From: Jes Sorensen Date: Thu, 7 Apr 2016 18:19:27 +0000 (-0400) Subject: rtl8xxxu: Set correct interrupt masking registers on 8192eu X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=57e5e2e650fb7ad1fe32e1c5e5b1bd01faa238fc;p=openwrt%2Fstaging%2Fblogic.git rtl8xxxu: Set correct interrupt masking registers on 8192eu Set HIMR[01] on 8192eu instead of HISR/HIMR. It's not obvious this really matters for USB devices, but this matches the register writes performed by the vendor driver. Signed-off-by: Jes Sorensen Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index e77019256c61..bcf229d2055b 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -6883,11 +6883,6 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) rtl8xxxu_write8(priv, 0xfe42, 0x80); } - if (priv->rtl_chip == RTL8192E) { - rtl8xxxu_write32(priv, REG_HIMR0, 0x00); - rtl8xxxu_write32(priv, REG_HIMR1, 0x00); - } - if (priv->fops->phy_init_antenna_selection) priv->fops->phy_init_antenna_selection(priv); @@ -7053,11 +7048,16 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) */ rtl8xxxu_write8(priv, REG_RX_DRVINFO_SZ, 4); - /* - * Enable all interrupts - not obvious USB needs to do this - */ - rtl8xxxu_write32(priv, REG_HISR, 0xffffffff); - rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff); + if (priv->rtl_chip == RTL8192E) { + rtl8xxxu_write32(priv, REG_HIMR0, 0x00); + rtl8xxxu_write32(priv, REG_HIMR1, 0x00); + } else { + /* + * Enable all interrupts - not obvious USB needs to do this + */ + rtl8xxxu_write32(priv, REG_HISR, 0xffffffff); + rtl8xxxu_write32(priv, REG_HIMR, 0xffffffff); + } rtl8xxxu_set_mac(priv); rtl8xxxu_set_linktype(priv, NL80211_IFTYPE_STATION);