From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 13 Mar 2012 07:56:01 +0000 (+0000)
Subject: ath9k: remove stuck beacon detection optimization, it may be unreliable on some hardware
X-Git-Tag: reboot~14571
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=57b4047a5d9aeaa42bea28074664a350acad3d07;p=openwrt%2Fstaging%2Fjogo.git

ath9k: remove stuck beacon detection optimization, it may be unreliable on some hardware

SVN-Revision: 30915
---

diff --git a/package/mac80211/patches/560-ath9k_optimize_beacon_tx.patch b/package/mac80211/patches/560-ath9k_optimize_beacon_tx.patch
deleted file mode 100644
index cfa1eb7c37..0000000000
--- a/package/mac80211/patches/560-ath9k_optimize_beacon_tx.patch
+++ /dev/null
@@ -1,129 +0,0 @@
---- a/drivers/net/wireless/ath/ath9k/beacon.c
-+++ b/drivers/net/wireless/ath/ath9k/beacon.c
-@@ -357,41 +357,12 @@ void ath_beacon_tasklet(unsigned long da
- 	struct ieee80211_vif *vif;
- 	bool edma = !!(ah->caps.hw_caps & ATH9K_HW_CAP_EDMA);
- 	int slot;
--	u32 bfaddr, bc = 0;
--
--	/*
--	 * Check if the previous beacon has gone out.  If
--	 * not don't try to post another, skip this period
--	 * and wait for the next.  Missed beacons indicate
--	 * a problem and should not occur.  If we miss too
--	 * many consecutive beacons reset the device.
--	 */
--	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
--		sc->beacon.bmisscnt++;
--
--		if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) {
--			ath_dbg(common, BSTUCK,
--				"missed %u consecutive beacons\n",
--				sc->beacon.bmisscnt);
--			ath9k_hw_stop_dma_queue(ah, sc->beacon.beaconq);
--			if (sc->beacon.bmisscnt > 3)
--				ath9k_hw_bstuck_nfcal(ah);
--		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
--			ath_dbg(common, BSTUCK, "beacon is officially stuck\n");
--			sc->sc_flags |= SC_OP_TSF_RESET;
--			ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
--		}
--
--		return;
--	}
- 
- 	/*
- 	 * Generate beacon frames. we are sending frames
- 	 * staggered so calculate the slot for this frame based
- 	 * on the tsf to safeguard against missing an swba.
- 	 */
--
--
- 	if (ah->opmode == NL80211_IFTYPE_AP) {
- 		u16 intval;
- 		u32 tsftu;
-@@ -412,23 +383,6 @@ void ath_beacon_tasklet(unsigned long da
- 		vif = sc->beacon.bslot[slot];
- 	}
- 
--
--	bfaddr = 0;
--	if (vif) {
--		bf = ath_beacon_generate(sc->hw, vif);
--		if (bf != NULL) {
--			bfaddr = bf->bf_daddr;
--			bc = 1;
--		}
--
--		if (sc->beacon.bmisscnt != 0) {
--			ath_dbg(common, BSTUCK,
--				"resume beacon xmit after %u misses\n",
--				sc->beacon.bmisscnt);
--			sc->beacon.bmisscnt = 0;
--		}
--	}
--
- 	/*
- 	 * Handle slot time change when a non-ERP station joins/leaves
- 	 * an 11g network.  The 802.11 layer notifies us via callback,
-@@ -453,15 +407,54 @@ void ath_beacon_tasklet(unsigned long da
- 		ath9k_hw_init_global_settings(ah);
- 		sc->beacon.updateslot = OK;
- 	}
--	if (bfaddr != 0) {
--		/* NB: cabq traffic should already be queued and primed */
--		ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bfaddr);
- 
--		if (!edma)
--			ath9k_hw_txstart(ah, sc->beacon.beaconq);
-+	if (!vif)
-+		return;
-+
-+	/*
-+	 * Check if the previous beacon has gone out.  If
-+	 * not don't try to post another, skip this period
-+	 * and wait for the next.  Missed beacons indicate
-+	 * a problem and should not occur.  If we miss too
-+	 * many consecutive beacons reset the device.
-+	 */
-+	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
-+		sc->beacon.bmisscnt++;
-+
-+		if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) {
-+			ath_dbg(common, BSTUCK,
-+				"missed %u consecutive beacons\n",
-+				sc->beacon.bmisscnt);
-+			ath9k_hw_stop_dma_queue(ah, sc->beacon.beaconq);
-+			if (sc->beacon.bmisscnt > 3)
-+				ath9k_hw_bstuck_nfcal(ah);
-+		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
-+			ath_dbg(common, BSTUCK, "beacon is officially stuck\n");
-+			sc->sc_flags |= SC_OP_TSF_RESET;
-+			ieee80211_queue_work(sc->hw, &sc->hw_reset_work);
-+		}
-+
-+		return;
-+	}
-+
-+	bf = ath_beacon_generate(sc->hw, vif);
-+	if (!bf)
-+		return;
- 
--		sc->beacon.ast_be_xmit += bc;     /* XXX per-vif? */
-+	if (sc->beacon.bmisscnt != 0) {
-+		ath_dbg(common, BSTUCK,
-+			"resume beacon xmit after %u misses\n",
-+			sc->beacon.bmisscnt);
-+		sc->beacon.bmisscnt = 0;
- 	}
-+
-+	/* NB: cabq traffic should already be queued and primed */
-+	ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
-+
-+	if (!edma)
-+		ath9k_hw_txstart(ah, sc->beacon.beaconq);
-+
-+	sc->beacon.ast_be_xmit++;
- }
- 
- static void ath9k_beacon_init(struct ath_softc *sc,
diff --git a/package/mac80211/patches/560-ath9k_optimize_hw_check.patch b/package/mac80211/patches/560-ath9k_optimize_hw_check.patch
new file mode 100644
index 0000000000..61430305b7
--- /dev/null
+++ b/package/mac80211/patches/560-ath9k_optimize_hw_check.patch
@@ -0,0 +1,32 @@
+--- a/drivers/net/wireless/ath/ath9k/beacon.c
++++ b/drivers/net/wireless/ath/ath9k/beacon.c
+@@ -369,6 +369,9 @@ void ath_beacon_tasklet(unsigned long da
+ 	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
+ 		sc->beacon.bmisscnt++;
+ 
++		if (!ath9k_hw_check_alive(ah))
++			ieee80211_queue_work(sc->hw, &sc->hw_check_work);
++
+ 		if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) {
+ 			ath_dbg(common, BSTUCK,
+ 				"missed %u consecutive beacons\n",
+--- a/drivers/net/wireless/ath/ath9k/main.c
++++ b/drivers/net/wireless/ath/ath9k/main.c
+@@ -695,17 +695,6 @@ void ath9k_tasklet(unsigned long data)
+ 		goto out;
+ 	}
+ 
+-	/*
+-	 * Only run the baseband hang check if beacons stop working in AP or
+-	 * IBSS mode, because it has a high false positive rate. For station
+-	 * mode it should not be necessary, since the upper layers will detect
+-	 * this through a beacon miss automatically and the following channel
+-	 * change will trigger a hardware reset anyway
+-	 */
+-	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0 &&
+-	    !ath9k_hw_check_alive(ah))
+-		ieee80211_queue_work(sc->hw, &sc->hw_check_work);
+-
+ 	if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
+ 		/*
+ 		 * TSF sync does not look correct; remain awake to sync with
diff --git a/package/mac80211/patches/561-ath9k_optimize_hw_check.patch b/package/mac80211/patches/561-ath9k_optimize_hw_check.patch
deleted file mode 100644
index d10fbede50..0000000000
--- a/package/mac80211/patches/561-ath9k_optimize_hw_check.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/drivers/net/wireless/ath/ath9k/beacon.c
-+++ b/drivers/net/wireless/ath/ath9k/beacon.c
-@@ -421,6 +421,9 @@ void ath_beacon_tasklet(unsigned long da
- 	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) {
- 		sc->beacon.bmisscnt++;
- 
-+		if (!ath9k_hw_check_alive(ah))
-+			ieee80211_queue_work(sc->hw, &sc->hw_check_work);
-+
- 		if (sc->beacon.bmisscnt < BSTUCK_THRESH * sc->nbcnvifs) {
- 			ath_dbg(common, BSTUCK,
- 				"missed %u consecutive beacons\n",
---- a/drivers/net/wireless/ath/ath9k/main.c
-+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -695,17 +695,6 @@ void ath9k_tasklet(unsigned long data)
- 		goto out;
- 	}
- 
--	/*
--	 * Only run the baseband hang check if beacons stop working in AP or
--	 * IBSS mode, because it has a high false positive rate. For station
--	 * mode it should not be necessary, since the upper layers will detect
--	 * this through a beacon miss automatically and the following channel
--	 * change will trigger a hardware reset anyway
--	 */
--	if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0 &&
--	    !ath9k_hw_check_alive(ah))
--		ieee80211_queue_work(sc->hw, &sc->hw_check_work);
--
- 	if ((status & ATH9K_INT_TSFOOR) && sc->ps_enabled) {
- 		/*
- 		 * TSF sync does not look correct; remain awake to sync with