From: Sven Wegener Date: Sat, 12 Jun 2021 19:56:21 +0000 (+0200) Subject: mediatek: do not use gpiod_set_raw_value() X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=56c2d15587dfe5285f1cf3bfb236c827bc446465;p=openwrt%2Fstaging%2Fjow.git mediatek: do not use gpiod_set_raw_value() The polarity of the signal is set in the device dts. Signed-off-by: Sven Wegener --- diff --git a/target/linux/mediatek/files/drivers/leds/leds-ubnt-ledbar.c b/target/linux/mediatek/files/drivers/leds/leds-ubnt-ledbar.c index 9c68d40eec..c5d668836b 100644 --- a/target/linux/mediatek/files/drivers/leds/leds-ubnt-ledbar.c +++ b/target/linux/mediatek/files/drivers/leds/leds-ubnt-ledbar.c @@ -68,7 +68,7 @@ static int ubnt_ledbar_apply_state(struct ubnt_ledbar *ledbar) led_msg[UBNT_LEDBAR_TRANSACTION_GREEN_IDX] = ledbar->led_green.brightness; led_msg[UBNT_LEDBAR_TRANSACTION_RED_IDX] = ledbar->led_red.brightness; - gpiod_set_raw_value(ledbar->enable_gpio, 1); + gpiod_set_value(ledbar->enable_gpio, 1); msleep(10); @@ -88,7 +88,7 @@ static int ubnt_ledbar_apply_state(struct ubnt_ledbar *ledbar) msleep(10); out_gpio: - gpiod_set_raw_value(ledbar->enable_gpio, 0); + gpiod_set_value(ledbar->enable_gpio, 0); mutex_unlock(&ledbar->lock);