From: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
Date: Wed, 14 Aug 2019 00:42:15 +0000 (+0000)
Subject: at91: add uboot environments
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=575950e37698b5d59f7a30a44f92327844c58b99;p=openwrt%2Fstaging%2Fzorun.git

at91: add uboot environments

add uboot environments to sdcard image

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
---

diff --git a/target/linux/at91/image/sama5.mk b/target/linux/at91/image/sama5.mk
index d02f51a1db..4fee464a00 100644
--- a/target/linux/at91/image/sama5.mk
+++ b/target/linux/at91/image/sama5.mk
@@ -27,6 +27,15 @@ define Build/at91-sdcard
           $(BIN_DIR)/at91bootstrap-$(DEVICE_NAME:at91-%=%)sd_uboot/at91bootstrap.bin \
           ::BOOT.bin)
 
+  $(CP) uboot-env.txt $@-uboot-env.txt
+  sed -i '2d;3d' $@-uboot-env.txt
+  sed -i '2i board='"$(DEVICE_NAME:at91-%=%)"'' $@-uboot-env.txt
+  sed -i '3i board_name='"$(DEVICE_NAME:at91-%=%)"'' $@-uboot-env.txt
+
+  mkenvimage -s 0x4000 -o $@-uboot.env $@-uboot-env.txt
+
+  mcopy -i $@.boot $@-uboot.env ::uboot.env
+
   ./gen_at91_sdcard_img.sh \
       $@.img \
       $@.boot \
@@ -36,7 +45,7 @@ define Build/at91-sdcard
 
   gzip -nc9 $@.img > $@
 
-  rm -f $@.img $@.boot )
+  rm -f $@.img $@.boot $@-uboot.env $@-uboot-env.txt)
 endef
 
 define Device/at91-sama5d2_xplained
diff --git a/target/linux/at91/image/uboot-env.txt b/target/linux/at91/image/uboot-env.txt
new file mode 100644
index 0000000000..80d051b72f
--- /dev/null
+++ b/target/linux/at91/image/uboot-env.txt
@@ -0,0 +1,14 @@
+/* Do Not remove First 2 lines, Makefile will modify these lines with proper board names */
+board=at91sam9x25ek
+board_name=at91sam9x25ek
+bootargs=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
+bootargsd2=console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p2 rw rootwait rootfstype=ext4
+bootargsxx=console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait rootfstype=ext4
+bootcmd=run setbootargs; run fatload_mmc; bootm 0x21000000
+bootdelay=1
+fatload_mmc=if test ${board_name} = sama5d2_xplained || test ${board_name} = sama5d27_som1_ek; then fatload mmc 1:1 0x21000000 ${board_name}-fit.itb; else fatload mmc 0:1 0x21000000 ${board_name}-fit.itb; fi
+setbootargs=if test ${board_name} = sama5d2_xplained || test ${board_name} = sama5d27_som1_ek; then setenv bootargs ${bootargsd2}; else setenv bootargs ${bootargsxx}; fi
+ethact=gmac0
+stderr=serial
+stdin=serial
+stdout=serial