From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 24 Feb 2010 13:38:31 +0000 (+0000)
Subject: ar71xx: update default network configuration file for the WNDR3700
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=560f7173b2edfcfd25503799b48aff9f62cc3d6d;p=openwrt%2Fstaging%2Flinusw.git

ar71xx: update default network configuration file for the WNDR3700

Signed-off-by: Scott Dudley <spmsink@hotmail.com>

SVN-Revision: 19830
---

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
index 3ab4bc81da..5aba76cf64 100644
--- a/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
+++ b/target/linux/ar71xx/base-files/etc/defconfig/wndr3700/network
@@ -19,8 +19,53 @@ config switch
 	option name	rtl8366s
 	option reset	1
 	option enable_vlan 1
+	# Blinkrate: 0=43ms; 1=84ms; 2=120ms; 3=170ms; 4=340ms; 5=670ms
+	option blinkrate	2
 
 config switch_vlan
 	option device	rtl8366s
 	option vlan 	0
 	option ports	"0 1 2 3 5"
+
+config switch_port
+	# Port 1 controls the GREEN configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# 0=LED off; 1=Collision/FDX; 2=Link/activity; 3-1000MB/s
+	# 4=100 MB/s; 5=10 MB/s; 6=1000 MB/s+activity; 7=100 MB/s+activity
+	# 8=10 MB/s+activity; 9=10/100 Mb/s+activity; 10: Fiber;
+	# 11: Fault; 12: Link/activity(tx); 13: Link/activity(rx);
+	# 14: Link (master); 15: separate register
+	
+	option device		rtl8366s
+	option port		1
+	option led		9
+	
+config switch_port
+	# Port 2 controls the ORANGE configuration of LEDs for
+	# the switch and the section does not correspond to a real
+	# switch port.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+	
+	option device		rtl8366s
+	option port		2
+	option led		6
+
+
+config switch_port                                              
+	# Port 5 controls the configuration of the WAN LED and the
+	# section does not correspond to a real switch port.
+	#
+	# To toggle the use of green or orange LEDs for the WAN port,
+	# see the LED setting for wndr3700:green:wan in /etc/config/system.
+	#
+	# See the key above for switch port 1 for the meaning of the
+	# 'led' setting below.
+
+	option device		rtl8366s
+	option port		5
+	option led		6
+