From: Shiji Yang Date: Tue, 29 Nov 2022 10:13:19 +0000 (+0800) Subject: ath79: convert Netgear R6100 radio calibration to nvmem-cells X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=58088ff457afff5fcfa4b32f00c44593f4b7b2c1;p=openwrt%2Fstaging%2Fansuel.git ath79: convert Netgear R6100 radio calibration to nvmem-cells use nvmem-cells implementation to avoid copying art calibration data to rootfs. Tested on Netgear R6100 Signed-off-by: Shiji Yang --- diff --git a/target/linux/ath79/dts/ar9344_netgear_r6100.dts b/target/linux/ath79/dts/ar9344_netgear_r6100.dts index a73ea52de9..76bd77d4c6 100644 --- a/target/linux/ath79/dts/ar9344_netgear_r6100.dts +++ b/target/linux/ath79/dts/ar9344_netgear_r6100.dts @@ -181,8 +181,8 @@ compatible = "qcom,ath10k"; reg = <0x0000 0 0 0 0>; - nvmem-cells = <&macaddr_caldata_c>; - nvmem-cell-names = "mac-address"; + nvmem-cells = <&cal_ath10k>, <&macaddr_caldata_c>; + nvmem-cell-names = "calibration", "mac-address"; }; }; @@ -201,7 +201,8 @@ &wmac { status = "okay"; - mtd-cal-data = <&caldata 0x1000>; + nvmem-cells = <&cal_ath9k>; + nvmem-cell-names = "calibration"; }; &caldata { @@ -209,6 +210,14 @@ #address-cells = <1>; #size-cells = <1>; + cal_ath9k: calibration@1000 { + reg = <0x1000 0x440>; + }; + + cal_ath10k: calibration@5000 { + reg = <0x5000 0x844>; + }; + macaddr_caldata_0: macaddr@0 { reg = <0x0 0x6>; }; diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index e5c26d6bb5..d26625981e 100644 --- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -18,9 +18,6 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) 1) ;; - netgear,r6100) - caldata_extract "caldata" 0x5000 0x844 - ;; zyxel,emg2926-q10a|\ zyxel,nbg6716) caldata_extract "art" 0x5000 0x844