From: raghavendra.koushik@neterion.com Date: Wed, 3 Aug 2005 19:27:09 +0000 (-0700) Subject: [PATCH] S2io: Hardware fixes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5e25b9ddb6683fe225a2266b53d73c57381a0c18;p=openwrt%2Fstaging%2Fblogic.git [PATCH] S2io: Hardware fixes Hi, Below patch addresses few h/w specific issues. 1. Check for additional ownership bit on Rx path before starting Rx processing. 2. Enable only 4 PCCs(Per Context Controller) for Xframe I revisions less than 4. 3. Program Rx and Tx round robin registers depending on no. of rings/FIFOs. 4. Tx continous interrupts is now a loadable parameter. 5. Reset the card if we get double-bit ECC errors. 6. A soft reset of XGXS being done to force a link state change has been eliminated. 7. After a reset, clear "parity error detected" bit, PCI-X ECC status register, and PCI_STATUS bit in tx_pic_int register. 8. The error in the disabling allmulticast implementation has been rectified. 9. Leave the PCI-X parameters MMRBC, OST etc. at their BIOS/system defaults. Signed-off-by: Ravinandan Arakali Signed-off-by: Raghavendra Koushik Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 8746740e6efd..826deb0eb03a 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -62,6 +62,7 @@ typedef struct _XENA_dev_config { #define ADAPTER_STATUS_RMAC_REMOTE_FAULT BIT(6) #define ADAPTER_STATUS_RMAC_LOCAL_FAULT BIT(7) #define ADAPTER_STATUS_RMAC_PCC_IDLE vBIT(0xFF,8,8) +#define ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE vBIT(0x0F,8,8) #define ADAPTER_STATUS_RC_PRC_QUIESCENT vBIT(0xFF,16,8) #define ADAPTER_STATUS_MC_DRAM_READY BIT(24) #define ADAPTER_STATUS_MC_QUEUES_READY BIT(25) @@ -245,6 +246,7 @@ typedef struct _XENA_dev_config { #define STAT_TRSF_PER(n) TBD #define PER_SEC 0x208d5 #define SET_UPDT_PERIOD(n) vBIT((PER_SEC*n),32,32) +#define SET_UPDT_CLICKS(val) vBIT(val, 32, 32) u64 stat_addr; @@ -289,6 +291,7 @@ typedef struct _XENA_dev_config { u64 pcc_err_reg; #define PCC_FB_ECC_DB_ERR vBIT(0xFF, 16, 8) +#define PCC_ENABLE_FOUR vBIT(0x0F,0,8) u64 pcc_err_mask; u64 pcc_err_alarm; @@ -690,6 +693,10 @@ typedef struct _XENA_dev_config { #define MC_ERR_REG_MIRI_CRI_ERR_0 BIT(22) #define MC_ERR_REG_MIRI_CRI_ERR_1 BIT(23) #define MC_ERR_REG_SM_ERR BIT(31) +#define MC_ERR_REG_ECC_ALL_SNG (BIT(6) | \ + BIT(7) | BIT(17) | BIT(19)) +#define MC_ERR_REG_ECC_ALL_DBL (BIT(14) | \ + BIT(15) | BIT(18) | BIT(20)) u64 mc_err_mask; u64 mc_err_alarm; diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 0721e78dd8b0..e2144fc7df9a 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -68,6 +68,16 @@ static char s2io_driver_name[] = "Neterion"; static char s2io_driver_version[] = "Version 1.7.7"; +static inline int RXD_IS_UP2DT(RxD_t *rxdp) +{ + int ret; + + ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) && + (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK)); + + return ret; +} + /* * Cards with following subsystem_id have a link state indication * problem, 600B, 600C, 600D, 640B, 640C and 640D. @@ -230,6 +240,7 @@ static unsigned int rx_ring_sz[MAX_RX_RINGS] = static unsigned int Stats_refresh_time = 4; static unsigned int rts_frm_len[MAX_RX_RINGS] = {[0 ...(MAX_RX_RINGS - 1)] = 0 }; +static unsigned int use_continuous_tx_intrs = 1; static unsigned int rmac_pause_time = 65535; static unsigned int mc_pause_threshold_q0q3 = 187; static unsigned int mc_pause_threshold_q4q7 = 187; @@ -638,7 +649,7 @@ static int init_nic(struct s2io_nic *nic) mac_control = &nic->mac_control; config = &nic->config; - /* to set the swapper control on the card */ + /* to set the swapper controle on the card */ if(s2io_set_swapper(nic)) { DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n"); return -1; @@ -756,6 +767,13 @@ static int init_nic(struct s2io_nic *nic) val64 |= BIT(0); /* To enable the FIFO partition. */ writeq(val64, &bar0->tx_fifo_partition_0); + /* + * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug + * SXE-008 TRANSMIT DMA ARBITRATION ISSUE. + */ + if (get_xena_rev_id(nic->pdev) < 4) + writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable); + val64 = readq(&bar0->tx_fifo_partition_0); DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n", &bar0->tx_fifo_partition_0, (unsigned long long) val64); @@ -823,37 +841,250 @@ static int init_nic(struct s2io_nic *nic) } writeq(val64, &bar0->rx_queue_cfg); - /* Initializing the Tx round robin registers to 0 - * filling tx and rx round robin registers as per - * the number of FIFOs and Rings is still TODO - */ - writeq(0, &bar0->tx_w_round_robin_0); - writeq(0, &bar0->tx_w_round_robin_1); - writeq(0, &bar0->tx_w_round_robin_2); - writeq(0, &bar0->tx_w_round_robin_3); - writeq(0, &bar0->tx_w_round_robin_4); - /* - * TODO - * Disable Rx steering. Hard coding all packets to be steered to - * Queue 0 for now. + * Filling Tx round robin registers + * as per the number of FIFOs */ - val64 = 0x8080808080808080ULL; - writeq(val64, &bar0->rts_qos_steering); + switch (config->tx_fifo_num) { + case 1: + val64 = 0x0000000000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + writeq(val64, &bar0->tx_w_round_robin_1); + writeq(val64, &bar0->tx_w_round_robin_2); + writeq(val64, &bar0->tx_w_round_robin_3); + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 2: + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0100000100000100ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0001000001000001ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0100000000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 3: + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0001020000010001ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0200000100010200ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0001020000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 4: + val64 = 0x0001020300010200ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0100000102030001ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0200010000010203ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0001020001000001ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0203000100000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 5: + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0001000000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 6: + val64 = 0x0001020304000102ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0304050001020001ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0203000100000102ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0304000102030405ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0001000200000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 7: + val64 = 0x0001020001020300ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0102030400010203ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0405060001020001ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0304050000010200ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0102030000000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + case 8: + val64 = 0x0001020300040105ULL; + writeq(val64, &bar0->tx_w_round_robin_0); + val64 = 0x0200030106000204ULL; + writeq(val64, &bar0->tx_w_round_robin_1); + val64 = 0x0103000502010007ULL; + writeq(val64, &bar0->tx_w_round_robin_2); + val64 = 0x0304010002060500ULL; + writeq(val64, &bar0->tx_w_round_robin_3); + val64 = 0x0103020400000000ULL; + writeq(val64, &bar0->tx_w_round_robin_4); + break; + } + + /* Filling the Rx round robin registers as per the + * number of Rings and steering based on QoS. + */ + switch (config->rx_ring_num) { + case 1: + val64 = 0x8080808080808080ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 2: + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0100000100000100ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0001000001000001ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0000010000010000ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0100000000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080808040404040ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 3: + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0001020000010001ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0200000100010200ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0001000102000001ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0001020000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080804040402020ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 4: + val64 = 0x0001020300010200ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0100000102030001ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0200010000010203ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0001020001000001ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0203000100000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080404020201010ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 5: + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0001000203000102ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0001020001030004ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0001000000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080404020201008ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 6: + val64 = 0x0001020304000102ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0304050001020001ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0203000100000102ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0304000102030405ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0001000200000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080404020100804ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 7: + val64 = 0x0001020001020300ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0102030400010203ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0405060001020001ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0304050000010200ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0102030000000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8080402010080402ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + case 8: + val64 = 0x0001020300040105ULL; + writeq(val64, &bar0->rx_w_round_robin_0); + val64 = 0x0200030106000204ULL; + writeq(val64, &bar0->rx_w_round_robin_1); + val64 = 0x0103000502010007ULL; + writeq(val64, &bar0->rx_w_round_robin_2); + val64 = 0x0304010002060500ULL; + writeq(val64, &bar0->rx_w_round_robin_3); + val64 = 0x0103020400000000ULL; + writeq(val64, &bar0->rx_w_round_robin_4); + + val64 = 0x8040201008040201ULL; + writeq(val64, &bar0->rts_qos_steering); + break; + } /* UDP Fix */ val64 = 0; for (i = 0; i < 8; i++) writeq(val64, &bar0->rts_frm_len_n[i]); - /* Set the default rts frame length for ring0 */ - writeq(MAC_RTS_FRM_LEN_SET(dev->mtu+22), - &bar0->rts_frm_len_n[0]); + /* Set the default rts frame length for the rings configured */ + val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22); + for (i = 0 ; i < config->rx_ring_num ; i++) + writeq(val64, &bar0->rts_frm_len_n[i]); + + /* Set the frame length for the configured rings + * desired by the user + */ + for (i = 0; i < config->rx_ring_num; i++) { + /* If rts_frm_len[i] == 0 then it is assumed that user not + * specified frame length steering. + * If the user provides the frame length then program + * the rts_frm_len register for those values or else + * leave it as it is. + */ + if (rts_frm_len[i] != 0) { + writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]), + &bar0->rts_frm_len_n[i]); + } + } /* Program statistics memory */ writeq(mac_control->stats_mem_phy, &bar0->stat_addr); val64 = SET_UPDT_PERIOD(Stats_refresh_time) | - STAT_CFG_STAT_RO | STAT_CFG_STAT_EN; + STAT_CFG_STAT_RO | STAT_CFG_STAT_EN; writeq(val64, &bar0->stat_cfg); /* @@ -877,13 +1108,14 @@ static int init_nic(struct s2io_nic *nic) val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078) | TTI_DATA1_MEM_TX_URNG_A(0xA) | TTI_DATA1_MEM_TX_URNG_B(0x10) | - TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN | - TTI_DATA1_MEM_TX_TIMER_CI_EN; + TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN; + if (use_continuous_tx_intrs) + val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; writeq(val64, &bar0->tti_data1_mem); val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | TTI_DATA2_MEM_TX_UFC_B(0x20) | - TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80); + TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80); writeq(val64, &bar0->tti_data2_mem); val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD; @@ -927,10 +1159,11 @@ static int init_nic(struct s2io_nic *nic) writeq(val64, &bar0->rti_command_mem); /* - * Once the operation completes, the Strobe bit of the command - * register will be reset. We poll for this particular condition - * We wait for a maximum of 500ms for the operation to complete, - * if it's not complete by then we return error. + * Once the operation completes, the Strobe bit of the + * command register will be reset. We poll for this + * particular condition. We wait for a maximum of 500ms + * for the operation to complete, if it's not complete + * by then we return error. */ time = 0; while (TRUE) { @@ -1185,10 +1418,10 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) temp64 &= ~((u64) val64); writeq(temp64, &bar0->general_int_mask); /* - * All MC block error interrupts are disabled for now. - * TODO + * Enable all MC Intrs. */ - writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask); + writeq(0x0, &bar0->mc_int_mask); + writeq(0x0, &bar0->mc_err_mask); } else if (flag == DISABLE_INTRS) { /* * Disable MC Intrs in the general intr mask register @@ -1247,23 +1480,41 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag) } } -static int check_prc_pcc_state(u64 val64, int flag) +static int check_prc_pcc_state(u64 val64, int flag, int rev_id) { int ret = 0; if (flag == FALSE) { - if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT)) { - ret = 1; + if (rev_id >= 4) { + if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) && + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + ret = 1; + } + } else { + if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) && + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT)) { + ret = 1; + } } } else { - if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == - ADAPTER_STATUS_RMAC_PCC_IDLE) && - (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || - ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == - ADAPTER_STATUS_RC_PRC_QUIESCENT))) { - ret = 1; + if (rev_id >= 4) { + if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) == + ADAPTER_STATUS_RMAC_PCC_IDLE) && + (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT))) { + ret = 1; + } + } else { + if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) == + ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) && + (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) || + ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) == + ADAPTER_STATUS_RC_PRC_QUIESCENT))) { + ret = 1; + } } } @@ -1286,6 +1537,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag) { int ret = 0; u64 tmp64 = ~((u64) val64); + int rev_id = get_xena_rev_id(sp->pdev); if (! (tmp64 & @@ -1294,7 +1546,7 @@ static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag) ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY | ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK | ADAPTER_STATUS_P_PLL_LOCK))) { - ret = check_prc_pcc_state(val64, flag); + ret = check_prc_pcc_state(val64, flag, rev_id); } return ret; @@ -1407,7 +1659,7 @@ static int start_nic(struct s2io_nic *nic) /* Enable select interrupts */ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR | - RX_MAC_INTR; + RX_MAC_INTR | MC_INTR; en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS); /* @@ -1439,21 +1691,6 @@ static int start_nic(struct s2io_nic *nic) */ schedule_work(&nic->set_link_task); - /* - * Here we are performing soft reset on XGXS to - * force link down. Since link is already up, we will get - * link state change interrupt after this reset - */ - SPECIAL_REG_WRITE(0x80010515001E0000ULL, &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - udelay(50); - SPECIAL_REG_WRITE(0x80010515001E00E0ULL, &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - udelay(50); - SPECIAL_REG_WRITE(0x80070515001F00E4ULL, &bar0->dtx_control, UF); - val64 = readq(&bar0->dtx_control); - udelay(50); - return SUCCESS; } @@ -1524,7 +1761,7 @@ static void stop_nic(struct s2io_nic *nic) /* Disable all interrupts */ interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR | - RX_MAC_INTR; + RX_MAC_INTR | MC_INTR; en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS); /* Disable PRCs */ @@ -1737,6 +1974,7 @@ int fill_rx_buffers(struct s2io_nic *nic, int ring_no) off++; mac_control->rings[ring_no].rx_curr_put_info.offset = off; #endif + rxdp->Control_2 |= SET_RXD_MARKER; atomic_inc(&nic->rx_bufs_left[ring_no]); alloc_tab++; @@ -1965,11 +2203,8 @@ static void rx_intr_handler(ring_info_t *ring_data) put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) + put_info.offset; #endif - while ((!(rxdp->Control_1 & RXD_OWN_XENA)) && -#ifdef CONFIG_2BUFF_MODE - (!rxdp->Control_2 & BIT(0)) && -#endif - (((get_offset + 1) % ring_bufs) != put_offset)) { + while (RXD_IS_UP2DT(rxdp) && + (((get_offset + 1) % ring_bufs) != put_offset)) { skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control); if (skb == NULL) { DBG_PRINT(ERR_DBG, "%s: The skb is ", @@ -2153,6 +2388,21 @@ static void alarm_intr_handler(struct s2io_nic *nic) schedule_work(&nic->set_link_task); } + /* Handling Ecc errors */ + val64 = readq(&bar0->mc_err_reg); + writeq(val64, &bar0->mc_err_reg); + if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) { + if (val64 & MC_ERR_REG_ECC_ALL_DBL) { + DBG_PRINT(ERR_DBG, "%s: Device indicates ", + dev->name); + DBG_PRINT(ERR_DBG, "double ECC error!!\n"); + netif_stop_queue(dev); + schedule_work(&nic->rst_timer_task); + } else { + /* Device can recover from Single ECC errors */ + } + } + /* In case of a serious error, the device will be Reset. */ val64 = readq(&bar0->serr_source); if (val64 & SERR_SOURCE_ANY) { @@ -2226,7 +2476,7 @@ void s2io_reset(nic_t * sp) { XENA_dev_config_t __iomem *bar0 = sp->bar0; u64 val64; - u16 subid; + u16 subid, pci_cmd; val64 = SW_RESET_ALL; writeq(val64, &bar0->sw_reset); @@ -2255,6 +2505,18 @@ void s2io_reset(nic_t * sp) /* Set swapper to enable I/O register access */ s2io_set_swapper(sp); + /* Clear certain PCI/PCI-X fields after reset */ + pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); + pci_cmd &= 0x7FFF; /* Clear parity err detect bit */ + pci_write_config_word(sp->pdev, PCI_COMMAND, pci_cmd); + + val64 = readq(&bar0->txpic_int_reg); + val64 &= ~BIT(62); /* Clearing PCI_STATUS error reflected here */ + writeq(val64, &bar0->txpic_int_reg); + + /* Clearing PCIX Ecc status register */ + pci_write_config_dword(sp->pdev, 0x68, 0); + /* Reset device statistics maintained by OS */ memset(&sp->stats, 0, sizeof (struct net_device_stats)); @@ -2797,6 +3059,8 @@ static void s2io_set_multicast(struct net_device *dev) /* Disable all Multicast addresses */ writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr), &bar0->rmac_addr_data0_mem); + writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0), + &bar0->rmac_addr_data1_mem); val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD | RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos); @@ -4369,21 +4633,6 @@ static void s2io_init_pci(nic_t * sp) (pci_cmd | PCI_COMMAND_PARITY)); pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd); - /* Set MMRB count to 1024 in PCI-X Command register. */ - pcix_cmd &= 0xFFF3; - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - (pcix_cmd | (0x1 << 2))); /* MMRBC 1K */ - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(pcix_cmd)); - - /* Setting Maximum outstanding splits based on system type. */ - pcix_cmd &= 0xFF8F; - pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1); /* 2 splits. */ - pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - pcix_cmd); - pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, - &(pcix_cmd)); - /* Forcibly disabling relaxed ordering capability of the card. */ pcix_cmd &= 0xfffd; pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, @@ -4400,6 +4649,7 @@ module_param_array(tx_fifo_len, uint, NULL, 0); module_param_array(rx_ring_sz, uint, NULL, 0); module_param(Stats_refresh_time, int, 0); module_param_array(rts_frm_len, uint, NULL, 0); +module_param(use_continuous_tx_intrs, int, 1); module_param(rmac_pause_time, int, 0); module_param(mc_pause_threshold_q0q3, int, 0); module_param(mc_pause_threshold_q4q7, int, 0); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 4d2fc7a40434..92db59a0fb11 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -372,6 +372,10 @@ typedef struct _RxD_t { #define RXD_GET_L4_CKSUM(val) ((u16)(val) & 0xFFFF) u64 Control_2; +#define THE_RXD_MARK 0x3 +#define SET_RXD_MARKER vBIT(THE_RXD_MARK, 0, 2) +#define GET_RXD_MARKER(ctrl) ((ctrl & SET_RXD_MARKER) >> 62) + #ifndef CONFIG_2BUFF_MODE #define MASK_BUFFER0_SIZE vBIT(0x3FFF,2,14) #define SET_BUFFER0_SIZE(val) vBIT(val,2,14)