From: Mauro Carvalho Chehab Date: Mon, 18 Aug 2014 11:51:29 +0000 (-0300) Subject: [media] au0828: fill tuner type on all boards X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5d40018623a53f5e21cb3393ab9ef2a3a7bc57dd;p=openwrt%2Fstaging%2Fblogic.git [media] au0828: fill tuner type on all boards This is used by the I2C code in order to slow down the speed to 20 kHz on devices with xc5000 or xc5000c. So, it needs to be filled for all devices that use either xc5000 or xc5000c. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/au0828/au0828-cards.c b/drivers/media/usb/au0828/au0828-cards.c index 9fd3c4b222f6..9eb77ac2153b 100644 --- a/drivers/media/usb/au0828/au0828-cards.c +++ b/drivers/media/usb/au0828/au0828-cards.c @@ -98,20 +98,20 @@ struct au0828_board au0828_boards[] = { }, [AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL] = { .name = "Hauppauge HVR950Q rev xxF8", - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_DVICO_FUSIONHDTV7] = { .name = "DViCO FusionHDTV USB", - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, [AU0828_BOARD_HAUPPAUGE_WOODBURY] = { .name = "Hauppauge Woodbury", - .tuner_type = UNSET, - .tuner_addr = ADDR_UNSET, + .tuner_type = TUNER_NXP_TDA18271, + .tuner_addr = 0x60, .i2c_clk_divider = AU0828_I2C_CLK_250KHZ, }, };