From: Jo-Philipp Wich Date: Wed, 18 Apr 2018 09:36:53 +0000 (+0200) Subject: luci-base: switch to lucihttp based POST data processing X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=59dea0230cbbea75459c4e61d1da64629d1da31b;p=project%2Fluci.git luci-base: switch to lucihttp based POST data processing Use the liblucihttp provided multipart and x-www-urlencoded body parsers and drop the old Lua parsing code. The C based data parsers are way faster than their old Lua counterparts while producing less string garbage and more correct results. While refactoring the luci.http.protocol code, also drop unused functions and dead code, heavily reducing the module size. Signed-off-by: Jo-Philipp Wich --- diff --git a/modules/luci-base/luasrc/http/protocol.lua b/modules/luci-base/luasrc/http/protocol.lua index 096ae46f4a..7bbc55637b 100644 --- a/modules/luci-base/luasrc/http/protocol.lua +++ b/modules/luci-base/luasrc/http/protocol.lua @@ -1,12 +1,16 @@ --- Copyright 2008 Freifunk Leipzig / Jo-Philipp Wich +-- Copyright 2008-2018 Jo-Philipp Wich -- Licensed to the public under the Apache License 2.0. -- This class contains several functions useful for http message- and content -- decoding and to retrive form data from raw http messages. -module("luci.http.protocol", package.seeall) -local ltn12 = require("luci.ltn12") -local util = require("luci.util") +local require, type, tonumber = require, type, tonumber +local table, pairs, ipairs, pcall = table, pairs, ipairs, pcall + +module "luci.http.protocol" + +local ltn12 = require "luci.ltn12" +local lhttp = require "lucihttp" HTTP_MAX_CONTENT = 1024*8 -- 8 kB maximum content size @@ -14,32 +18,25 @@ HTTP_MAX_CONTENT = 1024*8 -- 8 kB maximum content size -- Simple parameters are stored as string values associated with the parameter -- name within the table. Parameters with multiple values are stored as array -- containing the corresponding values. -function urldecode_params( url, tbl ) - +function urldecode_params(url, tbl) + local parser, name local params = tbl or { } - if url:find("?") then - url = url:gsub( "^.+%?([^?]+)", "%1" ) - end - - for pair in url:gmatch( "[^&;]+" ) do - - -- find key and value - local key = util.urldecode( pair:match("^([^=]+)") ) - local val = util.urldecode( pair:match("^[^=]+=(.+)$") ) + parser = lhttp.urlencoded_parser(function (what, buffer, length) + if what == parser.TUPLE then + name, value = nil, nil + elseif what == parser.NAME then + name = lhttp.urldecode(buffer) + elseif what == parser.VALUE and name then + params[name] = lhttp.urldecode(buffer) or "" + end - -- store - if type(key) == "string" and key:len() > 0 then - if type(val) ~= "string" then val = "" end + return true + end) - if not params[key] then - params[key] = val - elseif type(params[key]) ~= "table" then - params[key] = { params[key], val } - else - table.insert( params[key], val ) - end - end + if parser then + parser:parse((url or ""):match("[^?]*$")) + parser:parse(nil) end return params @@ -47,185 +44,37 @@ end -- separated by "&". Tables are encoded as parameters with multiple values by -- repeating the parameter name with each value. -function urlencode_params( tbl ) - local enc = "" - +function urlencode_params(tbl) + local k, v + local n, enc = 1, {} for k, v in pairs(tbl) do if type(v) == "table" then + local i, v2 for i, v2 in ipairs(v) do - enc = enc .. ( #enc > 0 and "&" or "" ) .. - util.urlencode(k) .. "=" .. util.urlencode(v2) - end - else - enc = enc .. ( #enc > 0 and "&" or "" ) .. - util.urlencode(k) .. "=" .. util.urlencode(v) - end - end - - return enc -end - --- (Internal function) --- Initialize given parameter and coerce string into table when the parameter --- already exists. -local function __initval( tbl, key ) - if tbl[key] == nil then - tbl[key] = "" - elseif type(tbl[key]) == "string" then - tbl[key] = { tbl[key], "" } - else - table.insert( tbl[key], "" ) - end -end - --- (Internal function) --- Initialize given file parameter. -local function __initfileval( tbl, key, filename, fd ) - if tbl[key] == nil then - tbl[key] = { file=filename, fd=fd, name=key, "" } - else - table.insert( tbl[key], "" ) - end -end - --- (Internal function) --- Append given data to given parameter, either by extending the string value --- or by appending it to the last string in the parameter's value table. -local function __appendval( tbl, key, chunk ) - if type(tbl[key]) == "table" then - tbl[key][#tbl[key]] = tbl[key][#tbl[key]] .. chunk - else - tbl[key] = tbl[key] .. chunk - end -end - --- (Internal function) --- Finish the value of given parameter, either by transforming the string value --- or - in the case of multi value parameters - the last element in the --- associated values table. -local function __finishval( tbl, key, handler ) - if handler then - if type(tbl[key]) == "table" then - tbl[key][#tbl[key]] = handler( tbl[key][#tbl[key]] ) - else - tbl[key] = handler( tbl[key] ) - end - end -end - - --- Table of our process states -local process_states = { } - --- Extract "magic", the first line of a http message. --- Extracts the message type ("get", "post" or "response"), the requested uri --- or the status code if the line descripes a http response. -process_states['magic'] = function( msg, chunk, err ) - - if chunk ~= nil then - -- ignore empty lines before request - if #chunk == 0 then - return true, nil - end - - -- Is it a request? - local method, uri, http_ver = chunk:match("^([A-Z]+) ([^ ]+) HTTP/([01]%.[019])$") - - -- Yup, it is - if method then - - msg.type = "request" - msg.request_method = method:lower() - msg.request_uri = uri - msg.http_version = tonumber( http_ver ) - msg.headers = { } + if enc[1] then + enc[n] = "&" + n = n + 1 + end - -- We're done, next state is header parsing - return true, function( chunk ) - return process_states['headers']( msg, chunk ) + enc[n+0] = lhttp.urlencode(k) + enc[n+1] = "=" + enc[n+2] = lhttp.urlencode(v2) + n = n + 3 end - - -- Is it a response? else - - local http_ver, code, message = chunk:match("^HTTP/([01]%.[019]) ([0-9]+) ([^\r\n]+)$") - - -- Is a response - if code then - - msg.type = "response" - msg.status_code = code - msg.status_message = message - msg.http_version = tonumber( http_ver ) - msg.headers = { } - - -- We're done, next state is header parsing - return true, function( chunk ) - return process_states['headers']( msg, chunk ) - end + if enc[1] then + enc[n] = "&" + n = n + 1 end - end - end - - -- Can't handle it - return nil, "Invalid HTTP message magic" -end - - --- Extract headers from given string. -process_states['headers'] = function( msg, chunk ) - - if chunk ~= nil then - - -- Look for a valid header format - local hdr, val = chunk:match( "^([A-Za-z][A-Za-z0-9%-_]+): +(.+)$" ) - - if type(hdr) == "string" and hdr:len() > 0 and - type(val) == "string" and val:len() > 0 - then - msg.headers[hdr] = val - -- Valid header line, proceed - return true, nil - - elseif #chunk == 0 then - -- Empty line, we won't accept data anymore - return false, nil - else - -- Junk data - return nil, "Invalid HTTP header received" + enc[n+0] = lhttp.urlencode(k) + enc[n+1] = "=" + enc[n+2] = lhttp.urlencode(v) + n = n + 3 end - else - return nil, "Unexpected EOF" end -end - --- data line by line with the trailing \r\n stripped of. -function header_source( sock ) - return ltn12.source.simplify( function() - - local chunk, err, part = sock:receive("*l") - - -- Line too long - if chunk == nil then - if err ~= "timeout" then - return nil, part - and "Line exceeds maximum allowed length" - or "Unexpected EOF" - else - return nil, err - end - - -- Line ok - elseif chunk ~= nil then - - -- Strip trailing CR - chunk = chunk:gsub("\r$","") - - return chunk, nil - end - end ) + return table.concat(enc, "") end -- Content-Type. Stores all extracted data associated with its parameter name @@ -238,286 +87,125 @@ end -- o Table containing decoded (name, file) and raw (headers) mime header data -- o String value containing a chunk of the file data -- o Boolean which indicates wheather the current chunk is the last one (eof) -function mimedecode_message_body( src, msg, filecb ) - - if msg and msg.env.CONTENT_TYPE then - msg.mime_boundary = msg.env.CONTENT_TYPE:match("^multipart/form%-data; boundary=(.+)$") - end - - if not msg.mime_boundary then - return nil, "Invalid Content-Type found" - end - +function mimedecode_message_body(src, msg, file_cb) + local parser, header, field + local len, maxlen = 0, tonumber(msg.env.CONTENT_LENGTH or nil) - local tlen = 0 - local inhdr = false - local field = nil - local store = nil - local lchunk = nil + parser, err = lhttp.multipart_parser(msg.env.CONTENT_TYPE, function (what, buffer, length) + if what == parser.PART_INIT then + field = { } - local function parse_headers( chunk, field ) + elseif what == parser.HEADER_NAME then + header = buffer:lower() - local stat - repeat - chunk, stat = chunk:gsub( - "^([A-Z][A-Za-z0-9%-_]+): +([^\r\n]+)\r\n", - function(k,v) - field.headers[k] = v - return "" - end - ) - until stat == 0 - - chunk, stat = chunk:gsub("^\r\n","") - - -- End of headers - if stat > 0 then - if field.headers["Content-Disposition"] then - if field.headers["Content-Disposition"]:match("^form%-data; ") then - field.name = field.headers["Content-Disposition"]:match('name="(.-)"') - field.file = field.headers["Content-Disposition"]:match('filename="(.+)"$') - end + elseif what == parser.HEADER_VALUE and header then + if header:lower() == "content-disposition" and + lhttp.header_attribute(buffer, nil) == "form-data" + then + field.name = lhttp.header_attribute(buffer, "name") + field.file = lhttp.header_attribute(buffer, "filename") end - if not field.headers["Content-Type"] then - field.headers["Content-Type"] = "text/plain" + if field.headers then + field.headers[header] = buffer + else + field.headers = { [header] = buffer } end - if field.name and field.file and filecb then - __initval( msg.params, field.name ) - __appendval( msg.params, field.name, field.file ) - - store = filecb - elseif field.name and field.file then - local nxf = require "nixio" - local fd = nxf.mkstemp(field.name) - __initfileval ( msg.params, field.name, field.file, fd ) - if fd then - store = function(hdr, buf, eof) - fd:write(buf) - if (eof) then - fd:seek(0, "set") - end - end + elseif what == parser.PART_BEGIN then + return not field.file + + elseif what == parser.PART_DATA and field.name and length > 0 then + if field.file then + if file_cb then + file_cb(field, buffer, false) + msg.params[field.name] = msg.params[field.name] or field else - store = function( hdr, buf, eof ) - __appendval( msg.params, field.name, buf ) + if not field.fd then + local ok, nx = pcall(require, "nixio") + field.fd = ok and nx.mkstemp(field.name) + end + + if field.fd then + field.fd:write(buffer) + msg.params[field.name] = msg.params[field.name] or field end end - elseif field.name then - __initval( msg.params, field.name ) + else + field.value = buffer + end - store = function( hdr, buf, eof ) - __appendval( msg.params, field.name, buf ) + elseif what == parser.PART_END and field.name then + if field.file and msg.params[field.name] then + if file_cb then + file_cb(field, "", true) + elseif field.fd then + field.fd:seek(0, "set") end else - store = nil + msg.params[field.name] = field.value or "" end - return chunk, true - end + field = nil - return chunk, false - end + elseif what == parser.ERROR then + err = buffer + end - local function snk( chunk ) + return true + end) - tlen = tlen + ( chunk and #chunk or 0 ) + return ltn12.pump.all(src, function (chunk) + len = len + (chunk and #chunk or 0) - if msg.env.CONTENT_LENGTH and tlen > tonumber(msg.env.CONTENT_LENGTH) + 2 then + if maxlen and len > maxlen + 2 then return nil, "Message body size exceeds Content-Length" end - if chunk and not lchunk then - lchunk = "\r\n" .. chunk - - elseif lchunk then - local data = lchunk .. ( chunk or "" ) - local spos, epos, found - - repeat - spos, epos = data:find( "\r\n--" .. msg.mime_boundary .. "\r\n", 1, true ) - - if not spos then - spos, epos = data:find( "\r\n--" .. msg.mime_boundary .. "--\r\n", 1, true ) - end - - - if spos then - local predata = data:sub( 1, spos - 1 ) - - if inhdr then - predata, eof = parse_headers( predata, field ) - - if not eof then - return nil, "Invalid MIME section header" - elseif not field.name then - return nil, "Invalid Content-Disposition header" - end - end - - if store then - store( field, predata, true ) - end - - - field = { headers = { } } - found = found or true - - data, eof = parse_headers( data:sub( epos + 1, #data ), field ) - inhdr = not eof - end - until not spos - - if found then - -- We found at least some boundary. Save - -- the unparsed remaining data for the - -- next chunk. - lchunk, data = data, nil - else - -- There was a complete chunk without a boundary. Parse it as headers or - -- append it as data, depending on our current state. - if inhdr then - lchunk, eof = parse_headers( data, field ) - inhdr = not eof - else - -- We're inside data, so append the data. Note that we only append - -- lchunk, not all of data, since there is a chance that chunk - -- contains half a boundary. Assuming that each chunk is at least the - -- boundary in size, this should prevent problems - store( field, lchunk, false ) - lchunk, chunk = chunk, nil - end - end + if not parser or not parser:parse(chunk) then + return nil, err end return true - end - - return ltn12.pump.all( src, snk ) + end) end -- Content-Type. Stores all extracted data associated with its parameter name -- in the params table within the given message object. Multiple parameter -- values are stored as tables, ordinary ones as strings. -function urldecode_message_body( src, msg ) - - local tlen = 0 - local lchunk = nil - - local function snk( chunk ) - - tlen = tlen + ( chunk and #chunk or 0 ) - - if msg.env.CONTENT_LENGTH and tlen > tonumber(msg.env.CONTENT_LENGTH) + 2 then - return nil, "Message body size exceeds Content-Length" - elseif tlen > HTTP_MAX_CONTENT then - return nil, "Message body size exceeds maximum allowed length" - end - - if not lchunk and chunk then - lchunk = chunk - - elseif lchunk then - local data = lchunk .. ( chunk or "&" ) - local spos, epos - - repeat - spos, epos = data:find("^.-[;&]") - - if spos then - local pair = data:sub( spos, epos - 1 ) - local key = pair:match("^(.-)=") - local val = pair:match("=([^%s]*)%s*$") - - if key and #key > 0 then - __initval( msg.params, key ) - __appendval( msg.params, key, val ) - __finishval( msg.params, key, urldecode ) - end - - data = data:sub( epos + 1, #data ) - end - until not spos - - lchunk = data +function urldecode_message_body(src, msg) + local err, name, value, parser + local len, maxlen = 0, tonumber(msg.env.CONTENT_LENGTH or nil) + + parser = lhttp.urlencoded_parser(function (what, buffer, length) + if what == parser.TUPLE then + name, value = nil, nil + elseif what == parser.NAME then + name = lhttp.urldecode(buffer) + elseif what == parser.VALUE and name then + msg.params[name] = lhttp.urldecode(buffer) or "" + elseif what == parser.ERROR then + err = buffer end return true - end - - return ltn12.pump.all( src, snk ) -end + end) --- version, message headers and resulting CGI environment variables from the --- given ltn12 source. -function parse_message_header( src ) + return ltn12.pump.all(src, function (chunk) + len = len + (chunk and #chunk or 0) - local ok = true - local msg = { } - - local sink = ltn12.sink.simplify( - function( chunk ) - return process_states['magic']( msg, chunk ) + if maxlen and len > maxlen + 2 then + return nil, "Message body size exceeds Content-Length" + elseif len > HTTP_MAX_CONTENT then + return nil, "Message body size exceeds maximum allowed length" end - ) - - -- Pump input data... - while ok do - - -- get data - ok, err = ltn12.pump.step( src, sink ) - -- error - if not ok and err then + if not parser or not parser:parse(chunk) then return nil, err - - -- eof - elseif not ok then - - -- Process get parameters - if ( msg.request_method == "get" or msg.request_method == "post" ) and - msg.request_uri:match("?") - then - msg.params = urldecode_params( msg.request_uri ) - else - msg.params = { } - end - - -- Populate common environment variables - msg.env = { - CONTENT_LENGTH = msg.headers['Content-Length']; - CONTENT_TYPE = msg.headers['Content-Type'] or msg.headers['Content-type']; - REQUEST_METHOD = msg.request_method:upper(); - REQUEST_URI = msg.request_uri; - SCRIPT_NAME = msg.request_uri:gsub("?.+$",""); - SCRIPT_FILENAME = ""; -- XXX implement me - SERVER_PROTOCOL = "HTTP/" .. string.format("%.1f", msg.http_version); - QUERY_STRING = msg.request_uri:match("?") - and msg.request_uri:gsub("^.+?","") or "" - } - - -- Populate HTTP_* environment variables - for i, hdr in ipairs( { - 'Accept', - 'Accept-Charset', - 'Accept-Encoding', - 'Accept-Language', - 'Connection', - 'Cookie', - 'Host', - 'Referer', - 'User-Agent', - } ) do - local var = 'HTTP_' .. hdr:upper():gsub("%-","_") - local val = msg.headers[hdr] - - msg.env[var] = val - end end - end - return msg + return true + end) end -- This function will examine the Content-Type within the given message object @@ -526,17 +214,18 @@ end -- mime types are supported. If the encountered content encoding can't be -- handled then the whole message body will be stored unaltered as "content" -- property within the given message object. -function parse_message_body( src, msg, filecb ) +function parse_message_body(src, msg, filecb) + local ctype = lhttp.header_attribute(msg.env.CONTENT_TYPE, nil) + -- Is it multipart/mime ? - if msg.env.REQUEST_METHOD == "POST" and msg.env.CONTENT_TYPE and - msg.env.CONTENT_TYPE:match("^multipart/form%-data") + if msg.env.REQUEST_METHOD == "POST" and + ctype == "multipart/form-data" then - return mimedecode_message_body( src, msg, filecb ) -- Is it application/x-www-form-urlencoded ? - elseif msg.env.REQUEST_METHOD == "POST" and msg.env.CONTENT_TYPE and - msg.env.CONTENT_TYPE:match("^application/x%-www%-form%-urlencoded") + elseif msg.env.REQUEST_METHOD == "POST" and + ctype == "application/x-www-form-urlencoded" then return urldecode_message_body( src, msg, filecb ) @@ -594,21 +283,3 @@ function parse_message_body( src, msg, filecb ) return true end end - -statusmsg = { - [200] = "OK", - [206] = "Partial Content", - [301] = "Moved Permanently", - [302] = "Found", - [304] = "Not Modified", - [400] = "Bad Request", - [403] = "Forbidden", - [404] = "Not Found", - [405] = "Method Not Allowed", - [408] = "Request Time-out", - [411] = "Length Required", - [412] = "Precondition Failed", - [416] = "Requested range not satisfiable", - [500] = "Internal Server Error", - [503] = "Server Unavailable", -} diff --git a/modules/luci-base/luasrc/http/protocol.luadoc b/modules/luci-base/luasrc/http/protocol.luadoc index cf3d5b2d2f..0c9ff6fa4c 100644 --- a/modules/luci-base/luasrc/http/protocol.luadoc +++ b/modules/luci-base/luasrc/http/protocol.luadoc @@ -8,47 +8,41 @@ module "luci.http.protocol" ---[[ Extract and split urlencoded data pairs, separated bei either "&" or ";" - from given url or string. Returns a table with urldecoded values. + Simple parameters are stored as string values associated with the parameter name within the table. Parameters with multiple values are stored as array containing the corresponding values. -@class function -@name urldecode_params -@param url The url or string which contains x-www-urlencoded form data -@param tbl Use the given table for storing values (optional) -@return Table containing the urldecoded parameters + +@class function +@name urldecode_params +@param url The url or string which contains x-www-urlencoded form data +@param tbl Use the given table for storing values (optional) +@return Table containing the urldecoded parameters @see urlencode_params ]] ---[[ Encode each key-value-pair in given table to x-www-urlencoded format, +separated by "&". -separated by "&". Tables are encoded as parameters with multiple values by -repeating the parameter name with each value. -@class function -@name urlencode_params -@param tbl Table with the values -@return String containing encoded values -@see urldecode_params -]] - ----[[ -Creates a ltn12 source from the given socket. The source will return it's +Tables are encoded as parameters with multiple values by repeating the +parameter name with each value. -data line by line with the trailing \r\n stripped of. -@class function -@name header_source -@param sock Readable network socket -@return Ltn12 source function +@class function +@name urlencode_params +@param tbl Table with the values +@return String containing encoded values +@see urldecode_params ]] ---[[ -Decode a mime encoded http message body with multipart/form-data +Decode a mime encoded http message body with multipart/form-data Content-Type. -Content-Type. Stores all extracted data associated with its parameter name +Stores all extracted data associated with its parameter name in the params table within the given message object. Multiple parameter values are stored as tables, ordinary ones as strings. + If an optional file callback function is given then it is feeded with the file contents chunk by chunk and only the extracted file name is stored within the params table. The callback function will be called subsequently @@ -56,65 +50,50 @@ with three arguments: o Table containing decoded (name, file) and raw (headers) mime header data o String value containing a chunk of the file data o Boolean which indicates wheather the current chunk is the last one (eof) -@class function -@name mimedecode_message_body + +@class function +@name mimedecode_message_body @param src Ltn12 source function @param msg HTTP message object @param filecb File callback function (optional) @return Value indicating successful operation (not nil means "ok") @return String containing the error if unsuccessful -@see parse_message_header +@see parse_message_header ]] ---[[ Decode an urlencoded http message body with application/x-www-urlencoded +Content-Type. -Content-Type. Stores all extracted data associated with its parameter name -in the params table within the given message object. Multiple parameter -values are stored as tables, ordinary ones as strings. -@class function -@name urldecode_message_body -@param src Ltn12 source function -@param msg HTTP message object -@return Value indicating successful operation (not nil means "ok") -@return String containing the error if unsuccessful -@see parse_message_header -]] +Stores all extracted data associated with its parameter name in the params +table within the given message object. Multiple parameter values are stored +as tables, ordinary ones as strings. ----[[ -Try to extract an http message header including information like protocol - -version, message headers and resulting CGI environment variables from the -given ltn12 source. -@class function -@name parse_message_header -@param src Ltn12 source function -@return HTTP message object -@see parse_message_body +@class function +@name urldecode_message_body +@param src Ltn12 source function +@param msg HTTP message object +@return Value indicating successful operation (not nil means "ok") +@return String containing the error if unsuccessful +@see parse_message_header ]] ---[[ Try to extract and decode a http message body from the given ltn12 source. - This function will examine the Content-Type within the given message object to select the appropriate content decoder. + Currently the application/x-www-urlencoded and application/form-data mime types are supported. If the encountered content encoding can't be handled then the whole message body will be stored unaltered as "content" property within the given message object. -@class function -@name parse_message_body + +@class function +@name parse_message_body @param src Ltn12 source function @param msg HTTP message object @param filecb File data callback (optional, see mimedecode_message_body()) @return Value indicating successful operation (not nil means "ok") @return String containing the error if unsuccessful -@see parse_message_header -]] - ----[[ -Table containing human readable messages for several http status codes. - -@class table +@see parse_message_header ]] -