From: Mauro Carvalho Chehab Date: Sun, 28 Apr 2013 14:47:48 +0000 (-0300) Subject: [media] drxk_hard.h: Remove some alien comment markups X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=57b8b0035725db6b1a4f7bb815b3dc244942b04d;p=openwrt%2Fstaging%2Fblogic.git [media] drxk_hard.h: Remove some alien comment markups X-Patchwork-Delegate: mchehab@redhat.com The comments markup language used on Kernel is defined at: Documentation/kernel-doc-nano-HOWTO.txt Remove invalid markups from the header file. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb-frontends/drxk_hard.h b/drivers/media/dvb-frontends/drxk_hard.h index db87a6d75720..e77d9f098c93 100644 --- a/drivers/media/dvb-frontends/drxk_hard.h +++ b/drivers/media/dvb-frontends/drxk_hard.h @@ -77,17 +77,17 @@ enum drx_power_mode { }; -/** /brief Intermediate power mode for DRXK, power down OFDM clock domain */ +/* Intermediate power mode for DRXK, power down OFDM clock domain */ #ifndef DRXK_POWER_DOWN_OFDM #define DRXK_POWER_DOWN_OFDM DRX_POWER_MODE_1 #endif -/** /brief Intermediate power mode for DRXK, power down core (sysclk) */ +/* Intermediate power mode for DRXK, power down core (sysclk) */ #ifndef DRXK_POWER_DOWN_CORE #define DRXK_POWER_DOWN_CORE DRX_POWER_MODE_9 #endif -/** /brief Intermediate power mode for DRXK, power down pll (only osc runs) */ +/* Intermediate power mode for DRXK, power down pll (only osc runs) */ #ifndef DRXK_POWER_DOWN_PLL #define DRXK_POWER_DOWN_PLL DRX_POWER_MODE_10 #endif @@ -193,13 +193,13 @@ struct s_cfg_pre_saw { }; struct drxk_ofdm_sc_cmd_t { - u16 cmd; /**< Command number */ - u16 subcmd; /**< Sub-command parameter*/ - u16 param0; /**< General purpous param */ - u16 param1; /**< General purpous param */ - u16 param2; /**< General purpous param */ - u16 param3; /**< General purpous param */ - u16 param4; /**< General purpous param */ + u16 cmd; /* Command number */ + u16 subcmd; /* Sub-command parameter*/ + u16 param0; /* General purpous param */ + u16 param1; /* General purpous param */ + u16 param2; /* General purpous param */ + u16 param3; /* General purpous param */ + u16 param4; /* General purpous param */ }; struct drxk_state { @@ -213,7 +213,7 @@ struct drxk_state { struct mutex mutex; - u32 m_instance; /**< Channel 1,2,3 or 4 */ + u32 m_instance; /* Channel 1,2,3 or 4 */ int m_chunk_size; u8 chunk[256]; @@ -234,33 +234,33 @@ struct drxk_state { u16 m_hi_cfg_wake_up_key; u16 m_hi_cfg_timeout; u16 m_hi_cfg_ctrl; - s32 m_sys_clock_freq; /**< system clock frequency in kHz */ - - enum e_drxk_state m_drxk_state; /**< State of Drxk (init,stopped,started) */ - enum operation_mode m_operation_mode; /**< digital standards */ - struct s_cfg_agc m_vsb_rf_agc_cfg; /**< settings for VSB RF-AGC */ - struct s_cfg_agc m_vsb_if_agc_cfg; /**< settings for VSB IF-AGC */ - u16 m_vsb_pga_cfg; /**< settings for VSB PGA */ - struct s_cfg_pre_saw m_vsb_pre_saw_cfg; /**< settings for pre SAW sense */ - s32 m_Quality83percent; /**< MER level (*0.1 dB) for 83% quality indication */ - s32 m_Quality93percent; /**< MER level (*0.1 dB) for 93% quality indication */ + s32 m_sys_clock_freq; /* system clock frequency in kHz */ + + enum e_drxk_state m_drxk_state; /* State of Drxk (init,stopped,started) */ + enum operation_mode m_operation_mode; /* digital standards */ + struct s_cfg_agc m_vsb_rf_agc_cfg; /* settings for VSB RF-AGC */ + struct s_cfg_agc m_vsb_if_agc_cfg; /* settings for VSB IF-AGC */ + u16 m_vsb_pga_cfg; /* settings for VSB PGA */ + struct s_cfg_pre_saw m_vsb_pre_saw_cfg; /* settings for pre SAW sense */ + s32 m_Quality83percent; /* MER level (*0.1 dB) for 83% quality indication */ + s32 m_Quality93percent; /* MER level (*0.1 dB) for 93% quality indication */ bool m_smart_ant_inverted; bool m_b_debug_enable_bridge; - bool m_b_p_down_open_bridge; /**< only open DRXK bridge before power-down once it has been accessed */ - bool m_b_power_down; /**< Power down when not used */ - - u32 m_iqm_fs_rate_ofs; /**< frequency shift as written to DRXK register (28bit fixpoint) */ - - bool m_enable_mpeg_output; /**< If TRUE, enable MPEG output */ - bool m_insert_rs_byte; /**< If TRUE, insert RS byte */ - bool m_enable_parallel; /**< If TRUE, parallel out otherwise serial */ - bool m_invert_data; /**< If TRUE, invert DATA signals */ - bool m_invert_err; /**< If TRUE, invert ERR signal */ - bool m_invert_str; /**< If TRUE, invert STR signals */ - bool m_invert_val; /**< If TRUE, invert VAL signals */ - bool m_invert_clk; /**< If TRUE, invert CLK signals */ + bool m_b_p_down_open_bridge; /* only open DRXK bridge before power-down once it has been accessed */ + bool m_b_power_down; /* Power down when not used */ + + u32 m_iqm_fs_rate_ofs; /* frequency shift as written to DRXK register (28bit fixpoint) */ + + bool m_enable_mpeg_output; /* If TRUE, enable MPEG output */ + bool m_insert_rs_byte; /* If TRUE, insert RS byte */ + bool m_enable_parallel; /* If TRUE, parallel out otherwise serial */ + bool m_invert_data; /* If TRUE, invert DATA signals */ + bool m_invert_err; /* If TRUE, invert ERR signal */ + bool m_invert_str; /* If TRUE, invert STR signals */ + bool m_invert_val; /* If TRUE, invert VAL signals */ + bool m_invert_clk; /* If TRUE, invert CLK signals */ bool m_dvbc_static_clk; - bool m_dvbt_static_clk; /**< If TRUE, static MPEG clockrate will + bool m_dvbt_static_clk; /* If TRUE, static MPEG clockrate will be used, otherwise clockrate will adapt to the bitrate of the TS */ u32 m_dvbt_bitrate; @@ -271,22 +271,22 @@ struct drxk_state { bool m_itut_annex_c; /* If true, uses ITU-T DVB-C Annex C, instead of Annex A */ - enum drxmpeg_str_width_t m_width_str; /**< MPEG start width */ - u32 m_mpeg_ts_static_bitrate; /**< Maximum bitrate in b/s in case + enum drxmpeg_str_width_t m_width_str; /* MPEG start width */ + u32 m_mpeg_ts_static_bitrate; /* Maximum bitrate in b/s in case static clockrate is selected */ - /* LARGE_INTEGER m_startTime; */ /**< Contains the time of the last demod start */ - s32 m_mpeg_lock_time_out; /**< WaitForLockStatus Timeout (counts from start time) */ - s32 m_demod_lock_time_out; /**< WaitForLockStatus Timeout (counts from start time) */ + /* LARGE_INTEGER m_startTime; */ /* Contains the time of the last demod start */ + s32 m_mpeg_lock_time_out; /* WaitForLockStatus Timeout (counts from start time) */ + s32 m_demod_lock_time_out; /* WaitForLockStatus Timeout (counts from start time) */ bool m_disable_te_ihandling; bool m_rf_agc_pol; bool m_if_agc_pol; - struct s_cfg_agc m_atv_rf_agc_cfg; /**< settings for ATV RF-AGC */ - struct s_cfg_agc m_atv_if_agc_cfg; /**< settings for ATV IF-AGC */ - struct s_cfg_pre_saw m_atv_pre_saw_cfg; /**< settings for ATV pre SAW sense */ + struct s_cfg_agc m_atv_rf_agc_cfg; /* settings for ATV RF-AGC */ + struct s_cfg_agc m_atv_if_agc_cfg; /* settings for ATV IF-AGC */ + struct s_cfg_pre_saw m_atv_pre_saw_cfg; /* settings for ATV pre SAW sense */ bool m_phase_correction_bypass; s16 m_atv_top_vid_peak; u16 m_atv_top_noise_th; @@ -294,13 +294,13 @@ struct drxk_state { bool m_enable_cvbs_output; bool m_enable_sif_output; bool m_b_mirror_freq_spect; - enum e_drxk_constellation m_constellation; /**< constellation type of the channel */ - u32 m_curr_symbol_rate; /**< Current QAM symbol rate */ - struct s_cfg_agc m_qam_rf_agc_cfg; /**< settings for QAM RF-AGC */ - struct s_cfg_agc m_qam_if_agc_cfg; /**< settings for QAM IF-AGC */ - u16 m_qam_pga_cfg; /**< settings for QAM PGA */ - struct s_cfg_pre_saw m_qam_pre_saw_cfg; /**< settings for QAM pre SAW sense */ - enum e_drxk_interleave_mode m_qam_interleave_mode; /**< QAM Interleave mode */ + enum e_drxk_constellation m_constellation; /* constellation type of the channel */ + u32 m_curr_symbol_rate; /* Current QAM symbol rate */ + struct s_cfg_agc m_qam_rf_agc_cfg; /* settings for QAM RF-AGC */ + struct s_cfg_agc m_qam_if_agc_cfg; /* settings for QAM IF-AGC */ + u16 m_qam_pga_cfg; /* settings for QAM PGA */ + struct s_cfg_pre_saw m_qam_pre_saw_cfg; /* settings for QAM pre SAW sense */ + enum e_drxk_interleave_mode m_qam_interleave_mode; /* QAM Interleave mode */ u16 m_fec_rs_plen; u16 m_fec_rs_prescale; @@ -309,9 +309,9 @@ struct drxk_state { u16 m_gpio; u16 m_gpio_cfg; - struct s_cfg_agc m_dvbt_rf_agc_cfg; /**< settings for QAM RF-AGC */ - struct s_cfg_agc m_dvbt_if_agc_cfg; /**< settings for QAM IF-AGC */ - struct s_cfg_pre_saw m_dvbt_pre_saw_cfg; /**< settings for QAM pre SAW sense */ + struct s_cfg_agc m_dvbt_rf_agc_cfg; /* settings for QAM RF-AGC */ + struct s_cfg_agc m_dvbt_if_agc_cfg; /* settings for QAM IF-AGC */ + struct s_cfg_pre_saw m_dvbt_pre_saw_cfg; /* settings for QAM pre SAW sense */ u16 m_agcfast_clip_ctrl_delay; bool m_adc_comp_passed;