From: Aaro Koskinen Date: Fri, 19 Aug 2011 19:40:19 +0000 (+0300) Subject: staging: xgifb: eliminate #ifdef NewScratch X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5c167b30c1b4;p=openwrt%2Fstaging%2Fblogic.git staging: xgifb: eliminate #ifdef NewScratch NewScratch is always defined so all checks can be eliminated. Signed-off-by: Aaro Koskinen Reviewed-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/xgifb/vb_def.h b/drivers/staging/xgifb/vb_def.h index 339c071854f0..d7358d852027 100644 --- a/drivers/staging/xgifb/vb_def.h +++ b/drivers/staging/xgifb/vb_def.h @@ -3,11 +3,6 @@ #ifndef _INITDEF_ #define _INITDEF_ -#ifndef NewScratch -#define NewScratch -#endif -/* shampoo */ - #define SEQ_ADDRESS_PORT 0x0014 #define SEQ_DATA_PORT 0x0015 #define MISC_OUTPUT_REG_READ_PORT 0x001C @@ -616,16 +611,13 @@ #define Monitor1Sense 0x20 #define HiTVSense 0x40 -#ifdef NewScratch #define YPbPrSense 0x80 /* NEW SCRATCH */ -#endif #define TVSense 0xc7 #define TVOverScan 0x10 /* CR35 */ #define TVOverScanShift 4 -#ifdef NewScratch #define NTSCMode 0x00 #define PALMode 0x00 #define NTSCJMode 0x02 @@ -635,9 +627,6 @@ #define YPbPrMode525p 0x20 #define YPbPrMode750p 0x40 #define YPbPrMode1080i 0x60 -#else /* Old Scratch */ -#define ClearBufferFlag 0x20 -#endif #define LCDRGB18Bit 0x01 /* CR37 */ @@ -647,19 +636,10 @@ #define LCDSyncBit 0xe0 /* H/V polarity & sync ID */ #define LCDSyncShift 6 -#ifdef NewScratch #define ScalingLCD 0x08 -#else /* Old Scratch */ -#define ExtChipType 0x0e -#define ExtChip301 0x02 -#define ExtChipLVDS 0x04 -#define ExtChipCH7019 0x06 -#define ScalingLCD 0x10 -#endif #define EnableDualEdge 0x01 /* CR38 */ #define SetToLCDA 0x02 -#ifdef NewScratch #define SetYPbPr 0x04 #define DisableChannelA 0x08 #define DisableChannelB 0x10 @@ -667,16 +647,6 @@ #define ExtChip301 0x20 #define ExtChipLVDS 0x40 #define ExtChipCH7019 0x60 -#else /* Old Scratch */ -#define YPbPrSense 0x04 -#define SetYPbPr 0x08 -#define YPbPrMode 0x30 -#define YPbPrMode525i 0x00 -#define YPbPrMode525p 0x10 -#define YPbPrMode750p 0x20 -#define YPbPrMode1080i 0x30 -#define PALMNMode 0xc0 -#endif #define BacklightControlBit 0x01 /* CR3A */ #define Win9xforJap 0x40 @@ -694,7 +664,6 @@ #define EnableForceMDinBIOS 0x40 #define EnableForceMDinDrv 0x80 -#ifdef NewScratch /* New Scratch */ /* ---------------------- VUMA Information */ #define LCDSettingFromCMOS 0x04 /* CR3C */ #define TVSettingFromCMOS 0x08 @@ -730,52 +699,6 @@ #define StartOSDEvent 0x04 #define IgnoreHKEvent 0x08 #define IgnoreOSDEvent 0x10 -#else /* Old Scratch */ -#define OSD_SBIOS 0x02 /* SR17 */ -#define DisableLogo 0x04 -#define SelectKDOS 0x08 -#define KorWinMode 0x10 -#define KorMode3Bit 0x0020 -#define PSCCtrlBit 0x40 -#define NPSCCtrlBitShift 6 -#define BlueScreenBit 0x80 - -#define HKEvent 0x0f /* CR79 */ -#define HK_ModeSwitch 0x01 -#define HK_Expanding 0x02 -#define HK_OverScan 0x03 -#define HK_Brightness 0x04 -#define HK_Contrast 0x05 -#define HK_Mute 0x06 -#define HK_Volume 0x07 -#define ActivePAL 0x0020 -#define ActivePALShift 5 -#define ActiveNonExpanding 0x40 -#define ActiveNonExpandingShift 6 -#define ActiveOverScan 0x80 -#define ActiveOverScanShift 7 - -#define ModeSwitchStatus 0x0b /* SR15 */ -#define ActiveCRT1 0x01 -#define ActiveLCD 0x02 -#define ActiveCRT2 0x08 - -#define TVSwitchStatus 0xf0 /* SR16 */ -#define TVConfigShift 3 -#define ActiveTV 0x01 -#define ActiveYPbPr 0x04 -#define ActiveAVideo 0x10 -#define ActiveSVideo 0x0020 -#define ActiveSCART 0x40 -#define ActiveHiTV 0x80 - -#define EnableHKEvent 0x01 /* CR7A */ -#define EnableOSDEvent 0x02 -#define StartOSDEvent 0x04 -#define CMOSSupport 0x08 -#define HotKeySupport 0x10 -#define IngoreHKOSDEvent 0x20 -#endif /* //------------- Misc. Definition */ #define SelectCRT1Rate 00h