From: Huang Rui Date: Thu, 31 Jan 2019 11:21:25 +0000 (+0800) Subject: drm/amd/powerplay: update smu 11 driver if header for navi10 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=55f72087af714c0edfc5c2e8d82d4dbd1ae53e85;p=openwrt%2Fstaging%2Fblogic.git drm/amd/powerplay: update smu 11 driver if header for navi10 This patch updates smu 11 driver if header for navi10. UVD/VCE won't be used for navi10. Here, reverve them for vega20. Signed-off-by: Huang Rui Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- diff --git a/drivers/gpu/drm/amd/powerplay/inc/smu_11_0_driver_if.h b/drivers/gpu/drm/amd/powerplay/inc/smu_11_0_driver_if.h new file mode 100644 index 000000000000..b98cb005a46c --- /dev/null +++ b/drivers/gpu/drm/amd/powerplay/inc/smu_11_0_driver_if.h @@ -0,0 +1,1039 @@ +#ifndef __SMU11_DRIVER_IF_H__ +#define __SMU11_DRIVER_IF_H__ + +// *** IMPORTANT *** +// SMU TEAM: Always increment the interface version if +// any structure is changed in this file +#define SMU11_DRIVER_IF_VERSION 0x2D + +#define PPTABLE_NV10_SMU_VERSION 8 + +#define NUM_GFXCLK_DPM_LEVELS 16 +#define NUM_SMNCLK_DPM_LEVELS 2 +#define NUM_SOCCLK_DPM_LEVELS 8 +#define NUM_MP0CLK_DPM_LEVELS 2 +#define NUM_DCLK_DPM_LEVELS 8 +#define NUM_VCLK_DPM_LEVELS 8 +#define NUM_DCEFCLK_DPM_LEVELS 8 +#define NUM_PHYCLK_DPM_LEVELS 8 +#define NUM_DISPCLK_DPM_LEVELS 8 +#define NUM_PIXCLK_DPM_LEVELS 8 +#define NUM_UCLK_DPM_LEVELS 4 +#define NUM_MP1CLK_DPM_LEVELS 2 +#define NUM_LINK_LEVELS 2 + + +#define MAX_GFXCLK_DPM_LEVEL (NUM_GFXCLK_DPM_LEVELS - 1) +#define MAX_SMNCLK_DPM_LEVEL (NUM_SMNCLK_DPM_LEVELS - 1) +#define MAX_SOCCLK_DPM_LEVEL (NUM_SOCCLK_DPM_LEVELS - 1) +#define MAX_MP0CLK_DPM_LEVEL (NUM_MP0CLK_DPM_LEVELS - 1) +#define MAX_DCLK_DPM_LEVEL (NUM_DCLK_DPM_LEVELS - 1) +#define MAX_VCLK_DPM_LEVEL (NUM_VCLK_DPM_LEVELS - 1) +#define MAX_DCEFCLK_DPM_LEVEL (NUM_DCEFCLK_DPM_LEVELS - 1) +#define MAX_DISPCLK_DPM_LEVEL (NUM_DISPCLK_DPM_LEVELS - 1) +#define MAX_PIXCLK_DPM_LEVEL (NUM_PIXCLK_DPM_LEVELS - 1) +#define MAX_PHYCLK_DPM_LEVEL (NUM_PHYCLK_DPM_LEVELS - 1) +#define MAX_UCLK_DPM_LEVEL (NUM_UCLK_DPM_LEVELS - 1) +#define MAX_MP1CLK_DPM_LEVEL (NUM_MP1CLK_DPM_LEVELS - 1) +#define MAX_LINK_LEVEL (NUM_LINK_LEVELS - 1) + +//Gemini Modes +#define PPSMC_GeminiModeNone 0 //Single GPU board +#define PPSMC_GeminiModeMaster 1 //Master GPU on a Gemini board +#define PPSMC_GeminiModeSlave 2 //Slave GPU on a Gemini board + +// Feature Control Defines +// DPM +#define FEATURE_DPM_PREFETCHER_BIT 0 +#define FEATURE_DPM_GFXCLK_BIT 1 +#define FEATURE_DPM_GFX_PACE_BIT 2 +#define FEATURE_DPM_UCLK_BIT 3 +#define FEATURE_DPM_SOCCLK_BIT 4 +#define FEATURE_DPM_MP0CLK_BIT 5 +#define FEATURE_DPM_LINK_BIT 6 +#define FEATURE_DPM_DCEFCLK_BIT 7 +#define FEATURE_MEM_VDDCI_SCALING_BIT 8 +#define FEATURE_MEM_MVDD_SCALING_BIT 9 + +//Idle +#define FEATURE_DS_GFXCLK_BIT 10 +#define FEATURE_DS_SOCCLK_BIT 11 +#define FEATURE_DS_LCLK_BIT 12 +#define FEATURE_DS_DCEFCLK_BIT 13 +#define FEATURE_DS_UCLK_BIT 14 +#define FEATURE_GFX_ULV_BIT 15 +#define FEATURE_FW_DSTATE_BIT 16 +#define FEATURE_GFXOFF_BIT 17 +#define FEATURE_BACO_BIT 18 +#define FEATURE_VCN_PG_BIT 19 +#define FEATURE_JPEG_PG_BIT 20 +#define FEATURE_USB_PG_BIT 21 +#define FEATURE_RSMU_SMN_CG_BIT 22 +//Throttler/Response +#define FEATURE_PPT_BIT 23 +#define FEATURE_TDC_BIT 24 +#define FEATURE_GFX_EDC_BIT 25 +#define FEATURE_APCC_PLUS_BIT 26 +#define FEATURE_GTHR_BIT 27 +#define FEATURE_ACDC_BIT 28 +#define FEATURE_VR0HOT_BIT 29 +#define FEATURE_VR1HOT_BIT 30 +#define FEATURE_FW_CTF_BIT 31 +#define FEATURE_FAN_CONTROL_BIT 32 +#define FEATURE_THERMAL_BIT 33 +#define FEATURE_GFX_DCS_BIT 34 +//VF +#define FEATURE_RM_BIT 35 +#define FEATURE_LED_DISPLAY_BIT 36 +//Other +#define FEATURE_GFX_SS_BIT 37 +#define FEATURE_OUT_OF_BAND_MONITOR_BIT 38 +#define FEATURE_TEMP_DEPENDENT_VMIN_BIT 39 + +#define FEATURE_MMHUB_PG 40 +#define FEATURE_ATHUB_PG 41 +#define FEATURE_SPARE_42_BIT 42 +#define FEATURE_SPARE_43_BIT 43 +#define FEATURE_SPARE_44_BIT 44 +#define FEATURE_SPARE_45_BIT 45 +#define FEATURE_SPARE_46_BIT 46 +#define FEATURE_SPARE_47_BIT 47 +#define FEATURE_SPARE_48_BIT 48 +#define FEATURE_SPARE_49_BIT 49 +#define FEATURE_SPARE_50_BIT 50 +#define FEATURE_SPARE_51_BIT 51 +#define FEATURE_SPARE_52_BIT 52 +#define FEATURE_SPARE_53_BIT 53 +#define FEATURE_SPARE_54_BIT 54 +#define FEATURE_SPARE_55_BIT 55 +#define FEATURE_SPARE_56_BIT 56 +#define FEATURE_SPARE_57_BIT 57 +#define FEATURE_SPARE_58_BIT 58 +#define FEATURE_SPARE_59_BIT 59 +#define FEATURE_SPARE_60_BIT 60 +#define FEATURE_SPARE_61_BIT 61 +#define FEATURE_SPARE_62_BIT 62 +#define FEATURE_SPARE_63_BIT 63 +#define NUM_FEATURES 64 + +// Debug Overrides Bitmask +#define DPM_OVERRIDE_DISABLE_SOCCLK_PID 0x00000001 +#define DPM_OVERRIDE_DISABLE_UCLK_PID 0x00000002 +#define DPM_OVERRIDE_DISABLE_VOLT_LINK_VCN_SOCCLK 0x00000004 +#define DPM_OVERRIDE_ENABLE_FREQ_LINK_VCLK_SOCCLK 0x00000008 +#define DPM_OVERRIDE_ENABLE_FREQ_LINK_DCLK_SOCCLK 0x00000010 +#define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_SOCCLK 0x00000020 +#define DPM_OVERRIDE_ENABLE_FREQ_LINK_GFXCLK_UCLK 0x00000040 +#define DPM_OVERRIDE_DISABLE_VOLT_LINK_DCE_SOCCLK 0x00000080 +#define DPM_OVERRIDE_DISABLE_VOLT_LINK_MP0_SOCCLK 0x00000100 +#define DPM_OVERRIDE_DISABLE_DFLL_PLL_SHUTDOWN 0x00000200 +#define DPM_OVERRIDE_DISABLE_MEMORY_TEMPERATURE_READ 0x00000400 + +// VR Mapping Bit Defines +#define VR_MAPPING_VR_SELECT_MASK 0x01 +#define VR_MAPPING_VR_SELECT_SHIFT 0x00 + +#define VR_MAPPING_PLANE_SELECT_MASK 0x02 +#define VR_MAPPING_PLANE_SELECT_SHIFT 0x01 + +// PSI Bit Defines +#define PSI_SEL_VR0_PLANE0_PSI0 0x01 +#define PSI_SEL_VR0_PLANE0_PSI1 0x02 +#define PSI_SEL_VR0_PLANE1_PSI0 0x04 +#define PSI_SEL_VR0_PLANE1_PSI1 0x08 +#define PSI_SEL_VR1_PLANE0_PSI0 0x10 +#define PSI_SEL_VR1_PLANE0_PSI1 0x20 +#define PSI_SEL_VR1_PLANE1_PSI0 0x40 +#define PSI_SEL_VR1_PLANE1_PSI1 0x80 + +// Throttler Control/Status Bits +#define THROTTLER_PADDING_BIT 0 +#define THROTTLER_TEMP_EDGE_BIT 1 +#define THROTTLER_TEMP_HOTSPOT_BIT 2 +#define THROTTLER_TEMP_MEM_BIT 3 +#define THROTTLER_TEMP_VR_GFX_BIT 4 +#define THROTTLER_TEMP_VR_MEM0_BIT 5 +#define THROTTLER_TEMP_VR_MEM1_BIT 6 +#define THROTTLER_TEMP_VR_SOC_BIT 7 +#define THROTTLER_TEMP_LIQUID0_BIT 8 +#define THROTTLER_TEMP_LIQUID1_BIT 9 +#define THROTTLER_TEMP_PLX_BIT 10 +#define THROTTLER_TEMP_SKIN_BIT 11 +#define THROTTLER_TDC_GFX_BIT 12 +#define THROTTLER_TDC_SOC_BIT 13 +#define THROTTLER_PPT0_BIT 14 +#define THROTTLER_PPT1_BIT 15 +#define THROTTLER_PPT2_BIT 16 +#define THROTTLER_PPT3_BIT 17 +#define THROTTLER_FIT_BIT 18 +#define THROTTLER_PPM_BIT 19 +#define THROTTLER_APCC_BIT 20 + +// FW DState Features Control Bits +#define FW_DSTATE_SOC_ULV_BIT 0 +#define FW_DSTATE_G6_HSR_BIT 1 +#define FW_DSTATE_G6_PHY_VDDCI_OFF_BIT 2 +#define FW_DSTATE_MP0_DS_BIT 3 +#define FW_DSTATE_SMN_DS_BIT 4 +#define FW_DSTATE_MP1_DS_BIT 5 +#define FW_DSTATE_MP1_WHISPER_MODE_BIT 6 +#define FW_DSTATE_LIV_MIN_BIT 7 +#define FW_DSTATE_SOC_PLL_PWRDN_BIT 8 + +#define FW_DSTATE_SOC_ULV_MASK (1 << FW_DSTATE_SOC_ULV_BIT ) +#define FW_DSTATE_G6_HSR_MASK (1 << FW_DSTATE_G6_HSR_BIT ) +#define FW_DSTATE_G6_PHY_VDDCI_OFF_MASK (1 << FW_DSTATE_G6_PHY_VDDCI_OFF_BIT ) +#define FW_DSTATE_MP1_DS_MASK (1 << FW_DSTATE_MP1_DS_BIT ) +#define FW_DSTATE_MP0_DS_MASK (1 << FW_DSTATE_MP0_DS_BIT ) +#define FW_DSTATE_SMN_DS_MASK (1 << FW_DSTATE_SMN_DS_BIT ) +#define FW_DSTATE_MP1_WHISPER_MODE_MASK (1 << FW_DSTATE_MP1_WHISPER_MODE_BIT ) +#define FW_DSTATE_LIV_MIN_MASK (1 << FW_DSTATE_LIV_MIN_BIT ) +#define FW_DSTATE_SOC_PLL_PWRDN_MASK (1 << FW_DSTATE_SOC_PLL_PWRDN_BIT ) + +//I2C Interface + +#define NUM_I2C_CONTROLLERS 8 + +#define I2C_CONTROLLER_ENABLED 1 +#define I2C_CONTROLLER_DISABLED 0 + +#define MAX_SW_I2C_COMMANDS 8 + +typedef enum { + I2C_CONTROLLER_PORT_0 = 0, //CKSVII2C0 + I2C_CONTROLLER_PORT_1 = 1, //CKSVII2C1 + I2C_CONTROLLER_PORT_COUNT, +} I2cControllerPort_e; + +typedef enum { + I2C_CONTROLLER_NAME_VR_GFX = 0, + I2C_CONTROLLER_NAME_VR_SOC, + I2C_CONTROLLER_NAME_VR_VDDCI, + I2C_CONTROLLER_NAME_VR_MVDD, + I2C_CONTROLLER_NAME_LIQUID0, + I2C_CONTROLLER_NAME_LIQUID1, + I2C_CONTROLLER_NAME_PLX, + I2C_CONTROLLER_NAME_SPARE, + I2C_CONTROLLER_NAME_COUNT, +} I2cControllerName_e; + +typedef enum { + I2C_CONTROLLER_THROTTLER_TYPE_NONE = 0, + I2C_CONTROLLER_THROTTLER_VR_GFX, + I2C_CONTROLLER_THROTTLER_VR_SOC, + I2C_CONTROLLER_THROTTLER_VR_VDDCI, + I2C_CONTROLLER_THROTTLER_VR_MVDD, + I2C_CONTROLLER_THROTTLER_LIQUID0, + I2C_CONTROLLER_THROTTLER_LIQUID1, + I2C_CONTROLLER_THROTTLER_PLX, + I2C_CONTROLLER_THROTTLER_COUNT, +} I2cControllerThrottler_e; + +typedef enum { + I2C_CONTROLLER_PROTOCOL_VR_0, + I2C_CONTROLLER_PROTOCOL_VR_1, + I2C_CONTROLLER_PROTOCOL_TMP_0, + I2C_CONTROLLER_PROTOCOL_TMP_1, + I2C_CONTROLLER_PROTOCOL_SPARE_0, + I2C_CONTROLLER_PROTOCOL_SPARE_1, + I2C_CONTROLLER_PROTOCOL_COUNT, +} I2cControllerProtocol_e; + +typedef struct { + uint8_t Enabled; + uint8_t Speed; + uint8_t Padding[2]; + uint32_t SlaveAddress; + uint8_t ControllerPort; + uint8_t ControllerName; + uint8_t ThermalThrotter; + uint8_t I2cProtocol; +} I2cControllerConfig_t; + +typedef enum { + I2C_PORT_SVD_SCL = 0, + I2C_PORT_GPIO, +} I2cPort_e; + +typedef enum { + I2C_SPEED_FAST_50K = 0, //50 Kbits/s + I2C_SPEED_FAST_100K, //100 Kbits/s + I2C_SPEED_FAST_400K, //400 Kbits/s + I2C_SPEED_FAST_PLUS_1M, //1 Mbits/s (in fast mode) + I2C_SPEED_HIGH_1M, //1 Mbits/s (in high speed mode) + I2C_SPEED_HIGH_2M, //2.3 Mbits/s + I2C_SPEED_COUNT, +} I2cSpeed_e; + +typedef enum { + I2C_CMD_READ = 0, + I2C_CMD_WRITE, + I2C_CMD_COUNT, +} I2cCmdType_e; + +#define CMDCONFIG_STOP_BIT 0 +#define CMDCONFIG_RESTART_BIT 1 + +#define CMDCONFIG_STOP_MASK (1 << CMDCONFIG_STOP_BIT) +#define CMDCONFIG_RESTART_MASK (1 << CMDCONFIG_RESTART_BIT) + +typedef struct { + uint8_t RegisterAddr; ////only valid for write, ignored for read + uint8_t Cmd; //Read(0) or Write(1) + uint8_t Data; //Return data for read. Data to send for write + uint8_t CmdConfig; //Includes whether associated command should have a stop or restart command +} SwI2cCmd_t; //SW I2C Command Table + +typedef struct { + uint8_t I2CcontrollerPort; //CKSVII2C0(0) or //CKSVII2C1(1) + uint8_t I2CSpeed; //Slow(0) or Fast(1) + uint16_t SlaveAddress; + uint8_t NumCmds; //Number of commands + uint8_t Padding[3]; + + SwI2cCmd_t SwI2cCmds[MAX_SW_I2C_COMMANDS]; + + uint32_t MmHubPadding[8]; // SMU internal use + +} SwI2cRequest_t; // SW I2C Request Table + +//THis is aligned with RSMU PGFSM Register Mapping +typedef enum { + PG_DYNAMIC_MODE = 0, + PG_STATIC_MODE, +} PowerGatingMode_e; + +//This is aligned with RSMU PGFSM Register Mapping +typedef enum { + PG_POWER_DOWN = 0, + PG_POWER_UP, +} PowerGatingSettings_e; + +typedef struct { + uint32_t a; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable + uint32_t c; // store in IEEE float format in this variable +} QuadraticInt_t; + +typedef struct { + uint32_t m; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable +} LinearInt_t; + +typedef struct { + uint32_t a; // store in IEEE float format in this variable + uint32_t b; // store in IEEE float format in this variable + uint32_t c; // store in IEEE float format in this variable +} DroopInt_t; + +typedef enum { + GFXCLK_SOURCE_PLL = 0, + GFXCLK_SOURCE_DFLL, + GFXCLK_SOURCE_COUNT, +} GfxclkSrc_e; + +//Only Clks that have DPM descriptors are listed here +typedef enum { + PPCLK_GFXCLK = 0, + PPCLK_SOCCLK, + PPCLK_UCLK, + PPCLK_DCLK, + PPCLK_VCLK, + PPCLK_DCEFCLK, + PPCLK_DISPCLK, + PPCLK_PIXCLK, + PPCLK_PHYCLK, + PPCLK_COUNT, +} PPCLK_e; + +typedef enum { + POWER_SOURCE_AC, + POWER_SOURCE_DC, + POWER_SOURCE_COUNT, +} POWER_SOURCE_e; + +typedef enum { + PPT_THROTTLER_PPT0, + PPT_THROTTLER_PPT1, + PPT_THROTTLER_PPT2, + PPT_THROTTLER_PPT3, + PPT_THROTTLER_COUNT +} PPT_THROTTLER_e; + +typedef enum { + VOLTAGE_MODE_AVFS = 0, + VOLTAGE_MODE_AVFS_SS, + VOLTAGE_MODE_SS, + VOLTAGE_MODE_COUNT, +} VOLTAGE_MODE_e; + + +typedef enum { + AVFS_VOLTAGE_GFX = 0, + AVFS_VOLTAGE_SOC, + AVFS_VOLTAGE_COUNT, +} AVFS_VOLTAGE_TYPE_e; + +typedef enum { + UCLK_DIV_BY_1 = 0, + UCLK_DIV_BY_2, + UCLK_DIV_BY_4, + UCLK_DIV_BY_8, +} UCLK_DIV_e; + +typedef enum { + GPIO_INT_POLARITY_ACTIVE_LOW = 0, + GPIO_INT_POLARITY_ACTIVE_HIGH, +} GpioIntPolarity_e; + +typedef enum { + MEMORY_TYPE_GDDR6 = 0, + MEMORY_TYPE_HBM, +} MemoryType_e; + +typedef enum { + PWR_CONFIG_TDP = 0, + PWR_CONFIG_TGP, + PWR_CONFIG_TCP_ESTIMATED, + PWR_CONFIG_TCP_MEASURED, +} PwrConfig_e; + +typedef struct { + uint8_t VoltageMode; // 0 - AVFS only, 1- min(AVFS,SS), 2-SS only + uint8_t SnapToDiscrete; // 0 - Fine grained DPM, 1 - Discrete DPM + uint8_t NumDiscreteLevels; // Set to 2 (Fmin, Fmax) when using fine grained DPM, otherwise set to # discrete levels used + uint8_t Padding; + LinearInt_t ConversionToAvfsClk; // Transfer function to AVFS Clock (GHz->GHz) + QuadraticInt_t SsCurve; // Slow-slow curve (GHz->V) +} DpmDescriptor_t; + +typedef enum { + TEMP_EDGE, + TEMP_HOTSPOT, + TEMP_MEM, + TEMP_VR_GFX, + TEMP_VR_MEM0, + TEMP_VR_MEM1, + TEMP_VR_SOC, + TEMP_LIQUID0, + TEMP_LIQUID1, + TEMP_PLX, + TEMP_COUNT +} TEMP_e; + +//Out of band monitor status defines +//see SPEC //gpu/doc/soc_arch/spec/feature/SMBUS/SMBUS.xlsx +#define POWER_MANAGER_CONTROLLER_NOT_RUNNING 0 +#define POWER_MANAGER_CONTROLLER_RUNNING 1 + +#define POWER_MANAGER_CONTROLLER_BIT 0 +#define MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_BIT 8 +#define GPU_DIE_TEMPERATURE_THROTTLING_BIT 9 +#define HBM_DIE_TEMPERATURE_THROTTLING_BIT 10 +#define TGP_THROTTLING_BIT 11 +#define PCC_THROTTLING_BIT 12 +#define HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_BIT 13 +#define HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_BIT 14 + +#define POWER_MANAGER_CONTROLLER_MASK (1 << POWER_MANAGER_CONTROLLER_BIT ) +#define MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_MASK (1 << MAXIMUM_DPM_STATE_GFX_ENGINE_RESTRICTED_BIT ) +#define GPU_DIE_TEMPERATURE_THROTTLING_MASK (1 << GPU_DIE_TEMPERATURE_THROTTLING_BIT ) +#define HBM_DIE_TEMPERATURE_THROTTLING_MASK (1 << HBM_DIE_TEMPERATURE_THROTTLING_BIT ) +#define TGP_THROTTLING_MASK (1 << TGP_THROTTLING_BIT ) +#define PCC_THROTTLING_MASK (1 << PCC_THROTTLING_BIT ) +#define HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_MASK (1 << HBM_TEMPERATURE_EXCEEDING_TEMPERATURE_LIMIT_BIT ) +#define HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_MASK (1 << HBM_TEMPERATURE_EXCEEDING_MAX_MEMORY_TEMPERATURE_BIT) + +//This structure to be DMA to SMBUS Config register space +typedef struct { + uint8_t MinorInfoVersion; + uint8_t MajorInfoVersion; + uint8_t TableSize; + uint8_t Reserved; + + uint8_t Reserved1; + uint8_t RevID; + uint16_t DeviceID; + + uint16_t DieTemperatureLimit; + uint16_t FanTargetTemperature; + + uint16_t MemoryTemperatureLimit; + uint16_t Reserved2; + + uint16_t TGP; + uint16_t Reserved3; + + uint32_t DieTemperatureRegisterOffset; + + uint32_t Reserved4; + + uint32_t Reserved5; + + uint32_t Status; + + uint16_t DieTemperature; + uint16_t MemoryTemperature; + + uint32_t MmHubPadding[8]; // SMU internal use +} OutOfBandMonitor_t; + +typedef struct { + uint32_t Version; + + // SECTION: Feature Enablement + uint32_t FeaturesToRun[2]; + + // SECTION: Infrastructure Limits + uint16_t SocketPowerLimitAc[PPT_THROTTLER_COUNT]; + uint16_t SocketPowerLimitAcTau[PPT_THROTTLER_COUNT]; + uint16_t SocketPowerLimitDc[PPT_THROTTLER_COUNT]; + uint16_t SocketPowerLimitDcTau[PPT_THROTTLER_COUNT]; + + uint16_t TdcLimitSoc; // Amps + uint16_t TdcLimitSocTau; // Time constant of LPF in ms + uint16_t TdcLimitGfx; // Amps + uint16_t TdcLimitGfxTau; // Time constant of LPF in ms + + uint16_t TedgeLimit; // Celcius + uint16_t ThotspotLimit; // Celcius + uint16_t TmemLimit; // Celcius + uint16_t Tvr_gfxLimit; // Celcius + uint16_t Tvr_mem0Limit; // Celcius + uint16_t Tvr_mem1Limit; // Celcius + uint16_t Tvr_socLimit; // Celcius + uint16_t Tliquid0Limit; // Celcius + uint16_t Tliquid1Limit; // Celcius + uint16_t TplxLimit; // Celcius + uint32_t FitLimit; // Failures in time (failures per million parts over the defined lifetime) + + uint16_t PpmPowerLimit; // Switch this this power limit when temperature is above PpmTempThreshold + uint16_t PpmTemperatureThreshold; + + // SECTION: Throttler settings + uint32_t ThrottlerControlMask; // See Throtter masks defines + + // SECTION: FW DSTATE Settings + uint32_t FwDStateMask; // See FW DState masks defines + + // SECTION: ULV Settings + uint16_t UlvVoltageOffsetSoc; // In mV(Q2) + uint16_t UlvVoltageOffsetGfx; // In mV(Q2) + + uint8_t GceaLinkMgrIdleThreshold; //Set by SMU FW during enablment of SOC_ULV. Controls delay for GFX SDP port disconnection during idle events + uint8_t paddingRlcUlvParams[3]; + + uint8_t UlvSmnclkDid; //DID for ULV mode. 0 means CLK will not be modified in ULV. + uint8_t UlvMp1clkDid; //DID for ULV mode. 0 means CLK will not be modified in ULV. + uint8_t UlvGfxclkBypass; // 1 to turn off/bypass Gfxclk during ULV, 0 to leave Gfxclk on during ULV + uint8_t Padding234; + + uint16_t MinVoltageUlvGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX in ULV mode + uint16_t MinVoltageUlvSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC in ULV mode + + + // SECTION: Voltage Control Parameters + uint16_t MinVoltageGfx; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_GFX + uint16_t MinVoltageSoc; // In mV(Q2) Minimum Voltage ("Vmin") of VDD_SOC + uint16_t MaxVoltageGfx; // In mV(Q2) Maximum Voltage allowable of VDD_GFX + uint16_t MaxVoltageSoc; // In mV(Q2) Maximum Voltage allowable of VDD_SOC + + uint16_t LoadLineResistanceGfx; // In mOhms with 8 fractional bits + uint16_t LoadLineResistanceSoc; // In mOhms with 8 fractional bits + + //SECTION: DPM Config 1 + DpmDescriptor_t DpmDescriptor[PPCLK_COUNT]; + + uint16_t FreqTableGfx [NUM_GFXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableVclk [NUM_VCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDclk [NUM_DCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableSocclk [NUM_SOCCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableUclk [NUM_UCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDcefclk [NUM_DCEFCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTableDispclk [NUM_DISPCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTablePixclk [NUM_PIXCLK_DPM_LEVELS ]; // In MHz + uint16_t FreqTablePhyclk [NUM_PHYCLK_DPM_LEVELS ]; // In MHz + uint32_t Paddingclks[16]; + + uint16_t DcModeMaxFreq [PPCLK_COUNT ]; // In MHz + uint16_t Padding8_Clks; + + uint8_t FreqTableUclkDiv [NUM_UCLK_DPM_LEVELS ]; // 0:Div-1, 1:Div-1/2, 2:Div-1/4, 3:Div-1/8 + + // SECTION: DPM Config 2 + uint16_t Mp0clkFreq [NUM_MP0CLK_DPM_LEVELS]; // in MHz + uint16_t Mp0DpmVoltage [NUM_MP0CLK_DPM_LEVELS]; // mV(Q2) + uint16_t MemVddciVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + uint16_t MemMvddVoltage [NUM_UCLK_DPM_LEVELS]; // mV(Q2) + // GFXCLK DPM + uint16_t GfxclkFgfxoffEntry; // in Mhz + uint16_t GfxclkFinit; // in Mhz + uint16_t GfxclkFidle; // in MHz + uint16_t GfxclkSlewRate; // for PLL babystepping??? + uint16_t GfxclkFopt; // in Mhz + uint8_t Padding567[2]; + uint16_t GfxclkDsMaxFreq; // in MHz + uint8_t GfxclkSource; // 0 = PLL, 1 = DFLL + uint8_t Padding456; + + // UCLK section + uint8_t LowestUclkReservedForUlv; // Set this to 1 if UCLK DPM0 is reserved for ULV-mode only + uint8_t paddingUclk[3]; + + uint8_t MemoryType; // 0-GDDR6, 1-HBM + uint8_t MemoryChannels; + uint8_t PaddingMem[2]; + + // Link DPM Settings + uint8_t PcieGenSpeed[NUM_LINK_LEVELS]; ///< 0:PciE-gen1 1:PciE-gen2 2:PciE-gen3 3:PciE-gen4 + uint8_t PcieLaneCount[NUM_LINK_LEVELS]; ///< 1=x1, 2=x2, 3=x4, 4=x8, 5=x12, 6=x16 + uint16_t LclkFreq[NUM_LINK_LEVELS]; + + // GFXCLK Thermal DPM (formerly 'Boost' Settings) + uint16_t EnableTdpm; + uint16_t TdpmHighHystTemperature; + uint16_t TdpmLowHystTemperature; + uint16_t GfxclkFreqHighTempLimit; // High limit on GFXCLK when temperature is high, for reliability. + + // SECTION: Fan Control + uint16_t FanStopTemp; //Celcius + uint16_t FanStartTemp; //Celcius + + uint16_t FanGainEdge; + uint16_t FanGainHotspot; + uint16_t FanGainLiquid0; + uint16_t FanGainLiquid1; + uint16_t FanGainVrGfx; + uint16_t FanGainVrSoc; + uint16_t FanGainVrMem0; + uint16_t FanGainVrMem1; + uint16_t FanGainPlx; + uint16_t FanGainMem; + uint16_t FanPwmMin; + uint16_t FanAcousticLimitRpm; + uint16_t FanThrottlingRpm; + uint16_t FanMaximumRpm; + uint16_t FanTargetTemperature; + uint16_t FanTargetGfxclk; + uint8_t FanTempInputSelect; + uint8_t FanPadding; + uint8_t FanZeroRpmEnable; + uint8_t FanTachEdgePerRev; + //uint8_t padding8_Fan[2]; + + // The following are AFC override parameters. Leave at 0 to use FW defaults. + int16_t FuzzyFan_ErrorSetDelta; + int16_t FuzzyFan_ErrorRateSetDelta; + int16_t FuzzyFan_PwmSetDelta; + uint16_t FuzzyFan_Reserved; + + + // SECTION: AVFS + // Overrides + uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; + uint8_t Padding8_Avfs[2]; + + QuadraticInt_t qAvfsGb[AVFS_VOLTAGE_COUNT]; // GHz->V Override of fused curve + DroopInt_t dBtcGbGfxPll; // GHz->V BtcGb + DroopInt_t dBtcGbGfxDfll; // GHz->V BtcGb + DroopInt_t dBtcGbSoc; // GHz->V BtcGb + LinearInt_t qAgingGb[AVFS_VOLTAGE_COUNT]; // GHz->V + + QuadraticInt_t qStaticVoltageOffset[AVFS_VOLTAGE_COUNT]; // GHz->V + + uint16_t DcTol[AVFS_VOLTAGE_COUNT]; // mV Q2 + + uint8_t DcBtcEnabled[AVFS_VOLTAGE_COUNT]; + uint8_t Padding8_GfxBtc[2]; + + uint16_t DcBtcMin[AVFS_VOLTAGE_COUNT]; // mV Q2 + uint16_t DcBtcMax[AVFS_VOLTAGE_COUNT]; // mV Q2 + + // SECTION: Advanced Options + uint32_t DebugOverrides; + QuadraticInt_t ReservedEquation0; + QuadraticInt_t ReservedEquation1; + QuadraticInt_t ReservedEquation2; + QuadraticInt_t ReservedEquation3; + + // Total Power configuration, use defines from PwrConfig_e + uint8_t TotalPowerConfig; //0-TDP, 1-TGP, 2-TCP Estimated, 3-TCP Measured + uint8_t TotalPowerSpare1; + uint16_t TotalPowerSpare2; + + // APCC Settings + uint16_t PccThresholdLow; + uint16_t PccThresholdHigh; + uint32_t PaddingAPCC[6]; //FIXME pending SPEC + + // Temperature Dependent Vmin + uint16_t VDDGFX_TVmin; //Celcius + uint16_t VDDSOC_TVmin; //Celcius + uint16_t VDDGFX_Vmin_HiTemp; // mV Q2 + uint16_t VDDGFX_Vmin_LoTemp; // mV Q2 + uint16_t VDDSOC_Vmin_HiTemp; // mV Q2 + uint16_t VDDSOC_Vmin_LoTemp; // mV Q2 + + uint16_t VDDGFX_TVminHystersis; // Celcius + uint16_t VDDSOC_TVminHystersis; // Celcius + + // BTC Setting + uint32_t BtcConfig; + + // SECTION: Board Reserved + uint32_t Reserved[14]; + + // SECTION: BOARD PARAMETERS + // I2C Control + I2cControllerConfig_t I2cControllers[NUM_I2C_CONTROLLERS]; + + // SVI2 Board Parameters + uint16_t MaxVoltageStepGfx; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. + uint16_t MaxVoltageStepSoc; // In mV(Q2) Max voltage step that SMU will request. Multiple steps are taken if voltage change exceeds this value. + + uint8_t VddGfxVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddSocVrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem0VrMapping; // Use VR_MAPPING* bitfields + uint8_t VddMem1VrMapping; // Use VR_MAPPING* bitfields + + uint8_t GfxUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t SocUlvPhaseSheddingMask; // set this to 1 to set PSI0/1 to 1 in ULV mode + uint8_t ExternalSensorPresent; // External RDI connected to TMON (aka TEMP IN) + uint8_t Padding8_V; + + // Telemetry Settings + uint16_t GfxMaxCurrent; // in Amps + int8_t GfxOffset; // in Amps + uint8_t Padding_TelemetryGfx; + + uint16_t SocMaxCurrent; // in Amps + int8_t SocOffset; // in Amps + uint8_t Padding_TelemetrySoc; + + uint16_t Mem0MaxCurrent; // in Amps + int8_t Mem0Offset; // in Amps + uint8_t Padding_TelemetryMem0; + + uint16_t Mem1MaxCurrent; // in Amps + int8_t Mem1Offset; // in Amps + uint8_t Padding_TelemetryMem1; + + // GPIO Settings + uint8_t AcDcGpio; // GPIO pin configured for AC/DC switching + uint8_t AcDcPolarity; // GPIO polarity for AC/DC switching + uint8_t VR0HotGpio; // GPIO pin configured for VR0 HOT event + uint8_t VR0HotPolarity; // GPIO polarity for VR0 HOT event + + uint8_t VR1HotGpio; // GPIO pin configured for VR1 HOT event + uint8_t VR1HotPolarity; // GPIO polarity for VR1 HOT event + uint8_t GthrGpio; // GPIO pin configured for GTHR Event + uint8_t GthrPolarity; // replace GPIO polarity for GTHR + + // LED Display Settings + uint8_t LedPin0; // GPIO number for LedPin[0] + uint8_t LedPin1; // GPIO number for LedPin[1] + uint8_t LedPin2; // GPIO number for LedPin[2] + uint8_t padding8_4; + + // GFXCLK PLL Spread Spectrum + uint8_t PllGfxclkSpreadEnabled; // on or off + uint8_t PllGfxclkSpreadPercent; // Q4.4 + uint16_t PllGfxclkSpreadFreq; // kHz + + // GFXCLK DFLL Spread Spectrum + uint8_t DfllGfxclkSpreadEnabled; // on or off + uint8_t DfllGfxclkSpreadPercent; // Q4.4 + uint16_t DfllGfxclkSpreadFreq; // kHz + + // UCLK Spread Spectrum + uint8_t UclkSpreadEnabled; // on or off + uint8_t UclkSpreadPercent; // Q4.4 + uint16_t UclkSpreadFreq; // kHz + + // SOCCLK Spread Spectrum + uint8_t SoclkSpreadEnabled; // on or off + uint8_t SocclkSpreadPercent; // Q4.4 + uint16_t SocclkSpreadFreq; // kHz + + // Total board power + uint16_t TotalBoardPower; //Only needed for TCP Estimated case, where TCP = TGP+Total Board Power + uint16_t BoardPadding; + + // Mvdd Svi2 Div Ratio Setting + uint32_t MvddRatio; // This is used for MVDD Vid workaround. It has 16 fractional bits (Q16.16) + + uint32_t BoardReserved[9]; + + // Padding for MMHUB - do not modify this + uint32_t MmHubPadding[8]; // SMU internal use + +} PPTable_t; + +typedef struct { + // Time constant parameters for clock averages in ms + uint16_t GfxclkAverageLpfTau; + uint16_t SocclkAverageLpfTau; + uint16_t UclkAverageLpfTau; + uint16_t GfxActivityLpfTau; + uint16_t UclkActivityLpfTau; + + uint16_t Padding; + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use +} DriverSmuConfig_t; + +typedef struct { + + uint16_t GfxclkFmin; // MHz + uint16_t GfxclkFmax; // MHz + uint16_t GfxclkFreq1; // MHz + uint16_t GfxclkVolt1; // mV (Q2) + uint16_t GfxclkFreq2; // MHz + uint16_t GfxclkVolt2; // mV (Q2) + uint16_t GfxclkFreq3; // MHz + uint16_t GfxclkVolt3; // mV (Q2) + uint16_t UclkFmax; // MHz + int16_t OverDrivePct; // % + uint16_t FanMaximumRpm; + uint16_t FanMinimumPwm; + uint16_t FanTargetTemperature; // Degree Celcius + uint16_t MaxOpTemp; // Degree Celcius + uint16_t FanZeroRpmEnable; + uint16_t Padding; + + uint32_t MmHubPadding[8]; // SMU internal use + +} OverDriveTable_t; + +typedef struct { + uint16_t CurrClock[PPCLK_COUNT]; + uint16_t AverageGfxclkFrequency; + uint16_t AverageSocclkFrequency; + uint16_t AverageUclkFrequency ; + uint16_t AverageGfxActivity ; + uint16_t AverageUclkActivity ; + uint8_t CurrSocVoltageOffset ; + uint8_t CurrGfxVoltageOffset ; + uint8_t CurrMemVidOffset ; + uint8_t Padding8 ; + uint16_t CurrSocketPower ; + uint16_t TemperatureEdge ; + uint16_t TemperatureHotspot ; + uint16_t TemperatureMem ; + uint16_t TemperatureVrGfx ; + uint16_t TemperatureVrMem0 ; + uint16_t TemperatureVrMem1 ; + uint16_t TemperatureVrSoc ; + uint16_t TemperatureLiquid0 ; + uint16_t TemperatureLiquid1 ; + uint16_t TemperaturePlx ; + uint16_t Padding16 ; + uint32_t ThrottlerStatus ; + + uint8_t LinkDpmLevel; + uint8_t Padding[3]; + + // Padding - ignore + uint32_t MmHubPadding[8]; // SMU internal use +} SmuMetrics_t; + +typedef struct { + uint16_t MinClock; // This is either DCEFCLK or SOCCLK (in MHz) + uint16_t MaxClock; // This is either DCEFCLK or SOCCLK (in MHz) + uint16_t MinUclk; + uint16_t MaxUclk; + + uint8_t WmSetting; + uint8_t Padding[3]; + + uint32_t MmHubPadding[8]; // SMU internal use +} WatermarkRowGeneric_t; + +#define NUM_WM_RANGES 4 + +typedef enum { + WM_SOCCLK = 0, + WM_DCEFCLK, + WM_COUNT, +} WM_CLOCK_e; + +typedef struct { + // Watermarks + WatermarkRowGeneric_t WatermarkRow[WM_COUNT][NUM_WM_RANGES]; + + uint32_t MmHubPadding[8]; // SMU internal use +} Watermarks_t; + +typedef struct { + uint16_t avgPsmCount[36]; + uint16_t minPsmCount[36]; + float avgPsmVoltage[36]; + float minPsmVoltage[36]; + + uint32_t MmHubPadding[8]; // SMU internal use +} AvfsDebugTable_t; + +typedef struct { + uint8_t AvfsVersion; + uint8_t Padding; + + uint8_t AvfsEn[AVFS_VOLTAGE_COUNT]; + + uint8_t OverrideVFT[AVFS_VOLTAGE_COUNT]; + uint8_t OverrideAvfsGb[AVFS_VOLTAGE_COUNT]; + + uint8_t OverrideTemperatures[AVFS_VOLTAGE_COUNT]; + uint8_t OverrideVInversion[AVFS_VOLTAGE_COUNT]; + uint8_t OverrideP2V[AVFS_VOLTAGE_COUNT]; + uint8_t OverrideP2VCharzFreq[AVFS_VOLTAGE_COUNT]; + + int32_t VFT0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 + int32_t VFT0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t VFT0_b[AVFS_VOLTAGE_COUNT]; // Q32 + + int32_t VFT1_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 + int32_t VFT1_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t VFT1_b[AVFS_VOLTAGE_COUNT]; // Q32 + + int32_t VFT2_m1[AVFS_VOLTAGE_COUNT]; // Q8.16 + int32_t VFT2_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t VFT2_b[AVFS_VOLTAGE_COUNT]; // Q32 + + int32_t AvfsGb0_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 + int32_t AvfsGb0_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t AvfsGb0_b[AVFS_VOLTAGE_COUNT]; // Q32 + + int32_t AcBtcGb_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 + int32_t AcBtcGb_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t AcBtcGb_b[AVFS_VOLTAGE_COUNT]; // Q32 + + uint32_t AvfsTempCold[AVFS_VOLTAGE_COUNT]; + uint32_t AvfsTempMid[AVFS_VOLTAGE_COUNT]; + uint32_t AvfsTempHot[AVFS_VOLTAGE_COUNT]; + + uint32_t VInversion[AVFS_VOLTAGE_COUNT]; // in mV with 2 fractional bits + + + int32_t P2V_m1[AVFS_VOLTAGE_COUNT]; // Q8.24 + int32_t P2V_m2[AVFS_VOLTAGE_COUNT]; // Q12.12 + int32_t P2V_b[AVFS_VOLTAGE_COUNT]; // Q32 + + uint32_t P2VCharzFreq[AVFS_VOLTAGE_COUNT]; // in 10KHz units + + uint32_t EnabledAvfsModules[2]; //NV10 - 36 AVFS modules + + uint32_t MmHubPadding[8]; // SMU internal use +} AvfsFuseOverride_t; + +typedef struct { + + uint8_t Gfx_ActiveHystLimit; + uint8_t Gfx_IdleHystLimit; + uint8_t Gfx_FPS; + uint8_t Gfx_MinActiveFreqType; + uint8_t Gfx_BoosterFreqType; + uint8_t Gfx_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. + uint16_t Gfx_MinActiveFreq; // MHz + uint16_t Gfx_BoosterFreq; // MHz + uint16_t Gfx_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Gfx_PD_Data_limit_a; // Q16 + uint32_t Gfx_PD_Data_limit_b; // Q16 + uint32_t Gfx_PD_Data_limit_c; // Q16 + uint32_t Gfx_PD_Data_error_coeff; // Q16 + uint32_t Gfx_PD_Data_error_rate_coeff; // Q16 + + uint8_t Soc_ActiveHystLimit; + uint8_t Soc_IdleHystLimit; + uint8_t Soc_FPS; + uint8_t Soc_MinActiveFreqType; + uint8_t Soc_BoosterFreqType; + uint8_t Soc_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. + uint16_t Soc_MinActiveFreq; // MHz + uint16_t Soc_BoosterFreq; // MHz + uint16_t Soc_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Soc_PD_Data_limit_a; // Q16 + uint32_t Soc_PD_Data_limit_b; // Q16 + uint32_t Soc_PD_Data_limit_c; // Q16 + uint32_t Soc_PD_Data_error_coeff; // Q16 + uint32_t Soc_PD_Data_error_rate_coeff; // Q16 + + uint8_t Mem_ActiveHystLimit; + uint8_t Mem_IdleHystLimit; + uint8_t Mem_FPS; + uint8_t Mem_MinActiveFreqType; + uint8_t Mem_BoosterFreqType; + uint8_t Mem_MinFreqStep; // Minimum delta between current and target frequeny in order for FW to change clock. + uint16_t Mem_MinActiveFreq; // MHz + uint16_t Mem_BoosterFreq; // MHz + uint16_t Mem_PD_Data_time_constant; // Time constant of PD controller in ms + uint32_t Mem_PD_Data_limit_a; // Q16 + uint32_t Mem_PD_Data_limit_b; // Q16 + uint32_t Mem_PD_Data_limit_c; // Q16 + uint32_t Mem_PD_Data_error_coeff; // Q16 + uint32_t Mem_PD_Data_error_rate_coeff; // Q16 + + uint32_t Mem_UpThreshold_Limit; // Q16 + uint8_t Mem_UpHystLimit; + uint8_t Mem_DownHystLimit; + uint16_t Mem_Fps; + + uint32_t MmHubPadding[8]; // SMU internal use + +} DpmActivityMonitorCoeffInt_t; + + +// Workload bits +#define WORKLOAD_PPLIB_DEFAULT_BIT 0 +#define WORKLOAD_PPLIB_FULL_SCREEN_3D_BIT 1 +#define WORKLOAD_PPLIB_POWER_SAVING_BIT 2 +#define WORKLOAD_PPLIB_VIDEO_BIT 3 +#define WORKLOAD_PPLIB_VR_BIT 4 +#define WORKLOAD_PPLIB_COMPUTE_BIT 5 +#define WORKLOAD_PPLIB_CUSTOM_BIT 6 +#define WORKLOAD_PPLIB_COUNT 7 + + +// These defines are used with the following messages: +// SMC_MSG_TransferTableDram2Smu +// SMC_MSG_TransferTableSmu2Dram + +// Table transfer status +#define TABLE_TRANSFER_OK 0x0 +#define TABLE_TRANSFER_FAILED 0xFF + +// Table types +#define TABLE_PPTABLE 0 +#define TABLE_WATERMARKS 1 +#define TABLE_AVFS 2 +#define TABLE_AVFS_PSM_DEBUG 3 +#define TABLE_AVFS_FUSE_OVERRIDE 4 +#define TABLE_PMSTATUSLOG 5 +#define TABLE_SMU_METRICS 6 +#define TABLE_DRIVER_SMU_CONFIG 7 +#define TABLE_ACTIVITY_MONITOR_COEFF 8 +#define TABLE_OVERDRIVE 9 +#define TABLE_I2C_COMMANDS 10 +#define TABLE_PACE 11 +#define TABLE_COUNT 12 + +//RLC Pace Table total number of levels +#define RLC_PACE_TABLE_NUM_LEVELS 16 +#define RLC_PACE_RATIO_NUM_LEVELS 8 + +typedef struct { + uint8_t ByteRatioLow; + uint8_t FlopsRatioLow; + uint8_t ByteRatioHigh; + uint8_t FlopsRatioHigh; +} RlcPaceFlopsPerByte_t; + +typedef struct { + RlcPaceFlopsPerByte_t FlopsPerByteTable[RLC_PACE_RATIO_NUM_LEVELS]; + + uint32_t MmHubPadding[8]; // SMU internal use +} RlcPaceFlopsPerByteOverride_t; + +// These defines are used with the SMC_MSG_SetUclkFastSwitch message. +#define UCLK_SWITCH_SLOW 0 +#define UCLK_SWITCH_FAST 1 +#endif diff --git a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c index d2eeb6240484..376b10f0b2d9 100644 --- a/drivers/gpu/drm/amd/powerplay/smu_v11_0.c +++ b/drivers/gpu/drm/amd/powerplay/smu_v11_0.c @@ -27,7 +27,7 @@ #include "atomfirmware.h" #include "amdgpu_atomfirmware.h" #include "smu_v11_0.h" -#include "smu11_driver_if.h" +#include "smu_11_0_driver_if.h" #include "soc15_common.h" #include "atom.h" #include "vega20_ppt.h"