From: Axel Lin Date: Thu, 16 Sep 2010 08:48:49 +0000 (+0800) Subject: Regulator: LP3972 PMIC regulator driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5976f0959d5251ae5b4db848eaa2f42a19e98652;p=openwrt%2Fstaging%2Fblogic.git Regulator: LP3972 PMIC regulator driver This patch adds regulator drivers for National Semiconductors LP3972 PMIC. This LP3972 PMIC controller has 3 DC/DC voltage converters and 5 low drop-out (LDO) regulators. LP3972 PMIC controller uses I2C interface. Signed-off-by: Axel Lin Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 4889caabc632..dd30e883d4a7 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -172,6 +172,13 @@ config REGULATOR_LP3971 Say Y here to support the voltage regulators and convertors on National Semiconductors LP3971 PMIC +config REGULATOR_LP3972 + tristate "National Semiconductors LP3972 PMIC regulator driver" + depends on I2C + help + Say Y here to support the voltage regulators and convertors + on National Semiconductors LP3972 PMIC + config REGULATOR_PCAP tristate "PCAP2 regulator driver" depends on EZX_PCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index beff6da6eff6..6cae6419b8b1 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o obj-$(CONFIG_REGULATOR_DUMMY) += dummy.o obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o +obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c new file mode 100644 index 000000000000..0d9b47569c1b --- /dev/null +++ b/drivers/regulator/lp3972.c @@ -0,0 +1,649 @@ +/* + * Regulator driver for National Semiconductors LP3972 PMIC chip + * + * Based on lp3971.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +struct lp3972 { + struct device *dev; + struct mutex io_lock; + struct i2c_client *i2c; + int num_regulators; + struct regulator_dev **rdev; +}; + +/* LP3972 Control Registers */ +#define LP3972_SCR_REG 0x07 +#define LP3972_OVER1_REG 0x10 +#define LP3972_OVSR1_REG 0x11 +#define LP3972_OVER2_REG 0x12 +#define LP3972_OVSR2_REG 0x13 +#define LP3972_VCC1_REG 0x20 +#define LP3972_ADTV1_REG 0x23 +#define LP3972_ADTV2_REG 0x24 +#define LP3972_AVRC_REG 0x25 +#define LP3972_CDTC1_REG 0x26 +#define LP3972_CDTC2_REG 0x27 +#define LP3972_SDTV1_REG 0x29 +#define LP3972_SDTV2_REG 0x2A +#define LP3972_MDTV1_REG 0x32 +#define LP3972_MDTV2_REG 0x33 +#define LP3972_L2VCR_REG 0x39 +#define LP3972_L34VCR_REG 0x3A +#define LP3972_SCR1_REG 0x80 +#define LP3972_SCR2_REG 0x81 +#define LP3972_OEN3_REG 0x82 +#define LP3972_OSR3_REG 0x83 +#define LP3972_LOER4_REG 0x84 +#define LP3972_B2TV_REG 0x85 +#define LP3972_B3TV_REG 0x86 +#define LP3972_B32RC_REG 0x87 +#define LP3972_ISRA_REG 0x88 +#define LP3972_BCCR_REG 0x89 +#define LP3972_II1RR_REG 0x8E +#define LP3972_II2RR_REG 0x8F + +#define LP3972_SYS_CONTROL1_REG LP3972_SCR1_REG +/* System control register 1 initial value, + * bits 5, 6 and 7 are EPROM programmable */ +#define SYS_CONTROL1_INIT_VAL 0x02 +#define SYS_CONTROL1_INIT_MASK 0x1F + +#define LP3972_VOL_CHANGE_REG LP3972_VCC1_REG +#define LP3972_VOL_CHANGE_FLAG_GO 0x01 +#define LP3972_VOL_CHANGE_FLAG_MASK 0x03 + +/* LDO output enable mask */ +#define LP3972_OEN3_L1EN BIT(0) +#define LP3972_OVER2_LDO2_EN BIT(2) +#define LP3972_OVER2_LDO3_EN BIT(3) +#define LP3972_OVER2_LDO4_EN BIT(4) +#define LP3972_OVER1_S_EN BIT(2) + +static const int ldo1_voltage_map[] = { + 1700, 1725, 1750, 1775, 1800, 1825, 1850, 1875, + 1900, 1925, 1950, 1975, 2000, +}; + +static const int ldo23_voltage_map[] = { + 1800, 1900, 2000, 2100, 2200, 2300, 2400, 2500, + 2600, 2700, 2800, 2900, 3000, 3100, 3200, 3300, +}; + +static const int ldo4_voltage_map[] = { + 1000, 1050, 1100, 1150, 1200, 1250, 1300, 1350, + 1400, 1500, 1800, 1900, 2500, 2800, 3000, 3300, +}; + +static const int ldo5_voltage_map[] = { + 0, 0, 0, 0, 0, 850, 875, 900, + 925, 950, 975, 1000, 1025, 1050, 1075, 1100, + 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300, + 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500, +}; + +static const int buck1_voltage_map[] = { + 725, 750, 775, 800, 825, 850, 875, 900, + 925, 950, 975, 1000, 1025, 1050, 1075, 1100, + 1125, 1150, 1175, 1200, 1225, 1250, 1275, 1300, + 1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500, +}; + +static const int buck23_voltage_map[] = { + 0, 800, 850, 900, 950, 1000, 1050, 1100, + 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, + 1550, 1600, 1650, 1700, 1800, 1900, 2500, 2800, + 3000, 3300, +}; + +static const int *ldo_voltage_map[] = { + ldo1_voltage_map, + ldo23_voltage_map, + ldo23_voltage_map, + ldo4_voltage_map, + ldo5_voltage_map, +}; + +static const int *buck_voltage_map[] = { + buck1_voltage_map, + buck23_voltage_map, + buck23_voltage_map, +}; + +static const int ldo_output_enable_mask[] = { + LP3972_OEN3_L1EN, + LP3972_OVER2_LDO2_EN, + LP3972_OVER2_LDO3_EN, + LP3972_OVER2_LDO4_EN, + LP3972_OVER1_S_EN, +}; + +static const int ldo_output_enable_addr[] = { + LP3972_OEN3_REG, + LP3972_OVER2_REG, + LP3972_OVER2_REG, + LP3972_OVER2_REG, + LP3972_OVER1_REG, +}; + +static const int ldo_vol_ctl_addr[] = { + LP3972_MDTV1_REG, + LP3972_L2VCR_REG, + LP3972_L34VCR_REG, + LP3972_L34VCR_REG, + LP3972_SDTV1_REG, +}; + +static const int buck_vol_enable_addr[] = { + LP3972_OVER1_REG, + LP3972_OEN3_REG, + LP3972_OEN3_REG, +}; + +static const int buck_base_addr[] = { + LP3972_ADTV1_REG, + LP3972_B2TV_REG, + LP3972_B3TV_REG, +}; + +#define LP3972_LDO_VOL_VALUE_MAP(x) (ldo_voltage_map[x]) +#define LP3972_LDO_OUTPUT_ENABLE_MASK(x) (ldo_output_enable_mask[x]) +#define LP3972_LDO_OUTPUT_ENABLE_REG(x) (ldo_output_enable_addr[x]) + +/* LDO voltage control registers shift: + LP3972_LDO1 -> 0, LP3972_LDO2 -> 4 + LP3972_LDO3 -> 0, LP3972_LDO4 -> 4 + LP3972_LDO5 -> 0 +*/ +#define LP3972_LDO_VOL_CONTR_SHIFT(x) (((x) & 1) << 2) +#define LP3972_LDO_VOL_CONTR_REG(x) (ldo_vol_ctl_addr[x]) +#define LP3972_LDO_VOL_CHANGE_SHIFT(x) ((x) ? 4 : 6) + +#define LP3972_LDO_VOL_MASK(x) (((x) % 4) ? 0x0f : 0x1f) +#define LP3972_LDO_VOL_MIN_IDX(x) (((x) == 4) ? 0x05 : 0x00) +#define LP3972_LDO_VOL_MAX_IDX(x) ((x) ? (((x) == 4) ? 0x1f : 0x0f) : 0x0c) + +#define LP3972_BUCK_VOL_VALUE_MAP(x) (buck_voltage_map[x]) +#define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x]) +#define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x]) +#define LP3972_BUCK_VOL_MASK 0x1f +#define LP3972_BUCK_VOL_MIN_IDX(x) ((x) ? 0x01 : 0x00) +#define LP3972_BUCK_VOL_MAX_IDX(x) ((x) ? 0x19 : 0x1f) + +static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count, + u16 *dest) +{ + int ret; + + if (count != 1) + return -EIO; + ret = i2c_smbus_read_byte_data(i2c, reg); + if (ret < 0) + return -EIO; + + *dest = ret; + return 0; +} + +static int lp3972_i2c_write(struct i2c_client *i2c, char reg, int count, + const u16 *src) +{ + if (count != 1) + return -EIO; + return i2c_smbus_write_byte_data(i2c, reg, *src); +} + +static u8 lp3972_reg_read(struct lp3972 *lp3972, u8 reg) +{ + u16 val = 0; + + mutex_lock(&lp3972->io_lock); + + lp3972_i2c_read(lp3972->i2c, reg, 1, &val); + + dev_dbg(lp3972->dev, "reg read 0x%02x -> 0x%02x\n", (int)reg, + (unsigned)val&0xff); + + mutex_unlock(&lp3972->io_lock); + + return val & 0xff; +} + +static int lp3972_set_bits(struct lp3972 *lp3972, u8 reg, u16 mask, u16 val) +{ + u16 tmp; + int ret; + + mutex_lock(&lp3972->io_lock); + + ret = lp3972_i2c_read(lp3972->i2c, reg, 1, &tmp); + tmp = (tmp & ~mask) | val; + if (ret == 0) { + ret = lp3972_i2c_write(lp3972->i2c, reg, 1, &tmp); + dev_dbg(lp3972->dev, "reg write 0x%02x -> 0x%02x\n", (int)reg, + (unsigned)val&0xff); + } + mutex_unlock(&lp3972->io_lock); + + return ret; +} + +static int lp3972_ldo_list_voltage(struct regulator_dev *dev, unsigned index) +{ + int ldo = rdev_get_id(dev) - LP3972_LDO1; + return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[index]; +} + +static int lp3972_ldo_is_enabled(struct regulator_dev *dev) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3972_LDO1; + u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo); + u16 val; + + val = lp3972_reg_read(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo)); + return !!(val & mask); +} + +static int lp3972_ldo_enable(struct regulator_dev *dev) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3972_LDO1; + u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo); + + return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo), + mask, mask); +} + +static int lp3972_ldo_disable(struct regulator_dev *dev) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3972_LDO1; + u16 mask = LP3972_LDO_OUTPUT_ENABLE_MASK(ldo); + + return lp3972_set_bits(lp3972, LP3972_LDO_OUTPUT_ENABLE_REG(ldo), + mask, 0); +} + +static int lp3972_ldo_get_voltage(struct regulator_dev *dev) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3972_LDO1; + u16 mask = LP3972_LDO_VOL_MASK(ldo); + u16 val, reg; + + reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo)); + val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask; + + return 1000 * LP3972_LDO_VOL_VALUE_MAP(ldo)[val]; +} + +static int lp3972_ldo_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int ldo = rdev_get_id(dev) - LP3972_LDO1; + int min_vol = min_uV / 1000, max_vol = max_uV / 1000; + const int *vol_map = LP3972_LDO_VOL_VALUE_MAP(ldo); + u16 val; + int shift, ret; + + if (min_vol < vol_map[LP3972_LDO_VOL_MIN_IDX(ldo)] || + min_vol > vol_map[LP3972_LDO_VOL_MAX_IDX(ldo)]) + return -EINVAL; + + for (val = LP3972_LDO_VOL_MIN_IDX(ldo); + val <= LP3972_LDO_VOL_MAX_IDX(ldo); val++) + if (vol_map[val] >= min_vol) + break; + + if (val > LP3972_LDO_VOL_MAX_IDX(ldo) || vol_map[val] > max_vol) + return -EINVAL; + + shift = LP3972_LDO_VOL_CONTR_SHIFT(ldo); + ret = lp3972_set_bits(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo), + LP3972_LDO_VOL_MASK(ldo) << shift, val << shift); + + if (ret) + return ret; + + switch (ldo) { + case LP3972_LDO1: + case LP3972_LDO5: + shift = LP3972_LDO_VOL_CHANGE_SHIFT(ldo); + ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, + LP3972_VOL_CHANGE_FLAG_MASK << shift, + LP3972_VOL_CHANGE_FLAG_GO << shift); + if (ret) + return ret; + + ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, + LP3972_VOL_CHANGE_FLAG_MASK << shift, 0); + break; + } + + return ret; +} + +static struct regulator_ops lp3972_ldo_ops = { + .list_voltage = lp3972_ldo_list_voltage, + .is_enabled = lp3972_ldo_is_enabled, + .enable = lp3972_ldo_enable, + .disable = lp3972_ldo_disable, + .get_voltage = lp3972_ldo_get_voltage, + .set_voltage = lp3972_ldo_set_voltage, +}; + +static int lp3972_dcdc_list_voltage(struct regulator_dev *dev, unsigned index) +{ + int buck = rdev_get_id(dev) - LP3972_DCDC1; + return 1000 * buck_voltage_map[buck][index]; +} + +static int lp3972_dcdc_is_enabled(struct regulator_dev *dev) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3972_DCDC1; + u16 mask = 1 << (buck * 2); + u16 val; + + val = lp3972_reg_read(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck)); + return !!(val & mask); +} + +static int lp3972_dcdc_enable(struct regulator_dev *dev) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3972_DCDC1; + u16 mask = 1 << (buck * 2); + u16 val; + + val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck), + mask, mask); + return val; +} + +static int lp3972_dcdc_disable(struct regulator_dev *dev) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3972_DCDC1; + u16 mask = 1 << (buck * 2); + u16 val; + + val = lp3972_set_bits(lp3972, LP3972_BUCK_VOL_ENABLE_REG(buck), + mask, 0); + return val; +} + +static int lp3972_dcdc_get_voltage(struct regulator_dev *dev) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3972_DCDC1; + u16 reg; + int val; + + reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck)); + reg &= LP3972_BUCK_VOL_MASK; + if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck)) + val = 1000 * buck_voltage_map[buck][reg]; + else { + val = 0; + dev_warn(&dev->dev, "chip reported incorrect voltage value.\n"); + } + + return val; +} + +static int lp3972_dcdc_set_voltage(struct regulator_dev *dev, + int min_uV, int max_uV) +{ + struct lp3972 *lp3972 = rdev_get_drvdata(dev); + int buck = rdev_get_id(dev) - LP3972_DCDC1; + int min_vol = min_uV / 1000, max_vol = max_uV / 1000; + const int *vol_map = buck_voltage_map[buck]; + u16 val; + int ret; + + if (min_vol < vol_map[LP3972_BUCK_VOL_MIN_IDX(buck)] || + min_vol > vol_map[LP3972_BUCK_VOL_MAX_IDX(buck)]) + return -EINVAL; + + for (val = LP3972_BUCK_VOL_MIN_IDX(buck); + val <= LP3972_BUCK_VOL_MAX_IDX(buck); val++) + if (vol_map[val] >= min_vol) + break; + + if (val > LP3972_BUCK_VOL_MAX_IDX(buck) || + vol_map[val] > max_vol) + return -EINVAL; + + ret = lp3972_set_bits(lp3972, LP3972_BUCK_VOL1_REG(buck), + LP3972_BUCK_VOL_MASK, val); + if (ret) + return ret; + + if (buck != 0) + return ret; + + ret = lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, + LP3972_VOL_CHANGE_FLAG_MASK, LP3972_VOL_CHANGE_FLAG_GO); + if (ret) + return ret; + + return lp3972_set_bits(lp3972, LP3972_VOL_CHANGE_REG, + LP3972_VOL_CHANGE_FLAG_MASK, 0); +} + +static struct regulator_ops lp3972_dcdc_ops = { + .list_voltage = lp3972_dcdc_list_voltage, + .is_enabled = lp3972_dcdc_is_enabled, + .enable = lp3972_dcdc_enable, + .disable = lp3972_dcdc_disable, + .get_voltage = lp3972_dcdc_get_voltage, + .set_voltage = lp3972_dcdc_set_voltage, +}; + +static struct regulator_desc regulators[] = { + { + .name = "LDO1", + .id = LP3972_LDO1, + .ops = &lp3972_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo1_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO2", + .id = LP3972_LDO2, + .ops = &lp3972_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo23_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO3", + .id = LP3972_LDO3, + .ops = &lp3972_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo23_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO4", + .id = LP3972_LDO4, + .ops = &lp3972_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo4_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "LDO5", + .id = LP3972_LDO5, + .ops = &lp3972_ldo_ops, + .n_voltages = ARRAY_SIZE(ldo5_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC1", + .id = LP3972_DCDC1, + .ops = &lp3972_dcdc_ops, + .n_voltages = ARRAY_SIZE(buck1_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC2", + .id = LP3972_DCDC2, + .ops = &lp3972_dcdc_ops, + .n_voltages = ARRAY_SIZE(buck23_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, + { + .name = "DCDC3", + .id = LP3972_DCDC3, + .ops = &lp3972_dcdc_ops, + .n_voltages = ARRAY_SIZE(buck23_voltage_map), + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, +}; + +static int setup_regulators(struct lp3972 *lp3972, + struct lp3972_platform_data *pdata) +{ + int i, err; + + lp3972->num_regulators = pdata->num_regulators; + lp3972->rdev = kcalloc(pdata->num_regulators, + sizeof(struct regulator_dev *), GFP_KERNEL); + if (!lp3972->rdev) { + err = -ENOMEM; + goto err_nomem; + } + + /* Instantiate the regulators */ + for (i = 0; i < pdata->num_regulators; i++) { + struct lp3972_regulator_subdev *reg = &pdata->regulators[i]; + lp3972->rdev[i] = regulator_register(®ulators[reg->id], + lp3972->dev, reg->initdata, lp3972); + + if (IS_ERR(lp3972->rdev[i])) { + err = PTR_ERR(lp3972->rdev[i]); + dev_err(lp3972->dev, "regulator init failed: %d\n", + err); + goto error; + } + } + + return 0; +error: + while (--i >= 0) + regulator_unregister(lp3972->rdev[i]); + kfree(lp3972->rdev); + lp3972->rdev = NULL; +err_nomem: + return err; +} + +static int __devinit lp3972_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct lp3972 *lp3972; + struct lp3972_platform_data *pdata = i2c->dev.platform_data; + int ret; + u16 val; + + if (!pdata) { + dev_dbg(&i2c->dev, "No platform init data supplied\n"); + return -ENODEV; + } + + lp3972 = kzalloc(sizeof(struct lp3972), GFP_KERNEL); + if (!lp3972) + return -ENOMEM; + + lp3972->i2c = i2c; + lp3972->dev = &i2c->dev; + + mutex_init(&lp3972->io_lock); + + /* Detect LP3972 */ + ret = lp3972_i2c_read(i2c, LP3972_SYS_CONTROL1_REG, 1, &val); + if (ret == 0 && (val & SYS_CONTROL1_INIT_MASK) != SYS_CONTROL1_INIT_VAL) + ret = -ENODEV; + if (ret < 0) { + dev_err(&i2c->dev, "failed to detect device\n"); + goto err_detect; + } + + ret = setup_regulators(lp3972, pdata); + if (ret < 0) + goto err_detect; + + i2c_set_clientdata(i2c, lp3972); + return 0; + +err_detect: + kfree(lp3972); + return ret; +} + +static int __devexit lp3972_i2c_remove(struct i2c_client *i2c) +{ + struct lp3972 *lp3972 = i2c_get_clientdata(i2c); + int i; + + for (i = 0; i < lp3972->num_regulators; i++) + regulator_unregister(lp3972->rdev[i]); + kfree(lp3972->rdev); + kfree(lp3972); + + return 0; +} + +static const struct i2c_device_id lp3972_i2c_id[] = { + { "lp3972", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lp3972_i2c_id); + +static struct i2c_driver lp3972_i2c_driver = { + .driver = { + .name = "lp3972", + .owner = THIS_MODULE, + }, + .probe = lp3972_i2c_probe, + .remove = __devexit_p(lp3972_i2c_remove), + .id_table = lp3972_i2c_id, +}; + +static int __init lp3972_module_init(void) +{ + return i2c_add_driver(&lp3972_i2c_driver); +} +subsys_initcall(lp3972_module_init); + +static void __exit lp3972_module_exit(void) +{ + i2c_del_driver(&lp3972_i2c_driver); +} +module_exit(lp3972_module_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Axel Lin "); +MODULE_DESCRIPTION("LP3972 PMIC driver"); diff --git a/include/linux/regulator/lp3972.h b/include/linux/regulator/lp3972.h new file mode 100644 index 000000000000..9bb7389b7a1e --- /dev/null +++ b/include/linux/regulator/lp3972.h @@ -0,0 +1,48 @@ +/* + * National Semiconductors LP3972 PMIC chip client interface + * + * Based on lp3971.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __LINUX_REGULATOR_LP3972_H +#define __LINUX_REGULATOR_LP3972_H + +#include + +#define LP3972_LDO1 0 +#define LP3972_LDO2 1 +#define LP3972_LDO3 2 +#define LP3972_LDO4 3 +#define LP3972_LDO5 4 + +#define LP3972_DCDC1 5 +#define LP3972_DCDC2 6 +#define LP3972_DCDC3 7 + +#define LP3972_NUM_REGULATORS 8 + +struct lp3972_regulator_subdev { + int id; + struct regulator_init_data *initdata; +}; + +struct lp3972_platform_data { + int num_regulators; + struct lp3972_regulator_subdev *regulators; +}; + +#endif