From: Zebediah C. McClure Date: Tue, 24 Mar 2009 01:07:45 +0000 (-0700) Subject: [OMAP850] IRQ related changes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=59185eeeaad1f07fc930c1878f3773484219e3da;p=openwrt%2Fstaging%2Fblogic.git [OMAP850] IRQ related changes IRQ related changes. Signed-off-by: Zebediah C. McClure Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 9ad5197075ff..de03c8448994 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -145,6 +145,14 @@ static struct omap_irq_bank omap730_irq_banks[] = { }; #endif +#ifdef CONFIG_ARCH_OMAP850 +static struct omap_irq_bank omap850_irq_banks[] = { + { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, + { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, + { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, +}; +#endif + #ifdef CONFIG_ARCH_OMAP15XX static struct omap_irq_bank omap1510_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3febfff }, @@ -184,6 +192,12 @@ void __init omap_init_irq(void) irq_bank_count = ARRAY_SIZE(omap730_irq_banks); } #endif +#ifdef CONFIG_ARCH_OMAP850 + if (cpu_is_omap850()) { + irq_banks = omap850_irq_banks; + irq_bank_count = ARRAY_SIZE(omap850_irq_banks); + } +#endif #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap1510()) { irq_banks = omap1510_irq_banks; @@ -214,9 +228,8 @@ void __init omap_init_irq(void) irq_bank_writel(0x03, 1, IRQ_CONTROL_REG_OFFSET); /* Enable interrupts in global mask */ - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) irq_bank_writel(0x0, 0, IRQ_GMR_REG_OFFSET); - } /* Install the interrupt handlers for each bank */ for (i = 0; i < irq_bank_count; i++) { @@ -236,6 +249,8 @@ void __init omap_init_irq(void) if (cpu_is_omap730()) omap_unmask_irq(INT_730_IH2_IRQ); + else if (cpu_is_omap850()) + omap_unmask_irq(INT_850_IH2_IRQ); else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index bed5274c910a..7f57ee66f364 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -104,6 +104,29 @@ #define INT_730_GPIO_BANK6 18 #define INT_730_SPGIO_WR 29 +/* + * OMAP-850 specific IRQ numbers for interrupt handler 1 + */ +#define INT_850_IH2_FIQ 0 +#define INT_850_IH2_IRQ 1 +#define INT_850_USB_NON_ISO 2 +#define INT_850_USB_ISO 3 +#define INT_850_ICR 4 +#define INT_850_EAC 5 +#define INT_850_GPIO_BANK1 6 +#define INT_850_GPIO_BANK2 7 +#define INT_850_GPIO_BANK3 8 +#define INT_850_McBSP2TX 10 +#define INT_850_McBSP2RX 11 +#define INT_850_McBSP2RX_OVF 12 +#define INT_850_LCD_LINE 14 +#define INT_850_GSM_PROTECT 15 +#define INT_850_TIMER3 16 +#define INT_850_GPIO_BANK5 17 +#define INT_850_GPIO_BANK6 18 +#define INT_850_SPGIO_WR 29 + + /* * IRQ numbers for interrupt handler 2 * @@ -237,6 +260,64 @@ #define INT_730_DMA_CH15 (62 + IH2_BASE) #define INT_730_NAND (63 + IH2_BASE) +/* + * OMAP-850 specific IRQ numbers for interrupt handler 2 + */ +#define INT_850_HW_ERRORS (0 + IH2_BASE) +#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_850_CFCD (2 + IH2_BASE) +#define INT_850_CFIREQ (3 + IH2_BASE) +#define INT_850_I2C (4 + IH2_BASE) +#define INT_850_PCC (5 + IH2_BASE) +#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_850_SPI_100K_1 (7 + IH2_BASE) +#define INT_850_SYREN_SPI (8 + IH2_BASE) +#define INT_850_VLYNQ (9 + IH2_BASE) +#define INT_850_GPIO_BANK4 (10 + IH2_BASE) +#define INT_850_McBSP1TX (11 + IH2_BASE) +#define INT_850_McBSP1RX (12 + IH2_BASE) +#define INT_850_McBSP1RX_OF (13 + IH2_BASE) +#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_850_UART_MODEM_1 (15 + IH2_BASE) +#define INT_850_MCSI (16 + IH2_BASE) +#define INT_850_uWireTX (17 + IH2_BASE) +#define INT_850_uWireRX (18 + IH2_BASE) +#define INT_850_SMC_CD (19 + IH2_BASE) +#define INT_850_SMC_IREQ (20 + IH2_BASE) +#define INT_850_HDQ_1WIRE (21 + IH2_BASE) +#define INT_850_TIMER32K (22 + IH2_BASE) +#define INT_850_MMC_SDIO (23 + IH2_BASE) +#define INT_850_UPLD (24 + IH2_BASE) +#define INT_850_USB_HHC_1 (27 + IH2_BASE) +#define INT_850_USB_HHC_2 (28 + IH2_BASE) +#define INT_850_USB_GENI (29 + IH2_BASE) +#define INT_850_USB_OTG (30 + IH2_BASE) +#define INT_850_CAMERA_IF (31 + IH2_BASE) +#define INT_850_RNG (32 + IH2_BASE) +#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_850_DBB_RF_EN (34 + IH2_BASE) +#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_850_SHA1_MD5 (36 + IH2_BASE) +#define INT_850_SPI_100K_2 (37 + IH2_BASE) +#define INT_850_RNG_IDLE (38 + IH2_BASE) +#define INT_850_MPUIO (39 + IH2_BASE) +#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_850_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_850_LLPC_VSYNC (43 + IH2_BASE) +#define INT_850_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_850_DMA_CH6 (53 + IH2_BASE) +#define INT_850_DMA_CH7 (54 + IH2_BASE) +#define INT_850_DMA_CH8 (55 + IH2_BASE) +#define INT_850_DMA_CH9 (56 + IH2_BASE) +#define INT_850_DMA_CH10 (57 + IH2_BASE) +#define INT_850_DMA_CH11 (58 + IH2_BASE) +#define INT_850_DMA_CH12 (59 + IH2_BASE) +#define INT_850_DMA_CH13 (60 + IH2_BASE) +#define INT_850_DMA_CH14 (61 + IH2_BASE) +#define INT_850_DMA_CH15 (62 + IH2_BASE) +#define INT_850_NAND (63 + IH2_BASE) + #define INT_24XX_SYS_NIRQ 7 #define INT_24XX_SDMA_IRQ0 12 #define INT_24XX_SDMA_IRQ1 13 @@ -341,7 +422,7 @@ #define INT_34XX_BENCH_MPU_EMUL 3 -/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and +/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and * 16 MPUIO lines */ #define OMAP_MAX_GPIO_LINES 192 #define IH_GPIO_BASE (128 + IH2_BASE)