From: Brian Norris Date: Wed, 9 Apr 2014 02:16:49 +0000 (-0700) Subject: mtd: spi-nor: unify read opcode variants with ST SPI FSM X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=58b89a1f4c2a65b10b8f7b90b6ff2161b19bb0d1;p=openwrt%2Fstaging%2Fblogic.git mtd: spi-nor: unify read opcode variants with ST SPI FSM serial_flash_cmds.h defines our opcodes a little differently. Let's borrow its naming, since it's borrowed from the SFDP standard, and it's more extensible. This prepares us for merging serial_flash_cmds.h and spi-nor.h opcode listing. Signed-off-by: Brian Norris Reviewed-by: Marek Vasut Acked-by: Huang Shijie --- diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 2977f026f39d..b41bbbc531ff 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -294,12 +294,12 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) lut_base = SEQID_QUAD_READ * 4; if (q->nor_size <= SZ_16M) { - cmd = SPINOR_OP_QUAD_READ; + cmd = SPINOR_OP_READ_1_1_4; addrlen = ADDR24BIT; dummy = 8; } else { /* use the 4-byte address */ - cmd = SPINOR_OP_QUAD_READ; + cmd = SPINOR_OP_READ_1_1_4; addrlen = ADDR32BIT; dummy = 8; } @@ -388,7 +388,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) { switch (cmd) { - case SPINOR_OP_QUAD_READ: + case SPINOR_OP_READ_1_1_4: return SEQID_QUAD_READ; case SPINOR_OP_WREN: return SEQID_WREN; diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index 1716f3ce9949..d6f44d527701 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -1014,16 +1014,16 @@ int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id, /* Default commands */ switch (nor->flash_read) { case SPI_NOR_QUAD: - nor->read_opcode = SPINOR_OP_QUAD_READ; + nor->read_opcode = SPINOR_OP_READ_1_1_4; break; case SPI_NOR_DUAL: - nor->read_opcode = SPINOR_OP_DUAL_READ; + nor->read_opcode = SPINOR_OP_READ_1_1_2; break; case SPI_NOR_FAST: - nor->read_opcode = SPINOR_OP_FAST_READ; + nor->read_opcode = SPINOR_OP_READ_FAST; break; case SPI_NOR_NORMAL: - nor->read_opcode = SPINOR_OP_NORM_READ; + nor->read_opcode = SPINOR_OP_READ; break; default: dev_err(dev, "No Read opcode defined\n"); @@ -1041,16 +1041,16 @@ int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id, /* Dedicated 4-byte command set */ switch (nor->flash_read) { case SPI_NOR_QUAD: - nor->read_opcode = SPINOR_OP_QUAD_READ_4B; + nor->read_opcode = SPINOR_OP_READ4_1_1_4; break; case SPI_NOR_DUAL: - nor->read_opcode = SPINOR_OP_DUAL_READ_4B; + nor->read_opcode = SPINOR_OP_READ4_1_1_2; break; case SPI_NOR_FAST: - nor->read_opcode = SPINOR_OP_FAST_READ_4B; + nor->read_opcode = SPINOR_OP_READ4_FAST; break; case SPI_NOR_NORMAL: - nor->read_opcode = SPINOR_OP_NORM_READ_4B; + nor->read_opcode = SPINOR_OP_READ4; break; } nor->program_opcode = SPINOR_OP_PP_4B; diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index f1fe1a6659a3..53241842a7ab 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -10,14 +10,22 @@ #ifndef __LINUX_MTD_SPI_NOR_H #define __LINUX_MTD_SPI_NOR_H +/* + * Note on opcode nomenclature: some opcodes have a format like + * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number + * of I/O lines used for the opcode, address, and data (respectively). The + * FUNCTION has an optional suffix of '4', to represent an opcode which + * requires a 4-byte (32-bit) address. + */ + /* Flash opcodes. */ #define SPINOR_OP_WREN 0x06 /* Write enable */ #define SPINOR_OP_RDSR 0x05 /* Read status register */ #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ -#define SPINOR_OP_NORM_READ 0x03 /* Read data bytes (low frequency) */ -#define SPINOR_OP_FAST_READ 0x0b /* Read data bytes (high frequency) */ -#define SPINOR_OP_DUAL_READ 0x3b /* Read data bytes (Dual SPI) */ -#define SPINOR_OP_QUAD_READ 0x6b /* Read data bytes (Quad SPI) */ +#define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */ +#define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */ +#define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */ +#define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */ #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */ #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */ #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ @@ -28,10 +36,10 @@ #define SPINOR_OP_RDCR 0x35 /* Read configuration register */ /* 4-byte address opcodes - used on Spansion and some Macronix flashes. */ -#define SPINOR_OP_NORM_READ_4B 0x13 /* Read data bytes (low frequency) */ -#define SPINOR_OP_FAST_READ_4B 0x0c /* Read data bytes (high frequency) */ -#define SPINOR_OP_DUAL_READ_4B 0x3c /* Read data bytes (Dual SPI) */ -#define SPINOR_OP_QUAD_READ_4B 0x6c /* Read data bytes (Quad SPI) */ +#define SPINOR_OP_READ4 0x13 /* Read data bytes (low frequency) */ +#define SPINOR_OP_READ4_FAST 0x0c /* Read data bytes (high frequency) */ +#define SPINOR_OP_READ4_1_1_2 0x3c /* Read data bytes (Dual SPI) */ +#define SPINOR_OP_READ4_1_1_4 0x6c /* Read data bytes (Quad SPI) */ #define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */ #define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */