From: Mark Mentovai <mark@moxienet.com>
Date: Mon, 12 Apr 2021 15:59:20 +0000 (-0400)
Subject: ipq806x: ubnt,unifi-ac-hd: reorder eth0 and eth1
X-Git-Tag: mikrotik~2170
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=565814a5eeb9252d0586c9c7a576f7d1cc9d4bc3;p=openwrt%2Fstaging%2Fchunkeey.git

ipq806x: ubnt,unifi-ac-hd: reorder eth0 and eth1

The Ubiquiti UniFi AC HD (UAP-AC-HD, UAP301) has two Ethernet ports,
labeled MAIN and SECONDARY, connected to gmac2 and gmac1, respectively.
The standard probe order results in gmac1/SECONDARY being eth0 and
gmac2/MAIN being eth1. This does not match the stock firmware, is
contrary to user expectation, causes the wrong (high) MAC address to be
used in a bridged configuration (the default for this device), and makes
the gmac2/MAIN port unusable in the preinit environment (such as for
failsafe). Until a recent patch, gmac1/SECONDARY (eth0) was not even
usable.

This reorders the ports so that gmac2/MAIN is eth0, and the now-working
gmac1/SECONDARY is eth1. eth0 has the low MAC address and eth1 has the
high; when bridged, the bridge takes on the correct low MAC address.
This matches the stock firmware. The MAIN port is usable for failsafe
during preinit.

This device does not have a switch on board, so there's no possibility
to remap ports via switch configuration. "ip link set $interface name"
is used instead, during preinit before networking is configured.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
Build-tested: ipq806x/ubnt,unifi-ac-hd
Run-tested: ipq806x/ubnt,unifi-ac-hd
---

diff --git a/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth b/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth
new file mode 100644
index 0000000000..9f58473617
--- /dev/null
+++ b/target/linux/ipq806x/base-files/lib/preinit/04_reorder_eth
@@ -0,0 +1,13 @@
+. /lib/functions.sh
+
+preinit_reorder_eth() {
+	case $(board_name) in
+	ubnt,unifi-ac-hd)
+		ip link set eth0 name ethtmp
+		ip link set eth1 name eth0
+		ip link set ethtmp name eth1
+		;;
+	esac
+}
+
+boot_hook_add preinit_main preinit_reorder_eth
diff --git a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
index 70c51b90f3..672be3ca2c 100644
--- a/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
+++ b/target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts
@@ -16,8 +16,8 @@
 		led-running = &led_dome_blue;
 		led-upgrade = &led_dome_blue;
 		mdio-gpio0 = &mdio0;
-		ethernet0 = &gmac1;
-		ethernet1 = &gmac2;
+		ethernet0 = &gmac2;
+		ethernet1 = &gmac1;
 	};
 
 	leds {