From: Adrian Schmutzler Date: Fri, 14 Aug 2020 14:31:40 +0000 (+0200) Subject: ipq806x: move further common nodes to the DTSI files X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=57e029ba573bb6b4e19c90d55960bed0357c321b;p=openwrt%2Fstaging%2Fneocturne.git ipq806x: move further common nodes to the DTSI files The moves a few additional common nodes to the common DTSI files for qcom-ipq8064-v2.0 and qcom-ipq8065 devices. Remove a few redundant definitions on the way. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index a23f3da469..a28927cde7 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -28,13 +28,6 @@ status = "okay"; }; -/* -* The i2c device on gsbi4 should not be enabled. -* On ipq806x designs gsbi4 i2c is meant for exclusive -* RPM usage. Turning this on in kernel manifests as -* i2c failure for the RPM. -*/ - &flash { partitions { compatible = "qcom,smem"; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts index 59c06dbccc..f86f61f5ca 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts @@ -36,13 +36,6 @@ }; }; -/* -* The i2c device on gsbi4 should not be enabled. -* On ipq806x designs gsbi4 i2c is meant for exclusive -* RPM usage. Turning this on in kernel manifests as -* i2c failure for the RPM. -*/ - &flash { partitions { compatible = "qcom,smem"; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts index c6d7da3917..1f2cd247b6 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts @@ -11,16 +11,6 @@ device_type = "memory"; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - aliases { mdio-gpio0 = &mdio0; @@ -175,20 +165,6 @@ }; }; -&gsbi4 { - qcom,mode = ; - status = "okay"; - serial@16340000 { - status = "okay"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ -}; - &gsbi5 { qcom,mode = ; status = "okay"; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts index 5bd195955a..dc25a42403 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts @@ -11,16 +11,6 @@ device_type = "memory"; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - aliases { mdio-gpio0 = &mdio0; @@ -152,26 +142,11 @@ }; }; -&gsbi4 { - qcom,mode = ; - status = "okay"; - serial@16340000 { - status = "okay"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ -}; - &sata_phy { status = "okay"; }; &sata { - ports-implemented = <0x1>; status = "okay"; }; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts index 6454fae7f7..8001b17e81 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts @@ -12,19 +12,7 @@ device_type = "memory"; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - aliases { - serial0 = &gsbi4_serial; - led-boot = &led_power; led-failsafe = &led_power; led-running = &led_power; @@ -33,7 +21,7 @@ chosen { bootargs = "console=ttyMSM0,115200n8"; - stdout-path = "serial0:115200n8"; + append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */ find-rootblock = "ubi.mtd="; /* look for root deviceblock nbr in this bootarg */ }; @@ -89,20 +77,6 @@ }; }; -&gsbi4 { - qcom,mode = ; - status = "okay"; - serial@16340000 { - status = "okay"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ -}; - &usb3_0 { status = "okay"; }; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts index 7110f8943a..9c5d163919 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts @@ -11,16 +11,6 @@ device_type = "memory"; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - aliases { mdio-gpio0 = &mdio0; @@ -102,20 +92,6 @@ }; }; -&gsbi4 { - qcom,mode = ; - status = "okay"; - serial@16340000 { - status = "okay"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ -}; - &sata_phy { status = "okay"; }; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts index c1fb3b5534..868d1e9a9a 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts @@ -133,13 +133,6 @@ }; }; -/* -* The i2c device on gsbi4 should not be enabled. -* On ipq806x designs gsbi4 i2c is meant for exclusive -* RPM usage. Turning this on in kernel manifests as -* i2c failure for the RPM. -*/ - &gsbi5 { status = "disabled"; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts index 015de3d2b1..8cb6376ee7 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts @@ -12,14 +12,6 @@ }; reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - rsvd@5fe00000 { reg = <0x5fe00000 0x200000>; reusable; @@ -161,20 +153,6 @@ }; }; -&gsbi4 { - qcom,mode = ; - status = "okay"; - serial@16340000 { - status = "okay"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ -}; - &sata_phy { status = "okay"; }; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi index c0bcee783d..350965200b 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi @@ -8,6 +8,32 @@ chosen { stdout-path = "serial0:115200n8"; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; +}; + +&gsbi4 { + qcom,mode = ; + status = "okay"; + + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ }; &CPU_SPC { diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts index 5de089eab4..8cc69bca88 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts @@ -11,16 +11,6 @@ device_type = "memory"; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - aliases { mdio-gpio0 = &mdio0; @@ -164,20 +154,6 @@ }; }; -&gsbi4 { - qcom,mode = ; - status = "okay"; - serial@16340000 { - status = "okay"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ -}; - &gsbi5 { qcom,mode = ; status = "okay"; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts index f8a0d07016..322968dfdb 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts @@ -11,16 +11,6 @@ device_type = "memory"; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - aliases { mdio-gpio0 = &mdio0; @@ -187,15 +177,6 @@ }; }; -&gsbi4 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi4_serial { - status = "okay"; -}; - &gsbi5 { status = "okay"; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts index 557ea61452..812757131a 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts @@ -12,16 +12,6 @@ device_type = "memory"; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - aliases { led-boot = &power; led-failsafe = &diag; @@ -245,14 +235,7 @@ }; }; -&gsbi4 { - status = "okay"; - qcom,mode = ; -}; - &gsbi4_serial { - status = "okay"; - pinctrl-0 = <&uart0_pins>; pinctrl-names = "default"; }; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts index 02cb4dc7e8..dab5c4ccd5 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts @@ -11,16 +11,6 @@ device_type = "memory"; }; - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - aliases { mdio-gpio0 = &mdio0; sdcc1 = &sdcc1; @@ -172,20 +162,6 @@ }; }; -&gsbi4 { - qcom,mode = ; - status = "okay"; - serial@16340000 { - status = "okay"; - }; - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ -}; - &gsbi5 { qcom,mode = ; status = "okay"; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts index f7cc8643f1..7b272b74ca 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts @@ -12,14 +12,6 @@ }; reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - rsvd@5fe00000 { reg = <0x5fe00000 0x200000>; reusable; @@ -234,22 +226,6 @@ }; }; -&gsbi4 { - qcom,mode = ; - status = "okay"; - - serial@16340000 { - status = "okay"; - }; - - /* - * The i2c device on gsbi4 should not be enabled. - * On ipq806x designs gsbi4 i2c is meant for exclusive - * RPM usage. Turning this on in kernel manifests as - * i2c failure for the RPM. - */ -}; - &nand_controller { status = "okay"; @@ -416,7 +392,6 @@ }; &sata { - ports-implemented = <0x1>; status = "okay"; }; diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi index 0a58c97095..b706bfa3a7 100644 --- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi +++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi @@ -17,6 +17,32 @@ qcom,l2-cpufreq = <384000000 600000000 1400000000>; }; }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rsvd@41200000 { + reg = <0x41200000 0x300000>; + no-map; + }; + }; +}; + +&gsbi4 { + qcom,mode = ; + status = "okay"; + + serial@16340000 { + status = "okay"; + }; + /* + * The i2c device on gsbi4 should not be enabled. + * On ipq806x designs gsbi4 i2c is meant for exclusive + * RPM usage. Turning this on in kernel manifests as + * i2c failure for the RPM. + */ }; &pcie0 {