From: Rafał Miłecki Date: Sun, 21 Jun 2015 21:06:09 +0000 (+0000) Subject: b53: Allow using all 8 ports on BCM53011 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5c809ecfe7f227c77ba6c4ad3a87cf6263bee477;p=openwrt%2Fstaging%2Fkaloz.git b53: Allow using all 8 ports on BCM53011 On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000 (BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port 5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and usually 3 of them are connected to the SoC. Signed-off-by: Rafał Miłecki SVN-Revision: 46104 --- diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c index 47b5a8b03f..859d8d1bdc 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c @@ -1201,7 +1201,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .dev_name = "BCM53011", .alias = "bcm53011", .vlans = 4096, - .enabled_ports = 0x1f, + .enabled_ports = 0x1bf, .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ .vta_regs = B53_VTA_REGS, .duplex_reg = B53_DUPLEX_STAT_GE,