From: Kishon Vijay Abraham I Date: Wed, 6 Feb 2013 08:50:34 +0000 (+0530) Subject: usb: gadget: make usb functions to load before gadget driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=56aa45adcc5b793369e535a4b7177f1c7314b577;p=openwrt%2Fstaging%2Fblogic.git usb: gadget: make usb functions to load before gadget driver The current ordering in makefile makes gadget drivers be loaded before usb functions which causes usb_get_function_instance() to fail when gadget modules are statically linked to the kernel binary. Changed the ordering here so that USB functions are loaded before gadget drivers. Note that this is only a temporary solution and a more robust fix is needed in the long run. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 97a13c349cc5..82fb22511356 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -35,6 +35,12 @@ mv_udc-y := mv_udc_core.o obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o +# USB Functions +obj-$(CONFIG_USB_F_ACM) += f_acm.o +f_ss_lb-y := f_loopback.o f_sourcesink.o +obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o +obj-$(CONFIG_USB_U_SERIAL) += u_serial.o + # # USB gadget drivers # @@ -74,9 +80,3 @@ obj-$(CONFIG_USB_G_WEBCAM) += g_webcam.o obj-$(CONFIG_USB_G_NCM) += g_ncm.o obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o - -# USB Functions -obj-$(CONFIG_USB_F_ACM) += f_acm.o -f_ss_lb-y := f_loopback.o f_sourcesink.o -obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o -obj-$(CONFIG_USB_U_SERIAL) += u_serial.o