From: Hauke Mehrtens Date: Fri, 13 Jan 2017 21:35:45 +0000 (+0100) Subject: kernel: update 4.4 kernel to 4.4.42 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5b089e45a649b936d5ce71930adef4fdea8a7875;p=openwrt%2Fstaging%2Fdangole.git kernel: update 4.4 kernel to 4.4.42 Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens --- diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 857f53a744..efd58e1462 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -3,10 +3,10 @@ LINUX_RELEASE?=1 LINUX_VERSION-3.18 = .43 -LINUX_VERSION-4.4 = .40 +LINUX_VERSION-4.4 = .42 LINUX_KERNEL_HASH-3.18.43 = 1236e8123a6ce537d5029232560966feed054ae31776fe8481dd7d18cdd5492c -LINUX_KERNEL_HASH-4.4.40 = c4bc5ed6e73ed7393cc1b3714b822664224ab866db114eed663de1315718a4e1 +LINUX_KERNEL_HASH-4.4.42 = 324747568e92f203e3ee5ec8b291a868f58b870f1ad214fa64aa3507ed42e878 ifdef KERNEL_PATCHVER LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER))) diff --git a/package/kernel/mac80211/patches/090-remove-cred.patch b/package/kernel/mac80211/patches/090-remove-cred.patch new file mode 100644 index 0000000000..3adb2afb86 --- /dev/null +++ b/package/kernel/mac80211/patches/090-remove-cred.patch @@ -0,0 +1,15 @@ +This is only needed for kernel < 2.6.29 and conflicts with kernel 4.4.42 + +--- a/backport-include/linux/cred.h ++++ /dev/null +@@ -1,10 +0,0 @@ +-#ifndef __BACKPORT_LINUX_CRED_H +-#define __BACKPORT_LINUX_CRED_H +-#include_next +-#include +- +-#ifndef current_user_ns +-#define current_user_ns() (current->nsproxy->user_ns) +-#endif +- +-#endif /* __BACKPORT_LINUX_CRED_H */ diff --git a/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch b/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch index 72e275a850..5d63ddd429 100644 --- a/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch +++ b/target/linux/apm821xx/patches-4.4/801-usb-xhci-add-firmware-loader-for-uPD720201-and-uPD72.patch @@ -44,7 +44,7 @@ Signed-off-by: Christian Lamparter #include "xhci.h" #include "xhci-trace.h" -@@ -211,6 +213,458 @@ static void xhci_pme_acpi_rtd3_enable(st +@@ -218,6 +220,458 @@ static void xhci_pme_acpi_rtd3_enable(st static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { } #endif /* CONFIG_ACPI */ @@ -503,7 +503,7 @@ Signed-off-by: Christian Lamparter /* called during probe() after chip reset completes */ static int xhci_pci_setup(struct usb_hcd *hcd) { -@@ -250,6 +704,22 @@ static int xhci_pci_probe(struct pci_dev +@@ -257,6 +711,22 @@ static int xhci_pci_probe(struct pci_dev struct hc_driver *driver; struct usb_hcd *hcd; @@ -526,7 +526,7 @@ Signed-off-by: Christian Lamparter driver = (struct hc_driver *)id->driver_data; /* Prevent runtime suspending between USB-2 and USB-3 initialization */ -@@ -307,6 +777,16 @@ static void xhci_pci_remove(struct pci_d +@@ -314,6 +784,16 @@ static void xhci_pci_remove(struct pci_d { struct xhci_hcd *xhci; diff --git a/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch index 0bdb722eb6..5395cabac9 100644 --- a/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch +++ b/target/linux/apm821xx/patches-4.4/802-usb-xhci-force-msi-renesas-xhci.patch @@ -13,7 +13,7 @@ produce a noisy warning. --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -178,7 +178,7 @@ static void xhci_pci_quirks(struct devic +@@ -185,7 +185,7 @@ static void xhci_pci_quirks(struct devic } if (pdev->vendor == PCI_VENDOR_ID_RENESAS && pdev->device == 0x0015) @@ -44,7 +44,7 @@ produce a noisy warning. /* hcd->irq is 0, we have MSI */ --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1648,6 +1648,7 @@ struct xhci_hcd { +@@ -1652,6 +1652,7 @@ struct xhci_hcd { /* support xHCI 0.96 spec USB2 software LPM */ unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ diff --git a/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch b/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch index 8c27dd13fb..41f3370008 100644 --- a/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch +++ b/target/linux/apm821xx/patches-4.4/901-hwmon-add-driver-for-Microchip-TC654-TC655-PWM-fan-c.patch @@ -26,7 +26,7 @@ Signed-off-by: Christian Lamparter --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig -@@ -1493,6 +1493,16 @@ config SENSORS_INA2XX +@@ -1484,6 +1484,16 @@ config SENSORS_INA2XX This driver can also be built as a module. If so, the module will be called ina2xx. diff --git a/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch index 9d8b7e8387..f5a7f37a49 100644 --- a/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch +++ b/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch @@ -127,11 +127,11 @@ it on BCM4708 family. /* --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1631,6 +1631,7 @@ struct xhci_hcd { - /* For controllers with a broken beyond repair streams implementation */ +@@ -1635,6 +1635,7 @@ struct xhci_hcd { #define XHCI_BROKEN_STREAMS (1 << 19) #define XHCI_PME_STUCK_QUIRK (1 << 20) -+#define XHCI_FAKE_DOORBELL (1 << 24) + #define XHCI_MISSING_CAS (1 << 24) ++#define XHCI_FAKE_DOORBELL (1 << 25) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ diff --git a/target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch index 54586c1423..69711f69e9 100644 --- a/target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch +++ b/target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch @@ -659,7 +659,7 @@ dwc_otg: Remove duplicate gadget probe/unregister function } --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c -@@ -4943,7 +4943,7 @@ static void port_event(struct usb_hub *h +@@ -4942,7 +4942,7 @@ static void port_event(struct usb_hub *h if (portchange & USB_PORT_STAT_C_OVERCURRENT) { u16 status = 0, unused; diff --git a/target/linux/brcm2708/patches-4.4/0252-clk-bcm2835-add-a-round-up-ability-to-the-clock-divi.patch b/target/linux/brcm2708/patches-4.4/0252-clk-bcm2835-add-a-round-up-ability-to-the-clock-divi.patch index b0f6777348..b9b139ce9b 100644 --- a/target/linux/brcm2708/patches-4.4/0252-clk-bcm2835-add-a-round-up-ability-to-the-clock-divi.patch +++ b/target/linux/brcm2708/patches-4.4/0252-clk-bcm2835-add-a-round-up-ability-to-the-clock-divi.patch @@ -16,7 +16,7 @@ Signed-off-by: Michael Turquette --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1164,22 +1164,24 @@ static int bcm2835_clock_is_on(struct cl +@@ -1166,22 +1166,24 @@ static int bcm2835_clock_is_on(struct cl static u32 bcm2835_clock_choose_div(struct clk_hw *hw, unsigned long rate, @@ -49,7 +49,7 @@ Signed-off-by: Michael Turquette /* clamp to min divider of 1 */ div = max_t(u32, div, 1 << CM_DIV_FRAC_BITS); -@@ -1219,7 +1221,7 @@ static long bcm2835_clock_round_rate(str +@@ -1221,7 +1223,7 @@ static long bcm2835_clock_round_rate(str unsigned long *parent_rate) { struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); @@ -58,7 +58,7 @@ Signed-off-by: Michael Turquette return bcm2835_clock_rate_from_divisor(clock, *parent_rate, div); } -@@ -1288,7 +1290,7 @@ static int bcm2835_clock_set_rate(struct +@@ -1290,7 +1292,7 @@ static int bcm2835_clock_set_rate(struct struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); struct bcm2835_cprman *cprman = clock->cprman; const struct bcm2835_clock_data *data = clock->data; diff --git a/target/linux/brcm2708/patches-4.4/0253-clk-bcm2835-Support-for-clock-parent-selection.patch b/target/linux/brcm2708/patches-4.4/0253-clk-bcm2835-Support-for-clock-parent-selection.patch index f0907c1cd4..0332be617e 100644 --- a/target/linux/brcm2708/patches-4.4/0253-clk-bcm2835-Support-for-clock-parent-selection.patch +++ b/target/linux/brcm2708/patches-4.4/0253-clk-bcm2835-Support-for-clock-parent-selection.patch @@ -24,7 +24,7 @@ Signed-off-by: Michael Turquette --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1216,16 +1216,6 @@ static long bcm2835_clock_rate_from_divi +@@ -1218,16 +1218,6 @@ static long bcm2835_clock_rate_from_divi return temp; } @@ -41,7 +41,7 @@ Signed-off-by: Michael Turquette static unsigned long bcm2835_clock_get_rate(struct clk_hw *hw, unsigned long parent_rate) { -@@ -1297,13 +1287,75 @@ static int bcm2835_clock_set_rate(struct +@@ -1299,13 +1289,75 @@ static int bcm2835_clock_set_rate(struct return 0; } @@ -118,7 +118,7 @@ Signed-off-by: Michael Turquette }; static int bcm2835_vpu_clock_is_on(struct clk_hw *hw) -@@ -1319,7 +1371,9 @@ static const struct clk_ops bcm2835_vpu_ +@@ -1321,7 +1373,9 @@ static const struct clk_ops bcm2835_vpu_ .is_prepared = bcm2835_vpu_clock_is_on, .recalc_rate = bcm2835_clock_get_rate, .set_rate = bcm2835_clock_set_rate, @@ -129,7 +129,7 @@ Signed-off-by: Michael Turquette }; static struct clk *bcm2835_register_pll(struct bcm2835_cprman *cprman, -@@ -1413,45 +1467,23 @@ static struct clk *bcm2835_register_cloc +@@ -1415,45 +1469,23 @@ static struct clk *bcm2835_register_cloc { struct bcm2835_clock *clock; struct clk_init_data init; diff --git a/target/linux/brcm2708/patches-4.4/0254-clk-bcm2835-Add-PWM-clock-support.patch b/target/linux/brcm2708/patches-4.4/0254-clk-bcm2835-Add-PWM-clock-support.patch index 428a952096..aa7bc7d1b6 100644 --- a/target/linux/brcm2708/patches-4.4/0254-clk-bcm2835-Add-PWM-clock-support.patch +++ b/target/linux/brcm2708/patches-4.4/0254-clk-bcm2835-Add-PWM-clock-support.patch @@ -33,7 +33,7 @@ Signed-off-by: Michael Turquette struct bcm2835_pll { struct clk_hw hw; struct bcm2835_cprman *cprman; -@@ -1601,6 +1611,9 @@ static int bcm2835_clk_probe(struct plat +@@ -1603,6 +1613,9 @@ static int bcm2835_clk_probe(struct plat cprman->regs + CM_PERIICTL, CM_GATE_BIT, 0, &cprman->regs_lock); diff --git a/target/linux/brcm2708/patches-4.4/0256-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch b/target/linux/brcm2708/patches-4.4/0256-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch index 737a1a9b64..80a4ba8d23 100644 --- a/target/linux/brcm2708/patches-4.4/0256-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch +++ b/target/linux/brcm2708/patches-4.4/0256-clk-bcm2835-correctly-enable-fractional-clock-suppor.patch @@ -66,7 +66,7 @@ Reviewed-by: Eric Anholt }; struct bcm2835_pll { -@@ -1196,7 +1200,7 @@ static u32 bcm2835_clock_choose_div(stru +@@ -1198,7 +1202,7 @@ static u32 bcm2835_clock_choose_div(stru GENMASK(CM_DIV_FRAC_BITS - data->frac_bits, 0) >> 1; u64 temp = (u64)parent_rate << CM_DIV_FRAC_BITS; u64 rem; @@ -75,7 +75,7 @@ Reviewed-by: Eric Anholt rem = do_div(temp, rate); div = temp; -@@ -1206,11 +1210,23 @@ static u32 bcm2835_clock_choose_div(stru +@@ -1208,11 +1212,23 @@ static u32 bcm2835_clock_choose_div(stru div += unused_frac_mask + 1; div &= ~unused_frac_mask; @@ -104,7 +104,7 @@ Reviewed-by: Eric Anholt return div; } -@@ -1304,9 +1320,26 @@ static int bcm2835_clock_set_rate(struct +@@ -1306,9 +1322,26 @@ static int bcm2835_clock_set_rate(struct struct bcm2835_cprman *cprman = clock->cprman; const struct bcm2835_clock_data *data = clock->data; u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false); diff --git a/target/linux/brcm2708/patches-4.4/0257-clk-bcm2835-clean-up-coding-style-issues.patch b/target/linux/brcm2708/patches-4.4/0257-clk-bcm2835-clean-up-coding-style-issues.patch index 94f75ed567..5a4ae3c653 100644 --- a/target/linux/brcm2708/patches-4.4/0257-clk-bcm2835-clean-up-coding-style-issues.patch +++ b/target/linux/brcm2708/patches-4.4/0257-clk-bcm2835-clean-up-coding-style-issues.patch @@ -33,7 +33,7 @@ Signed-off-by: Eric Anholt const char *osc_name; struct clk_onecell_data onecell; -@@ -1344,7 +1341,7 @@ static int bcm2835_clock_set_rate(struct +@@ -1346,7 +1343,7 @@ static int bcm2835_clock_set_rate(struct } static int bcm2835_clock_determine_rate(struct clk_hw *hw, @@ -42,7 +42,7 @@ Signed-off-by: Eric Anholt { struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); struct clk_hw *parent, *best_parent = NULL; -@@ -1402,7 +1399,6 @@ static u8 bcm2835_clock_get_parent(struc +@@ -1404,7 +1401,6 @@ static u8 bcm2835_clock_get_parent(struc return (src & CM_SRC_MASK) >> CM_SRC_SHIFT; } diff --git a/target/linux/brcm2708/patches-4.4/0258-clk-bcm2835-expose-raw-clock-registers-via-debugfs.patch b/target/linux/brcm2708/patches-4.4/0258-clk-bcm2835-expose-raw-clock-registers-via-debugfs.patch index b61bd04f9a..98f08c2905 100644 --- a/target/linux/brcm2708/patches-4.4/0258-clk-bcm2835-expose-raw-clock-registers-via-debugfs.patch +++ b/target/linux/brcm2708/patches-4.4/0258-clk-bcm2835-expose-raw-clock-registers-via-debugfs.patch @@ -103,7 +103,7 @@ Acked-by: Eric Anholt }; struct bcm2835_pll_divider { -@@ -1151,6 +1204,26 @@ static int bcm2835_pll_divider_set_rate( +@@ -1153,6 +1206,26 @@ static int bcm2835_pll_divider_set_rate( return 0; } @@ -130,7 +130,7 @@ Acked-by: Eric Anholt static const struct clk_ops bcm2835_pll_divider_clk_ops = { .is_prepared = bcm2835_pll_divider_is_on, .prepare = bcm2835_pll_divider_on, -@@ -1158,6 +1231,7 @@ static const struct clk_ops bcm2835_pll_ +@@ -1160,6 +1233,7 @@ static const struct clk_ops bcm2835_pll_ .recalc_rate = bcm2835_pll_divider_get_rate, .set_rate = bcm2835_pll_divider_set_rate, .round_rate = bcm2835_pll_divider_round_rate, @@ -138,7 +138,7 @@ Acked-by: Eric Anholt }; /* -@@ -1399,6 +1473,31 @@ static u8 bcm2835_clock_get_parent(struc +@@ -1401,6 +1475,31 @@ static u8 bcm2835_clock_get_parent(struc return (src & CM_SRC_MASK) >> CM_SRC_SHIFT; } @@ -170,7 +170,7 @@ Acked-by: Eric Anholt static const struct clk_ops bcm2835_clock_clk_ops = { .is_prepared = bcm2835_clock_is_on, .prepare = bcm2835_clock_on, -@@ -1408,6 +1507,7 @@ static const struct clk_ops bcm2835_cloc +@@ -1410,6 +1509,7 @@ static const struct clk_ops bcm2835_cloc .determine_rate = bcm2835_clock_determine_rate, .set_parent = bcm2835_clock_set_parent, .get_parent = bcm2835_clock_get_parent, @@ -178,7 +178,7 @@ Acked-by: Eric Anholt }; static int bcm2835_vpu_clock_is_on(struct clk_hw *hw) -@@ -1426,6 +1526,7 @@ static const struct clk_ops bcm2835_vpu_ +@@ -1428,6 +1528,7 @@ static const struct clk_ops bcm2835_vpu_ .determine_rate = bcm2835_clock_determine_rate, .set_parent = bcm2835_clock_set_parent, .get_parent = bcm2835_clock_get_parent, diff --git a/target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-remove-use-of-BCM2835_CLOCK_COUNT-in-dri.patch b/target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-remove-use-of-BCM2835_CLOCK_COUNT-in-dri.patch index a8b36ae536..58a4c5db36 100644 --- a/target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-remove-use-of-BCM2835_CLOCK_COUNT-in-dri.patch +++ b/target/linux/brcm2708/patches-4.4/0259-clk-bcm2835-remove-use-of-BCM2835_CLOCK_COUNT-in-dri.patch @@ -56,7 +56,7 @@ Reviewed-by: Eric Anholt struct bcm2835_pll { struct clk_hw hw; struct bcm2835_cprman *cprman; -@@ -1658,14 +1677,81 @@ static struct clk *bcm2835_register_cloc +@@ -1660,14 +1679,81 @@ static struct clk *bcm2835_register_cloc return devm_clk_register(cprman->dev, &clock->hw); } @@ -139,7 +139,7 @@ Reviewed-by: Eric Anholt if (!cprman) return -ENOMEM; -@@ -1682,80 +1768,15 @@ static int bcm2835_clk_probe(struct plat +@@ -1684,80 +1770,15 @@ static int bcm2835_clk_probe(struct plat platform_set_drvdata(pdev, cprman); diff --git a/target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-reorganize-bcm2835_clock_array-assignmen.patch b/target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-reorganize-bcm2835_clock_array-assignmen.patch index 712e14f699..0f1ad866ce 100644 --- a/target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-reorganize-bcm2835_clock_array-assignmen.patch +++ b/target/linux/brcm2708/patches-4.4/0260-clk-bcm2835-reorganize-bcm2835_clock_array-assignmen.patch @@ -473,7 +473,7 @@ Reviewed-by: Eric Anholt struct bcm2835_pll { struct clk_hw hw; struct bcm2835_cprman *cprman; -@@ -1594,7 +1177,7 @@ bcm2835_register_pll_divider(struct bcm2 +@@ -1596,7 +1179,7 @@ bcm2835_register_pll_divider(struct bcm2 memset(&init, 0, sizeof(init)); @@ -482,7 +482,7 @@ Reviewed-by: Eric Anholt init.num_parents = 1; init.name = divider_name; init.ops = &bcm2835_pll_divider_clk_ops; -@@ -1693,50 +1276,401 @@ struct bcm2835_clk_desc { +@@ -1695,50 +1278,401 @@ struct bcm2835_clk_desc { const void *data; }; diff --git a/target/linux/brcm2708/patches-4.4/0261-clk-bcm2835-enable-management-of-PCM-clock.patch b/target/linux/brcm2708/patches-4.4/0261-clk-bcm2835-enable-management-of-PCM-clock.patch index edf85d6dae..01dd778826 100644 --- a/target/linux/brcm2708/patches-4.4/0261-clk-bcm2835-enable-management-of-PCM-clock.patch +++ b/target/linux/brcm2708/patches-4.4/0261-clk-bcm2835-enable-management-of-PCM-clock.patch @@ -17,7 +17,7 @@ Reviewed-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1638,6 +1638,13 @@ static const struct bcm2835_clk_desc clk +@@ -1640,6 +1640,13 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_HSMDIV, .int_bits = 4, .frac_bits = 8), diff --git a/target/linux/brcm2708/patches-4.4/0262-clk-bcm2835-add-missing-PLL-clock-dividers.patch b/target/linux/brcm2708/patches-4.4/0262-clk-bcm2835-add-missing-PLL-clock-dividers.patch index 58fb0e2474..33d793742d 100644 --- a/target/linux/brcm2708/patches-4.4/0262-clk-bcm2835-add-missing-PLL-clock-dividers.patch +++ b/target/linux/brcm2708/patches-4.4/0262-clk-bcm2835-add-missing-PLL-clock-dividers.patch @@ -14,7 +14,7 @@ Reviewed-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1387,6 +1387,22 @@ static const struct bcm2835_clk_desc clk +@@ -1389,6 +1389,22 @@ static const struct bcm2835_clk_desc clk .load_mask = CM_PLLA_LOADPER, .hold_mask = CM_PLLA_HOLDPER, .fixed_divider = 1), @@ -37,7 +37,7 @@ Reviewed-by: Eric Anholt /* PLLB is used for the ARM's clock. */ [BCM2835_PLLB] = REGISTER_PLL( -@@ -1501,6 +1517,22 @@ static const struct bcm2835_clk_desc clk +@@ -1503,6 +1519,22 @@ static const struct bcm2835_clk_desc clk .load_mask = CM_PLLD_LOADPER, .hold_mask = CM_PLLD_HOLDPER, .fixed_divider = 1), diff --git a/target/linux/brcm2708/patches-4.4/0263-clk-bcm2835-add-missing-osc-and-per-clocks.patch b/target/linux/brcm2708/patches-4.4/0263-clk-bcm2835-add-missing-osc-and-per-clocks.patch index 7efe7e0c9a..9ecb0e2bd2 100644 --- a/target/linux/brcm2708/patches-4.4/0263-clk-bcm2835-add-missing-osc-and-per-clocks.patch +++ b/target/linux/brcm2708/patches-4.4/0263-clk-bcm2835-add-missing-osc-and-per-clocks.patch @@ -26,7 +26,7 @@ Reviewed-by: Eric Anholt #define CM_EMMCCTL 0x1c0 #define CM_EMMCDIV 0x1c4 -@@ -1610,6 +1612,12 @@ static const struct bcm2835_clk_desc clk +@@ -1612,6 +1614,12 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_TSENSDIV, .int_bits = 5, .frac_bits = 0), @@ -39,7 +39,7 @@ Reviewed-by: Eric Anholt /* clocks with vpu parent mux */ [BCM2835_CLOCK_H264] = REGISTER_VPU_CLK( -@@ -1624,6 +1632,7 @@ static const struct bcm2835_clk_desc clk +@@ -1626,6 +1634,7 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_ISPDIV, .int_bits = 4, .frac_bits = 8), @@ -47,7 +47,7 @@ Reviewed-by: Eric Anholt /* * Secondary SDRAM clock. Used for low-voltage modes when the PLL * in the SDRAM controller can't be used. -@@ -1655,6 +1664,36 @@ static const struct bcm2835_clk_desc clk +@@ -1657,6 +1666,36 @@ static const struct bcm2835_clk_desc clk .is_vpu_clock = true), /* clocks with per parent mux */ @@ -84,7 +84,7 @@ Reviewed-by: Eric Anholt /* Arasan EMMC clock */ [BCM2835_CLOCK_EMMC] = REGISTER_PER_CLK( -@@ -1663,6 +1702,29 @@ static const struct bcm2835_clk_desc clk +@@ -1665,6 +1704,29 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_EMMCDIV, .int_bits = 4, .frac_bits = 8), @@ -114,7 +114,7 @@ Reviewed-by: Eric Anholt /* HDMI state machine */ [BCM2835_CLOCK_HSM] = REGISTER_PER_CLK( .name = "hsm", -@@ -1684,12 +1746,26 @@ static const struct bcm2835_clk_desc clk +@@ -1686,12 +1748,26 @@ static const struct bcm2835_clk_desc clk .int_bits = 12, .frac_bits = 12, .is_mash_clock = true), @@ -141,7 +141,7 @@ Reviewed-by: Eric Anholt /* TV encoder clock. Only operating frequency is 108Mhz. */ [BCM2835_CLOCK_VEC] = REGISTER_PER_CLK( .name = "vec", -@@ -1698,6 +1774,20 @@ static const struct bcm2835_clk_desc clk +@@ -1700,6 +1776,20 @@ static const struct bcm2835_clk_desc clk .int_bits = 4, .frac_bits = 0), diff --git a/target/linux/brcm2708/patches-4.4/0345-clk-bcm2835-Mark-the-VPU-clock-as-critical.patch b/target/linux/brcm2708/patches-4.4/0345-clk-bcm2835-Mark-the-VPU-clock-as-critical.patch index 952ff01678..dcd6db28fa 100644 --- a/target/linux/brcm2708/patches-4.4/0345-clk-bcm2835-Mark-the-VPU-clock-as-critical.patch +++ b/target/linux/brcm2708/patches-4.4/0345-clk-bcm2835-Mark-the-VPU-clock-as-critical.patch @@ -27,7 +27,7 @@ Signed-off-by: Eric Anholt bool is_vpu_clock; bool is_mash_clock; }; -@@ -1242,7 +1244,7 @@ static struct clk *bcm2835_register_cloc +@@ -1244,7 +1246,7 @@ static struct clk *bcm2835_register_cloc init.parent_names = parents; init.num_parents = data->num_mux_parents; init.name = data->name; @@ -36,7 +36,7 @@ Signed-off-by: Eric Anholt if (data->is_vpu_clock) { init.ops = &bcm2835_vpu_clock_clk_ops; -@@ -1661,6 +1663,7 @@ static const struct bcm2835_clk_desc clk +@@ -1663,6 +1665,7 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_VPUDIV, .int_bits = 12, .frac_bits = 8, diff --git a/target/linux/brcm2708/patches-4.4/0346-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch b/target/linux/brcm2708/patches-4.4/0346-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch index 8c56452e82..be63d82f6a 100644 --- a/target/linux/brcm2708/patches-4.4/0346-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch +++ b/target/linux/brcm2708/patches-4.4/0346-clk-bcm2835-Mark-GPIO-clocks-enabled-at-boot-as-crit.patch @@ -19,7 +19,7 @@ Signed-off-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1246,6 +1246,15 @@ static struct clk *bcm2835_register_cloc +@@ -1248,6 +1248,15 @@ static struct clk *bcm2835_register_cloc init.name = data->name; init.flags = data->flags | CLK_IGNORE_UNUSED; @@ -35,7 +35,7 @@ Signed-off-by: Eric Anholt if (data->is_vpu_clock) { init.ops = &bcm2835_vpu_clock_clk_ops; } else { -@@ -1720,13 +1729,15 @@ static const struct bcm2835_clk_desc clk +@@ -1722,13 +1731,15 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_GP1DIV, .int_bits = 12, .frac_bits = 12, diff --git a/target/linux/brcm2708/patches-4.4/0347-clk-bcm2835-Skip-PLLC-clocks-when-deciding-on-a-new-.patch b/target/linux/brcm2708/patches-4.4/0347-clk-bcm2835-Skip-PLLC-clocks-when-deciding-on-a-new-.patch index d2eefe81ed..8b62debd15 100644 --- a/target/linux/brcm2708/patches-4.4/0347-clk-bcm2835-Skip-PLLC-clocks-when-deciding-on-a-new-.patch +++ b/target/linux/brcm2708/patches-4.4/0347-clk-bcm2835-Skip-PLLC-clocks-when-deciding-on-a-new-.patch @@ -22,7 +22,7 @@ Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1020,16 +1020,28 @@ static int bcm2835_clock_set_rate(struct +@@ -1022,16 +1022,28 @@ static int bcm2835_clock_set_rate(struct return 0; } @@ -51,7 +51,7 @@ Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain /* * Select parent clock that results in the closest but lower rate */ -@@ -1037,6 +1049,17 @@ static int bcm2835_clock_determine_rate( +@@ -1039,6 +1051,17 @@ static int bcm2835_clock_determine_rate( parent = clk_hw_get_parent_by_index(hw, i); if (!parent) continue; diff --git a/target/linux/brcm2708/patches-4.4/0431-clk-bcm2835-Mark-the-CM-SDRAM-clock-s-parent-as-crit.patch b/target/linux/brcm2708/patches-4.4/0431-clk-bcm2835-Mark-the-CM-SDRAM-clock-s-parent-as-crit.patch index 60ad59dec8..77f7aafe56 100644 --- a/target/linux/brcm2708/patches-4.4/0431-clk-bcm2835-Mark-the-CM-SDRAM-clock-s-parent-as-crit.patch +++ b/target/linux/brcm2708/patches-4.4/0431-clk-bcm2835-Mark-the-CM-SDRAM-clock-s-parent-as-crit.patch @@ -26,7 +26,7 @@ Signed-off-by: Eric Anholt #include #include #include -@@ -1839,6 +1840,25 @@ static const struct bcm2835_clk_desc clk +@@ -1841,6 +1842,25 @@ static const struct bcm2835_clk_desc clk .ctl_reg = CM_PERIICTL), }; @@ -52,7 +52,7 @@ Signed-off-by: Eric Anholt static int bcm2835_clk_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; -@@ -1848,6 +1868,7 @@ static int bcm2835_clk_probe(struct plat +@@ -1850,6 +1870,7 @@ static int bcm2835_clk_probe(struct plat const struct bcm2835_clk_desc *desc; const size_t asize = ARRAY_SIZE(clk_desc_array); size_t i; @@ -60,7 +60,7 @@ Signed-off-by: Eric Anholt cprman = devm_kzalloc(dev, sizeof(*cprman) + asize * sizeof(*clks), -@@ -1878,6 +1899,10 @@ static int bcm2835_clk_probe(struct plat +@@ -1880,6 +1901,10 @@ static int bcm2835_clk_probe(struct plat clks[i] = desc->clk_register(cprman, desc->data); } diff --git a/target/linux/brcm2708/patches-4.4/0432-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-divi.patch b/target/linux/brcm2708/patches-4.4/0432-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-divi.patch index c5233b5ed1..5d8d34433c 100644 --- a/target/linux/brcm2708/patches-4.4/0432-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-divi.patch +++ b/target/linux/brcm2708/patches-4.4/0432-clk-bcm2835-Don-t-rate-change-PLLs-on-behalf-of-divi.patch @@ -16,7 +16,7 @@ Signed-off-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -1209,7 +1209,7 @@ bcm2835_register_pll_divider(struct bcm2 +@@ -1211,7 +1211,7 @@ bcm2835_register_pll_divider(struct bcm2 init.num_parents = 1; init.name = divider_name; init.ops = &bcm2835_pll_divider_clk_ops; diff --git a/target/linux/brcm2708/patches-4.4/0433-clk-bcm2835-Do-appropriate-name-lookups-for-DSI1-s-p.patch b/target/linux/brcm2708/patches-4.4/0433-clk-bcm2835-Do-appropriate-name-lookups-for-DSI1-s-p.patch index e0b3ba2949..e4b5b4526d 100644 --- a/target/linux/brcm2708/patches-4.4/0433-clk-bcm2835-Do-appropriate-name-lookups-for-DSI1-s-p.patch +++ b/target/linux/brcm2708/patches-4.4/0433-clk-bcm2835-Do-appropriate-name-lookups-for-DSI1-s-p.patch @@ -64,7 +64,7 @@ Signed-off-by: Eric Anholt struct clk_onecell_data onecell; struct clk *clks[]; -@@ -1168,7 +1186,7 @@ static struct clk *bcm2835_register_pll( +@@ -1170,7 +1188,7 @@ static struct clk *bcm2835_register_pll( memset(&init, 0, sizeof(init)); /* All of the PLLs derive from the external oscillator. */ @@ -73,7 +73,7 @@ Signed-off-by: Eric Anholt init.num_parents = 1; init.name = data->name; init.ops = &bcm2835_pll_clk_ops; -@@ -1251,17 +1269,21 @@ static struct clk *bcm2835_register_cloc +@@ -1253,17 +1271,21 @@ static struct clk *bcm2835_register_cloc struct bcm2835_clock *clock; struct clk_init_data init; const char *parents[1 << CM_SRC_BITS]; @@ -102,7 +102,7 @@ Signed-off-by: Eric Anholt } memset(&init, 0, sizeof(init)); -@@ -1883,8 +1905,18 @@ static int bcm2835_clk_probe(struct plat +@@ -1885,8 +1907,18 @@ static int bcm2835_clk_probe(struct plat if (IS_ERR(cprman->regs)) return PTR_ERR(cprman->regs); diff --git a/target/linux/brcm2708/patches-4.4/0434-clk-bcm2835-Add-an-enum-for-the-DSI1-pixel-clock.patch b/target/linux/brcm2708/patches-4.4/0434-clk-bcm2835-Add-an-enum-for-the-DSI1-pixel-clock.patch index 7d6e9f7c9f..3bcb1dab9e 100644 --- a/target/linux/brcm2708/patches-4.4/0434-clk-bcm2835-Add-an-enum-for-the-DSI1-pixel-clock.patch +++ b/target/linux/brcm2708/patches-4.4/0434-clk-bcm2835-Add-an-enum-for-the-DSI1-pixel-clock.patch @@ -11,7 +11,7 @@ Signed-off-by: Eric Anholt --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -934,6 +934,9 @@ static long bcm2835_clock_rate_from_divi +@@ -936,6 +936,9 @@ static long bcm2835_clock_rate_from_divi const struct bcm2835_clock_data *data = clock->data; u64 temp; @@ -21,7 +21,7 @@ Signed-off-by: Eric Anholt /* * The divisor is a 12.12 fixed point field, but only some of * the bits are populated in any given clock. -@@ -957,7 +960,12 @@ static unsigned long bcm2835_clock_get_r +@@ -959,7 +962,12 @@ static unsigned long bcm2835_clock_get_r struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); struct bcm2835_cprman *cprman = clock->cprman; const struct bcm2835_clock_data *data = clock->data; @@ -35,7 +35,7 @@ Signed-off-by: Eric Anholt return bcm2835_clock_rate_from_divisor(clock, parent_rate, div); } -@@ -1403,6 +1411,28 @@ static const char *const bcm2835_clock_v +@@ -1405,6 +1413,28 @@ static const char *const bcm2835_clock_v __VA_ARGS__) /* @@ -64,7 +64,7 @@ Signed-off-by: Eric Anholt * the real definition of all the pll, pll_dividers and clocks * these make use of the above REGISTER_* macros */ -@@ -1847,7 +1877,12 @@ static const struct bcm2835_clk_desc clk +@@ -1849,7 +1879,12 @@ static const struct bcm2835_clk_desc clk .div_reg = CM_DSI1EDIV, .int_bits = 4, .frac_bits = 8), diff --git a/target/linux/brcm47xx/patches-4.4/400-mtd-bcm47xxpart-get-nvram.patch b/target/linux/brcm47xx/patches-4.4/400-mtd-bcm47xxpart-get-nvram.patch index 9ffc4ca31c..64184c079d 100644 --- a/target/linux/brcm47xx/patches-4.4/400-mtd-bcm47xxpart-get-nvram.patch +++ b/target/linux/brcm47xx/patches-4.4/400-mtd-bcm47xxpart-get-nvram.patch @@ -1,14 +1,14 @@ --- a/drivers/mtd/bcm47xxpart.c +++ b/drivers/mtd/bcm47xxpart.c -@@ -127,6 +127,7 @@ static int bcm47xxpart_parse(struct mtd_ - int last_trx_part = -1; +@@ -217,6 +217,7 @@ static int bcm47xxpart_parse(struct mtd_ + int trx_num = 0; /* Number of found TRX partitions */ int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, }; int err; + bool found_nvram = false; /* * Some really old flashes (like AT45DB*) had smaller erasesize-s, but -@@ -332,12 +333,23 @@ static int bcm47xxpart_parse(struct mtd_ +@@ -384,12 +385,23 @@ static int bcm47xxpart_parse(struct mtd_ if (buf[0] == NVRAM_HEADER) { bcm47xxpart_add_part(&parts[curr_part++], "nvram", master->size - blocksize, 0); diff --git a/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch b/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch index d522bb7e8d..b6f583053f 100644 --- a/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch +++ b/target/linux/ipq806x/patches-4.4/096-04-usb-dwc3-DWC_usb31-controller-check.patch @@ -13,7 +13,7 @@ Signed-off-by: Felipe Balbi --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h -@@ -1021,6 +1021,12 @@ struct dwc3_gadget_ep_cmd_params { +@@ -1019,6 +1019,12 @@ struct dwc3_gadget_ep_cmd_params { void dwc3_set_mode(struct dwc3 *dwc, u32 mode); int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc); diff --git a/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch b/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch index 0030446eab..264893d53d 100644 --- a/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch +++ b/target/linux/ipq806x/patches-4.4/096-05-usb-dwc3-Update-register-fields-for-SuperSpeedPlus.patch @@ -14,7 +14,7 @@ Signed-off-by: Felipe Balbi --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h -@@ -222,7 +222,8 @@ +@@ -220,7 +220,8 @@ /* Global HWPARAMS3 Register */ #define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3) #define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0 @@ -24,7 +24,7 @@ Signed-off-by: Felipe Balbi #define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2) #define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0 #define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1 -@@ -248,6 +249,7 @@ +@@ -246,6 +247,7 @@ #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) #define DWC3_DCFG_SPEED_MASK (7 << 0) @@ -32,7 +32,7 @@ Signed-off-by: Felipe Balbi #define DWC3_DCFG_SUPERSPEED (4 << 0) #define DWC3_DCFG_HIGHSPEED (0 << 0) #define DWC3_DCFG_FULLSPEED2 (1 << 0) -@@ -338,6 +340,7 @@ +@@ -336,6 +338,7 @@ #define DWC3_DSTS_CONNECTSPD (7 << 0) diff --git a/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch b/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch index a6510d8f56..132d131dfb 100644 --- a/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch +++ b/target/linux/ipq806x/patches-4.4/096-07-usb-dwc3-drop-FIFO-resizing-logic.patch @@ -82,7 +82,7 @@ Signed-off-by: Felipe Balbi --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h -@@ -707,9 +707,7 @@ struct dwc3_scratchpad_array { +@@ -705,9 +705,7 @@ struct dwc3_scratchpad_array { * 0 - utmi_sleep_n * 1 - utmi_l1_suspend_n * @is_fpga: true when we are using the FPGA board @@ -92,7 +92,7 @@ Signed-off-by: Felipe Balbi * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround * @start_config_issued: true when StartConfig command has been issued * @three_stage_setup: set if we perform a three phase setup -@@ -852,9 +850,7 @@ struct dwc3 { +@@ -850,9 +848,7 @@ struct dwc3 { unsigned has_lpm_erratum:1; unsigned is_utmi_l1_suspend:1; unsigned is_fpga:1; @@ -102,7 +102,7 @@ Signed-off-by: Felipe Balbi unsigned setup_packet_pending:1; unsigned three_stage_setup:1; unsigned usb3_lpm_capable:1; -@@ -1022,7 +1018,6 @@ struct dwc3_gadget_ep_cmd_params { +@@ -1020,7 +1016,6 @@ struct dwc3_gadget_ep_cmd_params { /* prototypes */ void dwc3_set_mode(struct dwc3 *dwc, u32 mode); @@ -112,7 +112,7 @@ Signed-off-by: Felipe Balbi static inline bool dwc3_is_usb31(struct dwc3 *dwc) --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c -@@ -583,9 +583,6 @@ static int dwc3_ep0_set_config(struct dw +@@ -587,9 +587,6 @@ static int dwc3_ep0_set_config(struct dw reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= (DWC3_DCTL_ACCEPTU1ENA | DWC3_DCTL_ACCEPTU2ENA); dwc3_writel(dwc->regs, DWC3_DCTL, reg); @@ -122,7 +122,7 @@ Signed-off-by: Felipe Balbi } break; -@@ -1020,12 +1017,6 @@ static int dwc3_ep0_start_control_status +@@ -1028,12 +1025,6 @@ static int dwc3_ep0_start_control_status static void __dwc3_ep0_do_control_status(struct dwc3 *dwc, struct dwc3_ep *dep) { diff --git a/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch b/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch index 32ff364e5a..5067548019 100644 --- a/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch +++ b/target/linux/ipq806x/patches-4.4/096-08-usb-dwc3-remove-num_event_buffers.patch @@ -143,7 +143,7 @@ Signed-off-by: Felipe Balbi static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h -@@ -665,7 +665,6 @@ struct dwc3_scratchpad_array { +@@ -663,7 +663,6 @@ struct dwc3_scratchpad_array { * @regs: base address for our registers * @regs_size: address space size * @nr_scratch: number of scratch buffers @@ -151,7 +151,7 @@ Signed-off-by: Felipe Balbi * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) * @revision: revision register contents -@@ -775,7 +774,6 @@ struct dwc3 { +@@ -773,7 +772,6 @@ struct dwc3 { u32 gctl; u32 nr_scratch; diff --git a/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch b/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch index 34f42110a9..827b621c98 100644 --- a/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch +++ b/target/linux/ipq806x/patches-4.4/096-09-usb-dwc3-drop-ev_buffs-array.patch @@ -65,7 +65,7 @@ Signed-off-by: Felipe Balbi --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h -@@ -750,7 +750,7 @@ struct dwc3 { +@@ -748,7 +748,7 @@ struct dwc3 { struct platform_device *xhci; struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM]; diff --git a/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch b/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch index 4d907988fb..b140787ac7 100644 --- a/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch +++ b/target/linux/ipq806x/patches-4.4/111-PCI-qcom-Add-Qualcomm-PCIe-controller-driver.patch @@ -34,7 +34,7 @@ MAINTAINERS | 7 + --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -8253,6 +8253,13 @@ S: Maintained +@@ -8248,6 +8248,13 @@ S: Maintained F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt F: drivers/pci/host/pcie-hisi.c diff --git a/target/linux/lantiq/patches-4.4/0302-xrx200-add-sensors-driver.patch b/target/linux/lantiq/patches-4.4/0302-xrx200-add-sensors-driver.patch index 33ff535881..7256208061 100644 --- a/target/linux/lantiq/patches-4.4/0302-xrx200-add-sensors-driver.patch +++ b/target/linux/lantiq/patches-4.4/0302-xrx200-add-sensors-driver.patch @@ -10,7 +10,7 @@ obj-$(CONFIG_SENSORS_MAX1619) += max1619.o --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig -@@ -762,6 +762,14 @@ config SENSORS_LTC4261 +@@ -753,6 +753,14 @@ config SENSORS_LTC4261 This driver can also be built as a module. If so, the module will be called ltc4261. diff --git a/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch b/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch index 055ea03835..8704a79c0b 100644 --- a/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch +++ b/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch @@ -1428,7 +1428,7 @@ Reviewed-by: Daniel Thompson /* * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA -@@ -3088,17 +3089,22 @@ static u32 xhci_td_remainder(struct xhci +@@ -3121,17 +3122,22 @@ static u32 xhci_td_remainder(struct xhci { u32 maxp, total_packet_count; @@ -1455,7 +1455,7 @@ Reviewed-by: Daniel Thompson /* Queueing functions don't count the current TRB into transferred */ return (total_packet_count - ((transferred + trb_buff_len) / maxp)); } -@@ -3486,7 +3492,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * +@@ -3519,7 +3525,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * field |= 0x1; /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */ @@ -1515,11 +1515,11 @@ Reviewed-by: Daniel Thompson --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1631,6 +1631,7 @@ struct xhci_hcd { +@@ -1634,6 +1634,7 @@ struct xhci_hcd { /* For controllers with a broken beyond repair streams implementation */ #define XHCI_BROKEN_STREAMS (1 << 19) #define XHCI_PME_STUCK_QUIRK (1 << 20) +#define XHCI_MTK_HOST (1 << 21) + #define XHCI_MISSING_CAS (1 << 24) unsigned int num_active_eps; unsigned int limit_active_eps; - /* There are two roothubs to keep track of bus suspend info for */ diff --git a/target/linux/mediatek/patches-4.4/0051-net-next-mediatek-add-an-entry-to-MAINTAINERS.patch b/target/linux/mediatek/patches-4.4/0051-net-next-mediatek-add-an-entry-to-MAINTAINERS.patch index 0fc9b373e5..10690b25ef 100644 --- a/target/linux/mediatek/patches-4.4/0051-net-next-mediatek-add-an-entry-to-MAINTAINERS.patch +++ b/target/linux/mediatek/patches-4.4/0051-net-next-mediatek-add-an-entry-to-MAINTAINERS.patch @@ -13,7 +13,7 @@ Signed-off-by: John Crispin --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -6907,6 +6907,13 @@ F: include/uapi/linux/meye.h +@@ -6902,6 +6902,13 @@ F: include/uapi/linux/meye.h F: include/uapi/linux/ivtv* F: include/uapi/linux/uvcvideo.h diff --git a/target/linux/mediatek/patches-4.4/0099-MAINTAINERS-change-my-email-address.patch b/target/linux/mediatek/patches-4.4/0099-MAINTAINERS-change-my-email-address.patch index f0cf4ea7d2..1bad613a80 100644 --- a/target/linux/mediatek/patches-4.4/0099-MAINTAINERS-change-my-email-address.patch +++ b/target/linux/mediatek/patches-4.4/0099-MAINTAINERS-change-my-email-address.patch @@ -12,7 +12,7 @@ Signed-off-by: John Crispin --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -6909,7 +6909,7 @@ F: include/uapi/linux/uvcvideo.h +@@ -6904,7 +6904,7 @@ F: include/uapi/linux/uvcvideo.h MEDIATEK ETHERNET DRIVER M: Felix Fietkau diff --git a/target/linux/mediatek/patches-4.4/0100-MAINTAINERS-add-Sean-as-mediatek-ethernet-maintainer.patch b/target/linux/mediatek/patches-4.4/0100-MAINTAINERS-add-Sean-as-mediatek-ethernet-maintainer.patch index b3ebaf13e2..145868c1f0 100644 --- a/target/linux/mediatek/patches-4.4/0100-MAINTAINERS-add-Sean-as-mediatek-ethernet-maintainer.patch +++ b/target/linux/mediatek/patches-4.4/0100-MAINTAINERS-add-Sean-as-mediatek-ethernet-maintainer.patch @@ -15,7 +15,7 @@ Signed-off-by: John Crispin --- a/MAINTAINERS +++ b/MAINTAINERS -@@ -6910,6 +6910,7 @@ F: include/uapi/linux/uvcvideo.h +@@ -6905,6 +6905,7 @@ F: include/uapi/linux/uvcvideo.h MEDIATEK ETHERNET DRIVER M: Felix Fietkau M: John Crispin diff --git a/target/linux/ramips/patches-4.4/0033-xhci-mediatek-support-MTK-xHCI-host-controller.patch b/target/linux/ramips/patches-4.4/0033-xhci-mediatek-support-MTK-xHCI-host-controller.patch index 1bd29747b8..76b2d15f1c 100644 --- a/target/linux/ramips/patches-4.4/0033-xhci-mediatek-support-MTK-xHCI-host-controller.patch +++ b/target/linux/ramips/patches-4.4/0033-xhci-mediatek-support-MTK-xHCI-host-controller.patch @@ -1420,7 +1420,7 @@ Signed-off-by: Greg Kroah-Hartman /* * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA -@@ -3088,17 +3089,22 @@ static u32 xhci_td_remainder(struct xhci +@@ -3121,17 +3122,22 @@ static u32 xhci_td_remainder(struct xhci { u32 maxp, total_packet_count; @@ -1447,7 +1447,7 @@ Signed-off-by: Greg Kroah-Hartman /* Queueing functions don't count the current TRB into transferred */ return (total_packet_count - ((transferred + trb_buff_len) / maxp)); } -@@ -3486,7 +3492,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * +@@ -3519,7 +3525,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * field |= 0x1; /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */ @@ -1507,11 +1507,11 @@ Signed-off-by: Greg Kroah-Hartman --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1631,6 +1631,7 @@ struct xhci_hcd { +@@ -1634,6 +1634,7 @@ struct xhci_hcd { /* For controllers with a broken beyond repair streams implementation */ #define XHCI_BROKEN_STREAMS (1 << 19) #define XHCI_PME_STUCK_QUIRK (1 << 20) +#define XHCI_MTK_HOST (1 << 21) + #define XHCI_MISSING_CAS (1 << 24) unsigned int num_active_eps; unsigned int limit_active_eps; - /* There are two roothubs to keep track of bus suspend info for */ diff --git a/target/linux/ramips/patches-4.4/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-4.4/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch index 67c0b29898..3ec5fbc417 100644 --- a/target/linux/ramips/patches-4.4/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch +++ b/target/linux/ramips/patches-4.4/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch @@ -25,7 +25,7 @@ Signed-off-by: John Crispin --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig -@@ -811,3 +811,5 @@ config MMC_MTK +@@ -786,3 +786,5 @@ config MMC_MTK If you have a machine with a integrated SD/MMC card reader, say Y or M here. This is needed if support for any SD/SDIO/MMC devices is required. If unsure, say N. diff --git a/target/linux/ramips/patches-4.4/0519-gsw_mt7621.patch b/target/linux/ramips/patches-4.4/0519-gsw_mt7621.patch index c8fbc6404c..e146de235c 100644 --- a/target/linux/ramips/patches-4.4/0519-gsw_mt7621.patch +++ b/target/linux/ramips/patches-4.4/0519-gsw_mt7621.patch @@ -1,6 +1,6 @@ --- a/drivers/net/ethernet/mediatek/mt7530.c +++ b/drivers/net/ethernet/mediatek/mt7530.c -@@ -543,6 +543,7 @@ mt7530_apply_config(struct switch_dev *d +@@ -547,6 +547,7 @@ mt7530_apply_config(struct switch_dev *d u8 etags = priv->vlan_entries[i].etags; u32 val; @@ -8,7 +8,7 @@ /* vid of vlan */ val = mt7530_r32(priv, REG_ESW_VLAN_VTIM(i)); if (i % 2 == 0) { -@@ -553,7 +554,7 @@ mt7530_apply_config(struct switch_dev *d +@@ -557,7 +558,7 @@ mt7530_apply_config(struct switch_dev *d val |= (vid << 12); } mt7530_w32(priv, REG_ESW_VLAN_VTIM(i), val); @@ -17,7 +17,7 @@ /* vlan port membership */ if (member) mt7530_w32(priv, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC | -@@ -573,7 +574,11 @@ mt7530_apply_config(struct switch_dev *d +@@ -577,7 +578,11 @@ mt7530_apply_config(struct switch_dev *d mt7530_w32(priv, REG_ESW_VLAN_VAWD2, val); /* write to vlan table */ diff --git a/target/linux/ramips/patches-4.4/200-rt3883-fix-pinctrl-typo.patch b/target/linux/ramips/patches-4.4/200-rt3883-fix-pinctrl-typo.patch index f784d85fd6..aa55fd96ba 100644 --- a/target/linux/ramips/patches-4.4/200-rt3883-fix-pinctrl-typo.patch +++ b/target/linux/ramips/patches-4.4/200-rt3883-fix-pinctrl-typo.patch @@ -8,11 +8,9 @@ Signed-off-by: Daniel Golle arch/mips/ralink/rt3883.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c -index 4cef9162bd9b..47f9849bda3a 100644 --- a/arch/mips/ralink/rt3883.c +++ b/arch/mips/ralink/rt3883.c -@@ -36,7 +36,7 @@ static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) }; +@@ -36,7 +36,7 @@ static struct rt2880_pmx_func uartlite_f static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) }; static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) }; @@ -21,6 +19,3 @@ index 4cef9162bd9b..47f9849bda3a 100644 static struct rt2880_pmx_func pci_func[] = { FUNC("pci-dev", 0, 40, 32), FUNC("pci-host2", 1, 40, 32), --- -2.11.0 -