From: Xiaobing Luo Date: Fri, 2 Jun 2023 01:18:51 +0000 (+0000) Subject: ath79: add support for TP-Link TL-WDR6500 v2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=56f821fc6b500faffdcade0634d2db9be9f96134;p=openwrt%2Fstaging%2Fansuel.git ath79: add support for TP-Link TL-WDR6500 v2 This ports the TP-Link TL-WDR6500 v2 from ar71xx to ath79. Specifications: SoC: QCA9561 CPU: 750 MHz Flash: 8 MiB (Winbond W25Q64FVSIG) RAM: 128 MiB WiFi 2.4 GHz: QCA956X 3x3 MIMO 802.11b/g/n WiFi 5 GHz: QCA9882-BR4A 2x2 MIMO 802.11a/n/ac Ethernet: 4x LAN and 1x WAN (all 100M) USB: 1x Header Flashing instructions: As it appears, the device does not support flashing via GUI or TFTP, only serial is possible. Signed-off-by: Adrian Schmutzler Signed-off-by: Xiaobing Luo --- diff --git a/target/linux/ath79/dts/qca9561_tplink_tl-wdr6500-v2.dts b/target/linux/ath79/dts/qca9561_tplink_tl-wdr6500-v2.dts new file mode 100644 index 0000000000..15c5868659 --- /dev/null +++ b/target/linux/ath79/dts/qca9561_tplink_tl-wdr6500-v2.dts @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca956x.dtsi" + +#include +#include + +/ { + compatible = "tplink,tl-wdr6500-v2", "qca,qca9561"; + model = "TP-Link TL-WDR6500 v2"; + + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + label-mac-device = ð1; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + lan4 { + label = "green:lan4"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + lan3 { + label = "green:lan3"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "green:lan2"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "green:lan1"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "green:wan"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + }; + + led_system: system { + label = "white:system"; + gpios = <&gpio 21 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x010000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_uboot_0fc00: macaddr@0fc00 { + reg = <0x0fc00 0x6>; + }; + }; + + partition@10000 { + compatible = "tplink,firmware"; + label = "firmware"; + reg = <0x010000 0x7e0000>; + }; + + partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + calibration_ath9k: calibration@1000 { + reg = <0x1000 0x440>; + }; + + calibration_ath10k: calibration@5000 { + reg = <0x5000 0x844>; + }; + }; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&pcie { + status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + + nvmem-cells = <&macaddr_uboot_0fc00>, <&calibration_ath10k>; + nvmem-cell-names = "mac-address", "calibration"; + mac-address-increment = <(-2)>; + }; +}; + +&mdio0 { + status = "okay"; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + nvmem-cells = <&macaddr_uboot_0fc00>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; +}; + +ð1 { + status = "okay"; + + nvmem-cells = <&macaddr_uboot_0fc00>; + nvmem-cell-names = "mac-address"; +}; + +&wmac { + status = "okay"; + + nvmem-cells = <&macaddr_uboot_0fc00>, <&calibration_ath9k>; + nvmem-cell-names = "mac-address", "calibration"; + mac-address-increment = <(-1)>; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 2ee4ed2544..10c67991fd 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -30,6 +30,13 @@ tplink,cpe610-v2|\ tplink,tl-wa1201-v2) ucidef_set_led_netdev "lan" "LAN" "green:lan" "eth0" ;; +tplink,tl-wdr6500-v2) + ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x02" + ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x04" + ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x08" + ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x10" + ;; alfa-network,n2q) ucidef_set_led_netdev "lan2" "LAN2" "orange:lan2" "eth1" ucidef_set_led_switch "lan1" "LAN1" "orange:lan1" "switch0" "0x10" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 4f535f8a64..d18eddf5b7 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -247,7 +247,8 @@ ath79_setup_interfaces() comfast,cf-e560ac|\ qca,ap143-8m|\ qca,ap143-16m|\ - tplink,tl-wr841hp-v3) + tplink,tl-wr841hp-v3|\ + tplink,tl-wdr6500-v2) ucidef_set_interface_wan "eth1" ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index cfabc89b8d..460297e7e9 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -676,6 +676,22 @@ define Device/tplink_tl-wdr4900-v2 endef TARGET_DEVICES += tplink_tl-wdr4900-v2 +define Device/tplink_tl-wdr6500-v2 + $(Device/tplink-8mlzma) + SOC := qca9561 + DEVICE_MODEL := TL-WDR6500 + DEVICE_VARIANT := v2 + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev \ + kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct + IMAGE_SIZE := 8000k + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma + TPLINK_HWID := 0x65000002 + TPLINK_HEADER_VERSION := 1 + SUPPORTED_DEVICES += tl-wdr6500-v2 +endef +TARGET_DEVICES += tplink_tl-wdr6500-v2 + define Device/tplink_tl-wdr7500-v3 $(Device/tplink-8mlzma) SOC := qca9558