From: Álvaro Fernández Rojas Date: Fri, 27 Dec 2019 16:23:41 +0000 (+0100) Subject: brcm2708: switch to upstream cpufreq driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5c06657e42b06623390e7e2cb4d2009fdcbd2926;p=openwrt%2Fstaging%2Frmilecki.git brcm2708: switch to upstream cpufreq driver Signed-off-by: Álvaro Fernández Rojas --- diff --git a/target/linux/brcm2708/bcm2708/config-4.19 b/target/linux/brcm2708/bcm2708/config-4.19 index f657944a701..b09afa21e88 100644 --- a/target/linux/brcm2708/bcm2708/config-4.19 +++ b/target/linux/brcm2708/bcm2708/config-4.19 @@ -74,6 +74,7 @@ CONFIG_BUILD_BIN2C=y # CONFIG_CACHE_L2X0 is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_CLKSRC_MMIO=y +# CONFIG_CLK_RASPBERRYPI is not set CONFIG_CLONE_BACKWARDS=y CONFIG_CMA=y CONFIG_CMA_ALIGNMENT=8 diff --git a/target/linux/brcm2708/bcm2709/config-4.19 b/target/linux/brcm2708/bcm2709/config-4.19 index 06357d97fbc..c51fa3b835d 100644 --- a/target/linux/brcm2708/bcm2709/config-4.19 +++ b/target/linux/brcm2708/bcm2709/config-4.19 @@ -39,7 +39,7 @@ CONFIG_ARM=y CONFIG_ARM_AMBA=y CONFIG_ARM_ARCH_TIMER=y CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_BCM2835_CPUFREQ=y +# CONFIG_ARM_BCM2835_CPUFREQ is not set CONFIG_ARM_CPU_SUSPEND=y CONFIG_ARM_GIC=y CONFIG_ARM_HAS_SG_CHAIN=y @@ -48,6 +48,7 @@ CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_ARM_LPAE=y CONFIG_ARM_PATCH_IDIV=y CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_RASPBERRYPI_CPUFREQ=y # CONFIG_ARM_SCMI_PROTOCOL is not set # CONFIG_ARM_SP805_WATCHDOG is not set CONFIG_ARM_THUMB=y @@ -91,6 +92,7 @@ CONFIG_BUILD_BIN2C=y # CONFIG_CACHE_L2X0 is not set CONFIG_CLKDEV_LOOKUP=y CONFIG_CLKSRC_MMIO=y +CONFIG_CLK_RASPBERRYPI=y CONFIG_CLONE_BACKWARDS=y CONFIG_CMA=y CONFIG_CMA_ALIGNMENT=8 @@ -105,7 +107,8 @@ CONFIG_CMA_SIZE_SEL_MBYTES=y CONFIG_COMMON_CLK=y CONFIG_CONFIGFS_FS=y CONFIG_CONSOLE_TRANSLATIONS=y -# CONFIG_CPUFREQ_DT is not set +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y @@ -390,7 +393,6 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_DOMAINS_GENERIC=y CONFIG_PCI_MSI=y CONFIG_PCI_MSI_IRQ_DOMAIN=y -# CONFIG_PCI_V3_SEMI is not set CONFIG_PERF_USE_VMALLOC=y CONFIG_PGTABLE_LEVELS=3 CONFIG_PHYLIB=y @@ -403,6 +405,7 @@ CONFIG_PM_CLK=y CONFIG_PM_GENERIC_DOMAINS=y CONFIG_PM_GENERIC_DOMAINS_OF=y CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_OPP=y CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y CONFIG_POWER_SUPPLY=y diff --git a/target/linux/brcm2708/bcm2710/config-4.19 b/target/linux/brcm2708/bcm2710/config-4.19 index 6a33308f357..22698986a89 100644 --- a/target/linux/brcm2708/bcm2710/config-4.19 +++ b/target/linux/brcm2708/bcm2710/config-4.19 @@ -102,13 +102,14 @@ CONFIG_ARM_AMBA=y CONFIG_ARM_ARCH_TIMER=y CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y -CONFIG_ARM_BCM2835_CPUFREQ=y +# CONFIG_ARM_BCM2835_CPUFREQ is not set CONFIG_ARM_GIC=y CONFIG_ARM_GIC_V2M=y CONFIG_ARM_GIC_V3=y CONFIG_ARM_GIC_V3_ITS=y CONFIG_ARM_GIC_V3_ITS_PCI=y CONFIG_ARM_PSCI_FW=y +CONFIG_ARM_RASPBERRYPI_CPUFREQ=y # CONFIG_ARM_SCMI_PROTOCOL is not set # CONFIG_ARM_SP805_WATCHDOG is not set CONFIG_ARM_TIMER_SP804=y @@ -144,6 +145,7 @@ CONFIG_CAVIUM_ERRATUM_23154=y CONFIG_CAVIUM_ERRATUM_27456=y CONFIG_CLKDEV_LOOKUP=y CONFIG_CLKSRC_MMIO=y +CONFIG_CLK_RASPBERRYPI=y CONFIG_CLONE_BACKWARDS=y CONFIG_CMA=y CONFIG_CMA_ALIGNMENT=8 @@ -159,7 +161,8 @@ CONFIG_COMMON_CLK=y CONFIG_COMMON_CLK_XGENE=y CONFIG_CONFIGFS_FS=y CONFIG_CONSOLE_TRANSLATIONS=y -# CONFIG_CPUFREQ_DT is not set +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y @@ -249,6 +252,7 @@ CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y CONFIG_GENERIC_CSUM=y CONFIG_GENERIC_EARLY_IOREMAP=y CONFIG_GENERIC_IDLE_POLL_SETUP=y @@ -453,6 +457,7 @@ CONFIG_PM_CLK=y CONFIG_PM_GENERIC_DOMAINS=y CONFIG_PM_GENERIC_DOMAINS_OF=y CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_OPP=y CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y CONFIG_POWER_RESET=y