From: David Yang Date: Sun, 6 Jun 2021 14:42:49 +0000 (+0800) Subject: ramips: add support for Netcore NW5212 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=577f3fdbc92c91e252ee3b134637816a240d89f7;p=openwrt%2Fstaging%2Fwigyori.git ramips: add support for Netcore NW5212 This patch adds support for Netcore NW5212, provided by some carrier in China. Specifications: -------------- * SoC: Mediatek MT7620A * RAM: 128MB DDR2 * Flash: 16MB SPI NOR flash (Winbond W25Q128BV) * WiFi 2.4GHz: builtin * Ethernet: builtin * LED: Power, WAN, LAN 1-4, WiFi * Buttons: Reset (GPIO 13) * UART: Serial console (57600 8n1) * USB: 1 x USB2 Installation: ------------ The router comes with OpenWrt 14.07 built with MTK SDK. However, as the modem is provided by carriers, so the web interface is highly minimized and only contains a static page with no interaction options. There are two possible ways to gain the access. 1) Open the shell and use a UART2USB convert to gain TTY access. Please notice you have to remove resistance R54 at the back of the board otherwise you won't be able to input anything. 2) Use built-in backdoor. Access http://192.168.1.1/cgi-bin/_/testxst to start dropbear service at port 9122. Be warned the software is super old and only diffie-hellman-group1-sha1, diffie-hellman-group14-sha1, kexguess2@matt.ucc.asn.au is support, you may not be able to connect it with an up-to-date ssh client. After you can control the device, flash the firmware as usual. Here are some hints for that. Option 1 (via original firmware): 1) Setup HTTP server on your computer, for example: python3 -m http.server 2) Connect to the route and flash: cd /tmp wget http:/// mtd -r write firmware Option 2 (replacing u-boot via breed): 1) Download breed-mt7620-reset13.bin from https://breed.hackpascal.net/ 2) Setup HTTP server on your computer, for example: python3 -m http.server You can skip this step if your breed is already accessible from HTTP, since the original wget does not support HTTPS. 3) Connect to the route and flash breed: cd /tmp wget http:///breed-mt7620-reset13.bin mtd write breed-mt7620-reset13.bin Bootloader 4) Reboot. Hold reset key or press any key in TTY to enter breed. 5) Access breed web interface (http://192.168.1.1/). Choose the flash layout to be 0x50000 and flash new firmware. MAC addresses: ------------- There are three MACs stored in factory, as in MT7620A reference design: source address usage 0x4 label WLAN 0x28 label MAC 1 0x2e label + 1 MAC 2 However, the OEM firmware only uses one single MAC (label) for all interfaces, probably a misconfiguration. Signed-off-by: David Yang --- diff --git a/target/linux/ramips/dts/mt7620a_netcore_nw5212.dts b/target/linux/ramips/dts/mt7620a_netcore_nw5212.dts new file mode 100644 index 0000000000..25287ebc0b --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netcore_nw5212.dts @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "netcore,nw5212", "ralink,mt7620a-soc"; + model = "Netcore NW5212"; + + aliases { + label-mac-device = ðernet; + }; + + leds { + compatible = "gpio-leds"; + + lan4 { + label = "green:lan4"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + lan3 { + label = "green:lan3"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "green:lan2"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "green:lan1"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "green:wan"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "green:wlan2g"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <70000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "uartf", "wled", "ephy"; + function = "gpio"; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; + mediatek,portmap = "llllw"; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index b3551fa6cb..f6ad162779 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -729,6 +729,16 @@ define Device/microduino_microwrt endef TARGET_DEVICES += microduino_microwrt +define Device/netcore_nw5212 + SOC := mt7620a + IMAGE_SIZE := 16064k + BLOCKSIZE := 4k + DEVICE_VENDOR := Netcore + DEVICE_MODEL := NW5212 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci +endef +TARGET_DEVICES += netcore_nw5212 + define Device/netgear_ex2700 SOC := mt7620a NETGEAR_HW_ID := 29764623+4+0+32+2x2+0 diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds index 889818c631..b1dc36672d 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds @@ -160,6 +160,14 @@ lenovo,newifi-y1s) ucidef_set_led_netdev "wifi5g" "WIFI5G" "blue:wifi" "wlan0" ucidef_set_led_netdev "wan" "WAN" "blue:internet" "eth0.2" "tx rx" ;; +netcore,nw5212|\ +netgear,jwnr2010-v5) + ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x08" + ucidef_set_led_switch "lan2" "lan2" "green:lan2" "switch0" "0x04" + ucidef_set_led_switch "lan3" "lan3" "green:lan3" "switch0" "0x02" + ucidef_set_led_switch "lan4" "lan4" "green:lan4" "switch0" "0x01" + ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10" + ;; netgear,ex2700|\ netgear,wn3000rp-v3|\ netgear,wn3100rp-v2) @@ -170,13 +178,6 @@ netgear,ex6130) ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "green:router" "wlan0" ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "green:device" "wlan1" ;; -netgear,jwnr2010-v5) - ucidef_set_led_switch "lan1" "lan1" "green:lan1" "switch0" "0x08" - ucidef_set_led_switch "lan2" "lan2" "green:lan2" "switch0" "0x04" - ucidef_set_led_switch "lan3" "lan3" "green:lan3" "switch0" "0x02" - ucidef_set_led_switch "lan4" "lan4" "green:lan4" "switch0" "0x01" - ucidef_set_led_switch "wan" "wan" "green:wan" "switch0" "0x10" - ;; netgear,pr2000) ucidef_set_led_switch "internet" "internet" "green:internet" "switch0" "0x01" ;; diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 7b1766766b..79df102056 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -111,6 +111,7 @@ ramips_setup_interfaces() "0:lan" "6@eth0" ;; dlink,dir-810l|\ + netcore,nw5212|\ netgear,jwnr2010-v5|\ phicomm,k2-v22.4|\ phicomm,k2-v22.5|\