From: Jan Hoffmann Date: Sat, 6 May 2023 17:28:54 +0000 (+0200) Subject: realtek: fix standalone ports in presence of static fdb entries X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5d34fc92eccc7d8f3fd35fd5841c110ca1aefc13;p=openwrt%2Fstaging%2Fthess.git realtek: fix standalone ports in presence of static fdb entries The registers L2_PORT_STATIC_MV_ACT seem to specify the action to take when the source address of a packet exists as a static fdb entry on another port. By default the configured action is to drop such packets. For standalone ports, this behaviour is undesired, as all traffic should be forwarded to the CPU. So change the action to forward on standalone ports. A situation where this issue can occur is when a non-offloaded bond interface is part of a bridge. In that case, the CPU port will have fdb entries for devices connected to the bond interface, which are managed by the assisted learning feature. For now, this is only implemented for RTL838x/RTL839x, as the available set of registers differs for the other devices. Signed-off-by: Jan Hoffmann --- diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c index b5b39336a6..2d603cd42c 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c @@ -197,6 +197,14 @@ static int rtl83xx_setup(struct dsa_switch *ds) } priv->r->traffic_set(priv->cpu_port, BIT_ULL(priv->cpu_port)); + /* For standalone ports, forward packets even if a static fdb + * entry for the source address exists on another port. + */ + if (priv->r->set_static_move_action) { + for (i = 0; i <= priv->cpu_port; i++) + priv->r->set_static_move_action(i, true); + } + if (priv->family_id == RTL8380_FAMILY_ID) rtl838x_print_matrix(); else @@ -1217,6 +1225,10 @@ static int rtl83xx_port_bridge_join(struct dsa_switch *ds, int port, priv->r->traffic_set(port, v); } priv->ports[port].pm |= port_bitmap; + + if (priv->r->set_static_move_action) + priv->r->set_static_move_action(port, false); + mutex_unlock(&priv->reg_mutex); return 0; @@ -1258,6 +1270,9 @@ static void rtl83xx_port_bridge_leave(struct dsa_switch *ds, int port, } priv->ports[port].pm &= ~port_bitmap; + if (priv->r->set_static_move_action) + priv->r->set_static_move_action(port, true); + mutex_unlock(&priv->reg_mutex); } diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c index 9ce5098979..74ad031276 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.c @@ -559,6 +559,15 @@ static void rtl838x_enable_bcast_flood(int port, bool enable) } +static void rtl838x_set_static_move_action(int port, bool forward) +{ + int shift = MV_ACT_PORT_SHIFT(port); + u32 val = forward ? MV_ACT_FORWARD : MV_ACT_DROP; + + sw_w32_mask(MV_ACT_MASK << shift, val << shift, + RTL838X_L2_PORT_STATIC_MV_ACT(port)); +} + static void rtl838x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { int i; @@ -1750,6 +1759,7 @@ const struct rtl838x_reg rtl838x_reg = { .enable_flood = rtl838x_enable_flood, .enable_mcast_flood = rtl838x_enable_mcast_flood, .enable_bcast_flood = rtl838x_enable_bcast_flood, + .set_static_move_action = rtl838x_set_static_move_action, .stp_get = rtl838x_stp_get, .stp_set = rtl838x_stp_set, .mac_port_ctrl = rtl838x_mac_port_ctrl, diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h index 19049e4c95..3f1f1d49f8 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h @@ -251,6 +251,19 @@ #define RTL930X_L2_PORT_NEW_SA_FWD(p) (0x8FF4 + (((p / 10) << 2))) #define RTL931X_L2_PORT_NEW_SA_FWD(p) (0xC830 + (((p / 10) << 2))) +#define RTL838X_L2_PORT_MV_ACT(p) (0x335c + (((p >> 4) << 2))) +#define RTL839X_L2_PORT_MV_ACT(p) (0x3b80 + (((p >> 4) << 2))) + +#define RTL838X_L2_PORT_STATIC_MV_ACT(p) (0x327c + (((p >> 4) << 2))) +#define RTL839X_L2_PORT_STATIC_MV_ACT(p) (0x38dc + (((p >> 4) << 2))) + +#define MV_ACT_PORT_SHIFT(p) ((p % 16) * 2) +#define MV_ACT_MASK 0x3 +#define MV_ACT_FORWARD 0 +#define MV_ACT_DROP 1 +#define MV_ACT_TRAP2CPU 2 +#define MV_ACT_COPY2CPU 3 + #define RTL930X_ST_CTRL (0x8798) #define RTL930X_L2_PORT_SABLK_CTRL (0x905c) @@ -982,6 +995,7 @@ struct rtl838x_reg { void (*enable_flood)(int port, bool enable); void (*enable_mcast_flood)(int port, bool enable); void (*enable_bcast_flood)(int port, bool enable); + void (*set_static_move_action)(int port, bool forward); void (*stp_get)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]); void (*stp_set)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]); int (*mac_force_mode_ctrl)(int port); diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c index 986a4b5f45..c34bff78d7 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl839x.c @@ -602,6 +602,16 @@ static void rtl839x_enable_bcast_flood(int port, bool enable) { } + +static void rtl839x_set_static_move_action(int port, bool forward) +{ + int shift = MV_ACT_PORT_SHIFT(port); + u32 val = forward ? MV_ACT_FORWARD : MV_ACT_DROP; + + sw_w32_mask(MV_ACT_MASK << shift, val << shift, + RTL839X_L2_PORT_STATIC_MV_ACT(port)); +} + irqreturn_t rtl839x_switch_irq(int irq, void *dev_id) { struct dsa_switch *ds = dev_id; @@ -1893,6 +1903,7 @@ const struct rtl838x_reg rtl839x_reg = { .enable_flood = rtl839x_enable_flood, .enable_mcast_flood = rtl839x_enable_mcast_flood, .enable_bcast_flood = rtl839x_enable_bcast_flood, + .set_static_move_action = rtl839x_set_static_move_action, .stp_get = rtl839x_stp_get, .stp_set = rtl839x_stp_set, .mac_force_mode_ctrl = rtl839x_mac_force_mode_ctrl, diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c index 3ecdda205f..703306498e 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/dsa.c @@ -188,6 +188,14 @@ static int rtl83xx_setup(struct dsa_switch *ds) } priv->r->traffic_set(priv->cpu_port, BIT_ULL(priv->cpu_port)); + /* For standalone ports, forward packets even if a static fdb + * entry for the source address exists on another port. + */ + if (priv->r->set_static_move_action) { + for (int i = 0; i <= priv->cpu_port; i++) + priv->r->set_static_move_action(i, true); + } + if (priv->family_id == RTL8380_FAMILY_ID) rtl838x_print_matrix(); else @@ -1202,6 +1210,10 @@ static int rtl83xx_port_bridge_join(struct dsa_switch *ds, int port, priv->r->traffic_set(port, v); } priv->ports[port].pm |= port_bitmap; + + if (priv->r->set_static_move_action) + priv->r->set_static_move_action(port, false); + mutex_unlock(&priv->reg_mutex); return 0; @@ -1242,6 +1254,9 @@ static void rtl83xx_port_bridge_leave(struct dsa_switch *ds, int port, } priv->ports[port].pm &= ~port_bitmap; + if (priv->r->set_static_move_action) + priv->r->set_static_move_action(port, true); + mutex_unlock(&priv->reg_mutex); } diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c index 504b29822a..606066aeea 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.c @@ -543,6 +543,15 @@ static void rtl838x_enable_bcast_flood(int port, bool enable) } +static void rtl838x_set_static_move_action(int port, bool forward) +{ + int shift = MV_ACT_PORT_SHIFT(port); + u32 val = forward ? MV_ACT_FORWARD : MV_ACT_DROP; + + sw_w32_mask(MV_ACT_MASK << shift, val << shift, + RTL838X_L2_PORT_STATIC_MV_ACT(port)); +} + static void rtl838x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) { u32 cmd = 1 << 15 | /* Execute cmd */ @@ -1717,6 +1726,7 @@ const struct rtl838x_reg rtl838x_reg = { .enable_flood = rtl838x_enable_flood, .enable_mcast_flood = rtl838x_enable_mcast_flood, .enable_bcast_flood = rtl838x_enable_bcast_flood, + .set_static_move_action = rtl838x_set_static_move_action, .stp_get = rtl838x_stp_get, .stp_set = rtl838x_stp_set, .mac_port_ctrl = rtl838x_mac_port_ctrl, diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h index a4bfc285a6..bfab576e06 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl838x.h @@ -249,6 +249,19 @@ #define RTL930X_L2_PORT_NEW_SA_FWD(p) (0x8FF4 + (((p / 10) << 2))) #define RTL931X_L2_PORT_NEW_SA_FWD(p) (0xC830 + (((p / 10) << 2))) +#define RTL838X_L2_PORT_MV_ACT(p) (0x335c + (((p >> 4) << 2))) +#define RTL839X_L2_PORT_MV_ACT(p) (0x3b80 + (((p >> 4) << 2))) + +#define RTL838X_L2_PORT_STATIC_MV_ACT(p) (0x327c + (((p >> 4) << 2))) +#define RTL839X_L2_PORT_STATIC_MV_ACT(p) (0x38dc + (((p >> 4) << 2))) + +#define MV_ACT_PORT_SHIFT(p) ((p % 16) * 2) +#define MV_ACT_MASK 0x3 +#define MV_ACT_FORWARD 0 +#define MV_ACT_DROP 1 +#define MV_ACT_TRAP2CPU 2 +#define MV_ACT_COPY2CPU 3 + #define RTL930X_ST_CTRL (0x8798) #define RTL930X_L2_PORT_SABLK_CTRL (0x905c) @@ -978,6 +991,7 @@ struct rtl838x_reg { void (*enable_flood)(int port, bool enable); void (*enable_mcast_flood)(int port, bool enable); void (*enable_bcast_flood)(int port, bool enable); + void (*set_static_move_action)(int port, bool forward); void (*stp_get)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]); void (*stp_set)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]); int (*mac_force_mode_ctrl)(int port); diff --git a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c index 06fdbd8936..fe5572a447 100644 --- a/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c +++ b/target/linux/realtek/files-5.15/drivers/net/dsa/rtl83xx/rtl839x.c @@ -590,6 +590,16 @@ static void rtl839x_enable_bcast_flood(int port, bool enable) { } + +static void rtl839x_set_static_move_action(int port, bool forward) +{ + int shift = MV_ACT_PORT_SHIFT(port); + u32 val = forward ? MV_ACT_FORWARD : MV_ACT_DROP; + + sw_w32_mask(MV_ACT_MASK << shift, val << shift, + RTL839X_L2_PORT_STATIC_MV_ACT(port)); +} + irqreturn_t rtl839x_switch_irq(int irq, void *dev_id) { struct dsa_switch *ds = dev_id; @@ -1855,6 +1865,7 @@ const struct rtl838x_reg rtl839x_reg = { .enable_flood = rtl839x_enable_flood, .enable_mcast_flood = rtl839x_enable_mcast_flood, .enable_bcast_flood = rtl839x_enable_bcast_flood, + .set_static_move_action = rtl839x_set_static_move_action, .stp_get = rtl839x_stp_get, .stp_set = rtl839x_stp_set, .mac_force_mode_ctrl = rtl839x_mac_force_mode_ctrl,