From: Linus Walleij <linus.walleij@linaro.org>
Date: Sun, 9 Jun 2019 23:13:39 +0000 (+0200)
Subject: drm/bridge: analogix_dp: Convert to GPIO descriptors
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5b038dcf9d0aa0b1e8f2a8f973441b4f66d325f2;p=openwrt%2Fstaging%2Fblogic.git

drm/bridge: analogix_dp: Convert to GPIO descriptors

This converts the Analogix display port to use GPIO descriptors
instead of DT-extracted numbers.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609231339.22136-1-linus.walleij@linaro.org
---

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index e7f9231b5ad4..8a57ecfc8fb4 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -13,13 +13,12 @@
 #include <linux/clk.h>
 #include <linux/component.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 
@@ -1583,12 +1582,18 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 
 	dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd");
 
-	dp->hpd_gpio = of_get_named_gpio(dev->of_node, "hpd-gpios", 0);
-	if (!gpio_is_valid(dp->hpd_gpio))
-		dp->hpd_gpio = of_get_named_gpio(dev->of_node,
-						 "samsung,hpd-gpio", 0);
+	/* Try two different names */
+	dp->hpd_gpiod = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
+	if (!dp->hpd_gpiod)
+		dp->hpd_gpiod = devm_gpiod_get_optional(dev, "samsung,hpd",
+							GPIOD_IN);
+	if (IS_ERR(dp->hpd_gpiod)) {
+		dev_err(dev, "error getting HDP GPIO: %ld\n",
+			PTR_ERR(dp->hpd_gpiod));
+		return ERR_CAST(dp->hpd_gpiod);
+	}
 
-	if (gpio_is_valid(dp->hpd_gpio)) {
+	if (dp->hpd_gpiod) {
 		/*
 		 * Set up the hotplug GPIO from the device tree as an interrupt.
 		 * Simply specifying a different interrupt in the device tree
@@ -1596,16 +1601,9 @@ analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,
 		 * using a GPIO.  We also need the actual GPIO specifier so
 		 * that we can get the current state of the GPIO.
 		 */
-		ret = devm_gpio_request_one(&pdev->dev, dp->hpd_gpio, GPIOF_IN,
-					    "hpd_gpio");
-		if (ret) {
-			dev_err(&pdev->dev, "failed to get hpd gpio\n");
-			return ERR_PTR(ret);
-		}
-		dp->irq = gpio_to_irq(dp->hpd_gpio);
+		dp->irq = gpiod_to_irq(dp->hpd_gpiod);
 		irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
 	} else {
-		dp->hpd_gpio = -ENODEV;
 		dp->irq = platform_get_irq(pdev, 0);
 		irq_flags = 0;
 	}
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 3e5fe90edf71..e483f5cecd55 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -38,6 +38,8 @@
 #define DPCD_VOLTAGE_SWING_SET(x)		(((x) & 0x3) << 0)
 #define DPCD_VOLTAGE_SWING_GET(x)		(((x) >> 0) & 0x3)
 
+struct gpio_desc;
+
 enum link_lane_count_type {
 	LANE_COUNT1 = 1,
 	LANE_COUNT2 = 2,
@@ -171,7 +173,7 @@ struct analogix_dp_device {
 	struct link_train	link_train;
 	struct phy		*phy;
 	int			dpms_mode;
-	int			hpd_gpio;
+	struct gpio_desc	*hpd_gpiod;
 	bool                    force_hpd;
 	bool			psr_enable;
 	bool			fast_train_enable;
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index cf17e2e21b15..b1d6c33585e7 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -12,7 +12,7 @@
 
 #include <linux/delay.h>
 #include <linux/device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
 
@@ -397,7 +397,7 @@ void analogix_dp_clear_hotplug_interrupts(struct analogix_dp_device *dp)
 {
 	u32 reg;
 
-	if (gpio_is_valid(dp->hpd_gpio))
+	if (dp->hpd_gpiod)
 		return;
 
 	reg = HOTPLUG_CHG | HPD_LOST | PLUG;
@@ -411,7 +411,7 @@ void analogix_dp_init_hpd(struct analogix_dp_device *dp)
 {
 	u32 reg;
 
-	if (gpio_is_valid(dp->hpd_gpio))
+	if (dp->hpd_gpiod)
 		return;
 
 	analogix_dp_clear_hotplug_interrupts(dp);
@@ -434,8 +434,8 @@ enum dp_irq_type analogix_dp_get_irq_type(struct analogix_dp_device *dp)
 {
 	u32 reg;
 
-	if (gpio_is_valid(dp->hpd_gpio)) {
-		reg = gpio_get_value(dp->hpd_gpio);
+	if (dp->hpd_gpiod) {
+		reg = gpiod_get_value(dp->hpd_gpiod);
 		if (reg)
 			return DP_IRQ_TYPE_HP_CABLE_IN;
 		else
@@ -507,8 +507,8 @@ int analogix_dp_get_plug_in_status(struct analogix_dp_device *dp)
 {
 	u32 reg;
 
-	if (gpio_is_valid(dp->hpd_gpio)) {
-		if (gpio_get_value(dp->hpd_gpio))
+	if (dp->hpd_gpiod) {
+		if (gpiod_get_value(dp->hpd_gpiod))
 			return 0;
 	} else {
 		reg = readl(dp->reg_base + ANALOGIX_DP_SYS_CTL_3);