From: Eilon Greenstein <eilong@broadcom.com>
Date: Wed, 12 Aug 2009 08:23:53 +0000 (+0000)
Subject: bnx2x: Remove SGMII configuration when not required
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=57937203aa077520a7e1665bfb7071b3cbb3f5a9;p=openwrt%2Fstaging%2Fblogic.git

bnx2x: Remove SGMII configuration when not required

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index b81a05737d48..c163c42bc1fe 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -1276,14 +1276,14 @@ static void bnx2x_program_serdes(struct link_params *params,
 	struct bnx2x *bp = params->bp;
 	u16 reg_val;
 
-	/* program duplex, disable autoneg */
-
+	/* program duplex, disable autoneg and sgmii*/
 	CL45_RD_OVER_CL22(bp, params->port,
 			      params->phy_addr,
 			      MDIO_REG_BANK_COMBO_IEEE0,
 			      MDIO_COMBO_IEEE0_MII_CONTROL, &reg_val);
 	reg_val &= ~(MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX |
-		     MDIO_COMBO_IEEO_MII_CONTROL_AN_EN);
+		     MDIO_COMBO_IEEO_MII_CONTROL_AN_EN |
+		     MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK);
 	if (params->req_duplex == DUPLEX_FULL)
 		reg_val |= MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX;
 	CL45_WR_OVER_CL22(bp, params->port,
@@ -5271,6 +5271,13 @@ static u8 bnx2x_ext_phy_is_link_up(struct link_params *params,
 			ext_phy_link_up = 0;
 			break;
 		}
+		/* Set SGMII mode for external phy */
+		if (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) {
+			if (vars->line_speed < SPEED_1000)
+				vars->phy_flags |= PHY_SGMII_FLAG;
+			else
+				vars->phy_flags &= ~PHY_SGMII_FLAG;
+		}
 
 	} else { /* SerDes */
 		ext_phy_type = SERDES_EXT_PHY_TYPE(params->ext_phy_config);