From: Florian Fainelli Date: Fri, 21 Sep 2018 23:43:59 +0000 (-0700) Subject: net: dsa: b53: Also include SGMII for mac_config and mac_link_state X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=55a4d2eac327fca4b22544f98d86d6e7b7981913;p=openwrt%2Fstaging%2Fblogic.git net: dsa: b53: Also include SGMII for mac_config and mac_link_state In both 802.3z and SGMII modes we need to configure the MAC accordingly to flip between Fiber and SGMII modes, and we need to read the MAC status from the SGMII in-band control word. Fixes: 0e01491de646 ("net: dsa: b53: Add SerDes support") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index dbf5b86a07fe..700d86dd5e13 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -1172,8 +1172,9 @@ int b53_phylink_mac_link_state(struct dsa_switch *ds, int port, struct b53_device *dev = ds->priv; int ret = -EOPNOTSUPP; - if (phy_interface_mode_is_8023z(state->interface) && - dev->ops->serdes_link_state) + if ((phy_interface_mode_is_8023z(state->interface) || + state->interface == PHY_INTERFACE_MODE_SGMII) && + dev->ops->serdes_link_state) ret = dev->ops->serdes_link_state(dev, port, state); return ret; @@ -1195,8 +1196,9 @@ void b53_phylink_mac_config(struct dsa_switch *ds, int port, return; } - if (phy_interface_mode_is_8023z(state->interface) && - dev->ops->serdes_config) + if ((phy_interface_mode_is_8023z(state->interface) || + state->interface == PHY_INTERFACE_MODE_SGMII) && + dev->ops->serdes_config) dev->ops->serdes_config(dev, port, mode, state); } EXPORT_SYMBOL(b53_phylink_mac_config);