From: Benjamin Herrenschmidt Date: Wed, 22 Nov 2006 23:46:38 +0000 (+0100) Subject: [POWERPC] cell: hard disable interrupts in power_save() X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5850dd8f6d4e79484d498c0d77b223d1041f9954;p=openwrt%2Fstaging%2Fblogic.git [POWERPC] cell: hard disable interrupts in power_save() With soft-disabled interrupts in power_save, we can still get external exceptions on Cell, even if we are in pause(0) a.k.a. sleep state. When the CPU really wakes up through the 0x100 (system reset) vector, while we have already started processing the 0x500 (external) exception, we get a panic in unrecoverable_exception() because of the lost state. This occurred in Systemsim for Cell, but as far as I can see, it can theoretically occur on any machine that uses the system reset exception to get out of sleep state. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Arnd Bergmann --- diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index c68fabdc7874..8c20f0fb8651 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -41,6 +41,15 @@ static void cbe_power_save(void) { unsigned long ctrl, thread_switch_control; + + /* + * We need to hard disable interrupts, but we also need to mark them + * hard disabled in the PACA so that the local_irq_enable() done by + * our caller upon return propertly hard enables. + */ + hard_irq_disable(); + get_paca()->hard_enabled = 0; + ctrl = mfspr(SPRN_CTRLF); /* Enable DEC and EE interrupt request */