From: Koen Vandeputte Date: Thu, 15 Feb 2018 14:16:01 +0000 (+0100) Subject: uqmi: use general method for state cleaning X-Git-Tag: v17.01.5~84 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5661ac1de4d81c51cdc6f6f333bec3608ec43438;p=openwrt%2Fstaging%2Fchunkeey.git uqmi: use general method for state cleaning Debugging shows that using the general method properly cleans on each run, while the method specifying the client-ID shows "No effect" even while in connected state. Fixes several connectivity issues seen on specific modems. Signed-off-by: Koen Vandeputte --- diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh index 1619c2b35e..eba0922e57 100755 --- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh +++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh @@ -97,6 +97,10 @@ proto_qmi_setup() { } } + # Cleanup current state if any + uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect + + # Set IP format uqmi -s -d "$device" --set-data-format 802.3 uqmi -s -d "$device" --wda-set-data-format 802.3 dataformat="$(uqmi -s -d "$device" --wda-get-data-format)" @@ -144,11 +148,6 @@ proto_qmi_setup() { uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null - # try to clear previous autoconnect state - uqmi -s -d "$device" --set-client-id wds,"$cid_4" \ - --stop-network 0xffffffff \ - --autoconnect > /dev/null - pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \ --start-network \ ${apn:+--apn $apn} \ @@ -175,11 +174,6 @@ proto_qmi_setup() { uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null - # try to clear previous autoconnect state - uqmi -s -d "$device" --set-client-id wds,"$cid_6" \ - --stop-network 0xffffffff \ - --autoconnect > /dev/null - pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \ --start-network \ ${apn:+--apn $apn} \