From: Felix Fietkau Date: Tue, 4 Dec 2007 12:49:54 +0000 (+0000) Subject: Fix VLYNQ device enable for DG834Gv1 X-Git-Tag: 8.09_rc1~2152 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5dc134c5420579de99dcdbde07882caaac53ec71;p=openwrt%2Fsvn-archive%2Fopenwrt.git Fix VLYNQ device enable for DG834Gv1 This patch allows VLYNQ devices on the DG834Gv1 to be successfully enabled. Currently the "__vlynq_enable_device" function attempts to set the VLYNQ device clock divisor to values from 1 through 8 until a link is successfully established. On the DG834Gv1 (but not the DG834Gv2), setting the VLYNQ device clock divisor to 1 (full rate) results in all further VLYNQ operations failing (including software reset), so the device is never enabled. This patches changes the function to only attempt divisors 2 through 8, and hence the device is successfully enabled. Signed-off-by: Nick Forbes --------- SVN-Revision: 9656 --- diff --git a/target/linux/ar7/files/drivers/vlynq/vlynq.c b/target/linux/ar7/files/drivers/vlynq/vlynq.c index 0dd6c18307..374562c6cd 100644 --- a/target/linux/ar7/files/drivers/vlynq/vlynq.c +++ b/target/linux/ar7/files/drivers/vlynq/vlynq.c @@ -373,7 +373,7 @@ static int __vlynq_enable_device(struct vlynq_device *dev) case vlynq_div_auto: /* Only try locally supplied clock, others cause problems */ vlynq_reg_write(dev->remote->control, 0); - for (i = vlynq_ldiv1; i <= vlynq_ldiv8; i++) { + for (i = vlynq_ldiv2; i <= vlynq_ldiv8; i++) { vlynq_reg_write(dev->local->control, VLYNQ_CTRL_CLOCK_INT | VLYNQ_CTRL_CLOCK_DIV(i - vlynq_ldiv1));