From: Alexander Duyck Date: Tue, 27 Oct 2009 23:52:50 +0000 (+0000) Subject: igb: cleanup whitespace issues in igb_main.c X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=559e9c4987e90e278db347b0a2ba423e7e496fd3;p=openwrt%2Fstaging%2Fblogic.git igb: cleanup whitespace issues in igb_main.c This patch goes through and cleans up whitespace issues in igb_main.c to help improve readability. Signed-off-by: Alexander Duyck Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1a6c07455052..b044c985df0b 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1006,7 +1006,6 @@ static void igb_release_hw_control(struct igb_adapter *adapter) ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); } - /** * igb_get_hw_control - get control of the h/w from f/w * @adapter: address of board private structure @@ -1067,7 +1066,6 @@ static void igb_configure(struct igb_adapter *adapter) * igb_up - Open the interface and prepare it to handle traffic * @adapter: board private structure **/ - int igb_up(struct igb_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; @@ -1288,7 +1286,7 @@ void igb_reset(struct igb_adapter *adapter) } static const struct net_device_ops igb_netdev_ops = { - .ndo_open = igb_open, + .ndo_open = igb_open, .ndo_stop = igb_close, .ndo_start_xmit = igb_xmit_frame_adv, .ndo_get_stats = igb_get_stats, @@ -1444,7 +1442,6 @@ static int __devinit igb_probe(struct pci_dev *pdev, netdev->features |= NETIF_F_IPV6_CSUM; netdev->features |= NETIF_F_TSO; netdev->features |= NETIF_F_TSO6; - netdev->features |= NETIF_F_GRO; netdev->vlan_features |= NETIF_F_TSO; @@ -1569,7 +1566,6 @@ static int __devinit igb_probe(struct pci_dev *pdev, } #endif - switch (hw->mac.type) { case e1000_82576: /* @@ -1624,8 +1620,8 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* print bus type/speed/width info */ dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n", netdev->name, - ((hw->bus.speed == e1000_bus_speed_2500) - ? "2.5Gb/s" : "unknown"), + ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" : + "unknown"), ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" : (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" : @@ -1658,8 +1654,8 @@ err_sw_init: err_ioremap: free_netdev(netdev); err_alloc_etherdev: - pci_release_selected_regions(pdev, pci_select_bars(pdev, - IORESOURCE_MEM)); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); err_pci_reg: err_dma: pci_disable_device(pdev); @@ -1723,11 +1719,12 @@ static void __devexit igb_remove(struct pci_dev *pdev) dev_info(&pdev->dev, "IOV Disabled\n"); } #endif + iounmap(hw->hw_addr); if (hw->flash_address) iounmap(hw->flash_address); - pci_release_selected_regions(pdev, pci_select_bars(pdev, - IORESOURCE_MEM)); + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); free_netdev(netdev); @@ -2288,9 +2285,7 @@ void igb_setup_rctl(struct igb_adapter *adapter) */ rctl |= E1000_RCTL_SECRC; - /* - * disable store bad packets and clear size bits. - */ + /* disable store bad packets and clear size bits. */ rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256); /* enable LPE to prevent packets larger than max_frame_size */ @@ -2916,7 +2911,8 @@ static void igb_watchdog(unsigned long data) static void igb_watchdog_task(struct work_struct *work) { struct igb_adapter *adapter = container_of(work, - struct igb_adapter, watchdog_task); + struct igb_adapter, + watchdog_task); struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; struct igb_ring *tx_ring = adapter->tx_ring; @@ -2935,14 +2931,14 @@ static void igb_watchdog_task(struct work_struct *work) /* Links status message must follow this format */ printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, " "Flow Control: %s\n", - netdev->name, - adapter->link_speed, - adapter->link_duplex == FULL_DUPLEX ? + netdev->name, + adapter->link_speed, + adapter->link_duplex == FULL_DUPLEX ? "Full Duplex" : "Half Duplex", - ((ctrl & E1000_CTRL_TFCE) && (ctrl & - E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl & - E1000_CTRL_RFCE) ? "RX" : ((ctrl & - E1000_CTRL_TFCE) ? "TX" : "None"))); + ((ctrl & E1000_CTRL_TFCE) && + (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" : + ((ctrl & E1000_CTRL_RFCE) ? "RX" : + ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None"))); /* tweak tx_queue_len according to speed/duplex and * adjust the timeout factor */ @@ -3724,6 +3720,7 @@ static int igb_change_mtu(struct net_device *netdev, int new_mtu) /* igb_down has a dependency on max_frame_size */ adapter->max_frame_size = max_frame; + /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next * larger slab size.