..22aff9bda2 100644 --- a/target/linux/ar71xx/config-2.6.30 +++ b/target/linux/ar71xx/config-2.6.30 @@ -185,6 +185,7 @@ CONFIG_PHYLIB=y # CONFIG_PROBE_INITRD_HEADER is not set CONFIG_RTL8306_PHY=y CONFIG_RTL8366_SMI=y +# CONFIG_RTL8366_SMI_DEBUG_FS is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_SCSI_DMA is not set # CONFIG_SERIAL_8250_EXTENDED is not set diff --git a/target/linux/ar71xx/config-2.6.31 b/target/linux/ar71xx/config-2.6.31 index 11543ab4e9..ef62b7d17c 100644 --- a/target/linux/ar71xx/config-2.6.31 +++ b/target/linux/ar71xx/config-2.6.31 @@ -190,6 +190,7 @@ CONFIG_PHYLIB=y # CONFIG_PROBE_INITRD_HEADER is not set CONFIG_RTL8306_PHY=y CONFIG_RTL8366_SMI=y +# CONFIG_RTL8366_SMI_DEBUG_FS is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_SCSI_DMA is not set # CONFIG_SERIAL_8250_EXTENDED is not set diff --git a/target/linux/ar71xx/config-2.6.32 b/target/linux/ar71xx/config-2.6.32 index 8c958af491..8077926b6d 100644 --- a/target/linux/ar71xx/config-2.6.32 +++ b/target/linux/ar71xx/config-2.6.32 @@ -193,6 +193,7 @@ CONFIG_PHYLIB=y # CONFIG_PROBE_INITRD_HEADER is not set CONFIG_RTL8306_PHY=y CONFIG_RTL8366_SMI=y +# CONFIG_RTL8366_SMI_DEBUG_FS is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y # CONFIG_SCSI_DMA is not set # CONFIG_SERIAL_8250_EXTENDED is not set diff --git a/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c b/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c index 1043b3d44e..a6ca06e67c 100644 --- a/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c +++ b/target/linux/ar71xx/files/drivers/net/phy/rtl8366_smi.c @@ -21,9 +21,7 @@ #include #include -/* #define DEBUG 1 */ - -#ifdef DEBUG +#ifdef CONFIG_RTL8366_SMI_DEBUG_FS #include #endif @@ -210,12 +208,12 @@ struct rtl8366_smi { struct switch_dev dev; int mii_irq[PHY_MAX_ADDR]; char buf[4096]; -#ifdef DEBUG +#ifdef CONFIG_RTL8366_SMI_DEBUG_FS struct dentry *debugfs_root; #endif }; -#ifdef DEBUG +#ifdef CONFIG_RTL8366_SMI_DEBUG_FS u16 g_dbg_reg; #endif @@ -972,7 +970,7 @@ static int rtl8366s_reset_vlan(struct rtl8366_smi *smi) return 0; } -#ifdef DEBUG +#ifdef CONFIG_RTL8366_SMI_DEBUG_FS static int rtl8366_debugfs_open(struct inode *inode, struct file *file) { file->private_data = inode->i_private; @@ -1197,7 +1195,7 @@ static void rtl8366_debugfs_remove(struct rtl8366_smi *smi) #else static inline void rtl8366_debugfs_init(struct rtl8366_smi *smi) {} static inline void rtl8366_debugfs_remove(struct rtl8366_smi *smi) {} -#endif +#endif /* CONFIG_RTL8366_SMI_DEBUG_FS */ static int rtl8366_global_reset_mibs(struct switch_dev *dev, const struct switch_attr *attr, diff --git a/target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch index 77874b49f6..23dc525ece 100644 --- a/target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch +++ b/target/linux/ar71xx/patches-2.6.30/204-rtl8366-smi-driver.patch @@ -1,12 +1,18 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -140,4 +140,8 @@ config MDIO_GPIO +@@ -140,4 +140,14 @@ config MDIO_GPIO To compile this driver as a module, choose M here: the module will be called mdio-gpio. +config RTL8366_SMI + tristate "Support for RTL8366 switch via SMI interface" + depends on GENERIC_GPIO ++ ++config RTL8366_SMI_DEBUG_FS ++ bool "RTL8366S driver DEBUG_FS support" ++ depends on RTL8366_SMI ++ depends on DEBUG_FS ++ default n + endif # PHYLIB --- a/drivers/net/phy/Makefile diff --git a/target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch index 77874b49f6..23dc525ece 100644 --- a/target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch +++ b/target/linux/ar71xx/patches-2.6.31/204-rtl8366-smi-driver.patch @@ -1,12 +1,18 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -140,4 +140,8 @@ config MDIO_GPIO +@@ -140,4 +140,14 @@ config MDIO_GPIO To compile this driver as a module, choose M here: the module will be called mdio-gpio. +config RTL8366_SMI + tristate "Support for RTL8366 switch via SMI interface" + depends on GENERIC_GPIO ++ ++config RTL8366_SMI_DEBUG_FS ++ bool "RTL8366S driver DEBUG_FS support" ++ depends on RTL8366_SMI ++ depends on DEBUG_FS ++ default n + endif # PHYLIB --- a/drivers/net/phy/Makefile diff --git a/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch b/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch index 78ec2e44c0..383513cda7 100644 --- a/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch +++ b/target/linux/ar71xx/patches-2.6.32/204-rtl8366-smi-driver.patch @@ -1,12 +1,18 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -146,4 +146,8 @@ config MDIO_GPIO +@@ -146,4 +146,14 @@ config MDIO_GPIO To compile this driver as a module, choose M here: the module will be called mdio-gpio. +config RTL8366_SMI + tristate "Support for RTL8366 switch via SMI interface" + depends on GENERIC_GPIO ++ ++config RTL8366_SMI_DEBUG_FS ++ bool "RTL8366S driver DEBUG_FS support" ++ depends on RTL8366_SMI ++ depends on DEBUG_FS ++ default n + endif # PHYLIB --- a/drivers/net/phy/Makefile