From: Michael Heimpold Date: Sun, 19 Apr 2020 22:21:59 +0000 (+0200) Subject: uboot-mxs: bump to v2020.04 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=575b9ab2adec5350419c6086bcbc55abcddbb011;p=openwrt%2Fstaging%2Fwigyori.git uboot-mxs: bump to v2020.04 Also update the U-Boot BSP patch for I2SE Duckbill devices. Signed-off-by: Michael Heimpold --- diff --git a/package/boot/uboot-mxs/Makefile b/package/boot/uboot-mxs/Makefile index 3112d673d4..2a202dca8f 100644 --- a/package/boot/uboot-mxs/Makefile +++ b/package/boot/uboot-mxs/Makefile @@ -8,10 +8,10 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/kernel.mk -PKG_VERSION:=2020.01 +PKG_VERSION:=2020.04 PKG_RELEASE:=1 -PKG_HASH:=aa453c603208b1b27bd03525775a7f79b443adec577fdc6e8f06974025a135f1 +PKG_HASH:=fe732aaf037d9cc3c0909bad8362af366ae964bbdac6913a34081ff4ad565372 include $(INCLUDE_DIR)/u-boot.mk include $(INCLUDE_DIR)/package.mk diff --git a/package/boot/uboot-mxs/patches/001-add-i2se-duckbill.patch b/package/boot/uboot-mxs/patches/001-add-i2se-duckbill.patch index 033c843202..50702cb3cb 100644 --- a/package/boot/uboot-mxs/patches/001-add-i2se-duckbill.patch +++ b/package/boot/uboot-mxs/patches/001-add-i2se-duckbill.patch @@ -1,6 +1,6 @@ -From b66c70cd15fa02297b94d928970932ef62c2ff02 Mon Sep 17 00:00:00 2001 +From 83ee930c18b068c9a16b66c01aaa5d6e06570152 Mon Sep 17 00:00:00 2001 From: Michael Heimpold -Date: Sun, 3 Nov 2019 00:50:21 +0100 +Date: Sun, 19 Apr 2020 02:46:46 +0200 Subject: [PATCH] arm: mxs: add support for I2SE's Duckbill boards The Duckbill devices are small, pen-drive sized boards based on @@ -28,13 +28,13 @@ Signed-off-by: Stefan Wahren --- arch/arm/mach-imx/mxs/Kconfig | 5 + board/i2se/duckbill/Kconfig | 15 +++ - board/i2se/duckbill/MAINTAINERS | 6 ++ + board/i2se/duckbill/MAINTAINERS | 6 + board/i2se/duckbill/Makefile | 10 ++ - board/i2se/duckbill/duckbill.c | 186 ++++++++++++++++++++++++++++++++ - board/i2se/duckbill/iomux.c | 156 +++++++++++++++++++++++++++ - configs/duckbill_defconfig | 41 +++++++ - include/configs/duckbill.h | 176 ++++++++++++++++++++++++++++++ - 8 files changed, 595 insertions(+) + board/i2se/duckbill/duckbill.c | 189 ++++++++++++++++++++++++++++++++ + board/i2se/duckbill/iomux.c | 157 ++++++++++++++++++++++++++ + configs/duckbill_defconfig | 43 ++++++++ + include/configs/duckbill.h | 172 +++++++++++++++++++++++++++++ + 8 files changed, 597 insertions(+) create mode 100644 board/i2se/duckbill/Kconfig create mode 100644 board/i2se/duckbill/MAINTAINERS create mode 100644 board/i2se/duckbill/Makefile @@ -44,7 +44,7 @@ Signed-off-by: Stefan Wahren create mode 100644 include/configs/duckbill.h diff --git a/arch/arm/mach-imx/mxs/Kconfig b/arch/arm/mach-imx/mxs/Kconfig -index 68072d5a1f..82aaa3ef76 100644 +index b90d7b6e41..e7d8bc6792 100644 --- a/arch/arm/mach-imx/mxs/Kconfig +++ b/arch/arm/mach-imx/mxs/Kconfig @@ -50,6 +50,10 @@ config TARGET_APX4DEVKIT @@ -58,14 +58,14 @@ index 68072d5a1f..82aaa3ef76 100644 config TARGET_MX28EVK bool "Support mx28evk" select BOARD_EARLY_INIT_F -@@ -67,6 +71,7 @@ config SYS_SOC +@@ -70,6 +74,7 @@ config SYS_SOC source "board/bluegiga/apx4devkit/Kconfig" source "board/freescale/mx28evk/Kconfig" +source "board/i2se/duckbill/Kconfig" + source "board/liebherr/xea/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/schulercontrol/sc_sps_1/Kconfig" - source "board/technologic/ts4600/Kconfig" diff --git a/board/i2se/duckbill/Kconfig b/board/i2se/duckbill/Kconfig new file mode 100644 index 0000000000..98c1e4689f @@ -101,13 +101,13 @@ index 0000000000..5496baa330 +F: configs/duckbill_defconfig diff --git a/board/i2se/duckbill/Makefile b/board/i2se/duckbill/Makefile new file mode 100644 -index 0000000000..0079eb413c +index 0000000000..11bac98e4c --- /dev/null +++ b/board/i2se/duckbill/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0+ +# -+# (C) Copyright 2014-2019 ++# (C) Copyright 2014-2020 +# Michael Heimpold, mhei@heimpold.de. + +ifndef CONFIG_SPL_BUILD @@ -117,15 +117,15 @@ index 0000000000..0079eb413c +endif diff --git a/board/i2se/duckbill/duckbill.c b/board/i2se/duckbill/duckbill.c new file mode 100644 -index 0000000000..f93c372611 +index 0000000000..93defc6c28 --- /dev/null +++ b/board/i2se/duckbill/duckbill.c -@@ -0,0 +1,186 @@ +@@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * I2SE Duckbill board + * -+ * (C) Copyright 2014-2019 Michael Heimpold ++ * Copyright (C) 2014-2020 Michael Heimpold + */ + +#include @@ -177,14 +177,14 @@ index 0000000000..f93c372611 + return 0; +} + -+#ifdef CONFIG_CMD_MMC ++#ifdef CONFIG_CMD_MMC +int board_mmc_init(bd_t *bis) +{ + return mxsmmc_initialize(bis, 0, NULL, NULL); +} +#endif + -+#ifdef CONFIG_CMD_NET ++#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bis) +{ + unsigned int reset_gpio; @@ -198,6 +198,7 @@ index 0000000000..f93c372611 + reset_gpio = MX28_PAD_GPMI_ALE__GPIO_0_26; + + /* Reset PHY */ ++ gpio_request(reset_gpio, "enet0_phy_rst"); + gpio_direction_output(reset_gpio, 0); + udelay(200); + gpio_set_value(reset_gpio, 1); @@ -270,6 +271,7 @@ index 0000000000..f93c372611 + char *s; + + /* Board revision detection */ ++ gpio_request(MX28_PAD_LCD_D17__GPIO_1_17, "board_revision"); + gpio_direction_input(MX28_PAD_LCD_D17__GPIO_1_17); + + /* MX28_PAD_LCD_D17__GPIO_1_17: v1 = pull-down, v2 = pull-up */ @@ -290,6 +292,7 @@ index 0000000000..f93c372611 + led_red_gpio = MX28_PAD_AUART1_RX__GPIO_3_4; + else + led_red_gpio = MX28_PAD_SAIF0_LRCLK__GPIO_3_21; ++ gpio_request(led_red_gpio, "led_red"); + gpio_direction_output(led_red_gpio, 1); + + if (system_rev == 1) @@ -309,15 +312,15 @@ index 0000000000..f93c372611 +} diff --git a/board/i2se/duckbill/iomux.c b/board/i2se/duckbill/iomux.c new file mode 100644 -index 0000000000..1db3c52c34 +index 0000000000..c6cc211181 --- /dev/null +++ b/board/i2se/duckbill/iomux.c -@@ -0,0 +1,156 @@ +@@ -0,0 +1,157 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * I2SE Duckbill IOMUX setup + * -+ * Copyright (C) 2013-2019 Michael Heimpold ++ * Copyright (C) 2013-2020 Michael Heimpold + */ + +#include @@ -462,6 +465,7 @@ index 0000000000..1db3c52c34 +{ + mxs_common_spl_init(arg, resptr, iomux_setup, ARRAY_SIZE(iomux_setup)); + ++ gpio_request(MX28_PAD_LCD_D17__GPIO_1_17, "board_revision"); + gpio_direction_input(MX28_PAD_LCD_D17__GPIO_1_17); + + if (gpio_get_value(MX28_PAD_LCD_D17__GPIO_1_17)) @@ -471,10 +475,10 @@ index 0000000000..1db3c52c34 +} diff --git a/configs/duckbill_defconfig b/configs/duckbill_defconfig new file mode 100644 -index 0000000000..fcdec4f3c7 +index 0000000000..b2d7fbcf77 --- /dev/null +++ b/configs/duckbill_defconfig -@@ -0,0 +1,41 @@ +@@ -0,0 +1,43 @@ +CONFIG_ARM=y +CONFIG_ARCH_MX28=y +CONFIG_SYS_TEXT_BASE=0x40002000 @@ -510,6 +514,8 @@ index 0000000000..fcdec4f3c7 +CONFIG_CMD_FS_GENERIC=y +CONFIG_DOS_PARTITION=y +CONFIG_ENV_IS_IN_MMC=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_ENV_OFFSET_REDUND=0x40000 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_MXS_GPIO=y +CONFIG_MMC_MXS=y @@ -518,13 +524,13 @@ index 0000000000..fcdec4f3c7 +CONFIG_OF_LIBFDT=y diff --git a/include/configs/duckbill.h b/include/configs/duckbill.h new file mode 100644 -index 0000000000..76da1008b8 +index 0000000000..565d8c58b7 --- /dev/null +++ b/include/configs/duckbill.h -@@ -0,0 +1,176 @@ +@@ -0,0 +1,172 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* -+ * Copyright (C) 2014-2019 Michael Heimpold ++ * Copyright (C) 2014-2020 Michael Heimpold + * + */ +#ifndef __CONFIGS_DUCKBILL_H__ @@ -545,7 +551,6 @@ index 0000000000..76da1008b8 +/* Environment is in MMC */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_MMC_ENV_DEV 0 -+#define CONFIG_SYS_REDUNDAND_ENVIRONMENT + +/* FEC Ethernet on SoC */ +#ifdef CONFIG_CMD_NET @@ -622,9 +627,6 @@ index 0000000000..76da1008b8 + "else " \ + "echo Firmware Update OK; " \ + "fi; setenv error\0" \ -+ "erase_mmc=mmc erase 0 2\0" \ -+ "erase_env1=mmc erase 100 100\0" \ -+ "erase_env2=mmc erase 200 100\0" \ + "image=zImage\0" \ + "console=ttyAMA0\0" \ + "fdt_addr=0x41000000\0" \ @@ -637,8 +639,8 @@ index 0000000000..76da1008b8 + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot} " \ + "rootwait bootsys=${bootsys} panic=1 ${extraargs}\0" \ -+ "loadimage=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${image}\0" \ -+ "loadfdt=ext4load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/${fdt_file}\0" \ ++ "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} /boot/${image}\0" \ ++ "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /boot/${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "setexpr mmcpart 1 + ${bootsys}; " \ + "setenv mmcroot /dev/mmcblk0p${mmcpart}; " \