From: Marty Plummer Date: Fri, 14 Apr 2017 17:08:17 +0000 (-0500) Subject: ar71xx: add support for EnGenius ENS202EXT X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=558d86923e3f5a62577036aa2bace2532163ca13;p=openwrt%2Fstaging%2Fynezz.git ar71xx: add support for EnGenius ENS202EXT EnGenius ENS202EXT is an outdoor wireless access point with 2-port 10/100 switch, detachable antennas and proprietery PoE. The device is based on Qualcomm/Atheros AR9341 v1. Specifications: - 535/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM - 16 MB of FLASH - UART (J1) header on PCB (unpopulated) - 2x 10/100 Mbps Ethernet - 2.4 GHz, up to 26dBm - 2x external, detachable antennas - 7x LED, 1x button Flash instructions: You have three options: - Use the vendor firmware upgrade page on the web interface and give it the factory.img. This is the easiest way to go about it. - If you have serial access during u-boot, interrupt the normal boot (any key before timeout) and run 'run failsafe_boot'; this will bring you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've bricked the normal firmware. - Use the vendor's management cli, which can be accessed via telnet with the same credentials as the web login (default admin:admin), then issue the following commands: *** Hi admin, welcome to use cli(V-1.6.7) *** ---========= Commands Help =========--- stat -- Status sys -- System wless2 -- 2.4G-Wireless mgmt -- Management tree -- Tree help -- Help reboot -- Reboot ens202ext>mgmt Management ---========= Commands Help =========--- admin -- Administration mvlan -- Management VLAN settings snmp -- SNMP settings backup -- Backup/Restore settings autorb -- Auto reboot settings fwgrade -- Firmware upgrade time -- Time settings wifisch -- Wifi schedule log -- Log diag -- Diagnostics disc -- Device Discovery logout -- Logout help -- Help exit -- Exit ens202ext/mgmt>fwgrade Management --> Firmware upgrade ---========= Commands Help =========--- fwup -- Firmware upgrade help -- Help exit -- Exit ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin Signed-off-by: Marty Plummer --- diff --git a/package/boot/uboot-envtools/files/ar71xx b/package/boot/uboot-envtools/files/ar71xx index 7b348ddc9b..b920bb946b 100644 --- a/package/boot/uboot-envtools/files/ar71xx +++ b/package/boot/uboot-envtools/files/ar71xx @@ -27,6 +27,7 @@ cpe870|\ cr3000|\ cr5000|\ eap300v2|\ +ens202ext|\ gl-ar300m|\ hornet-ub|\ hornet-ub-x2|\ diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 59a14271a7..7248ab1941 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -220,6 +220,13 @@ eap300v2) ucidef_set_led_netdev "lan" "LAN" "engenius:blue:lan" "eth0" ucidef_set_led_wlan "wlan" "WLAN" "engenius:blue:wlan" "phy0tpt" ;; +ens202ext) + ucidef_set_rssimon "wlan0" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "engenius:amber:wlan1" "wlan0" "1" "100" "0" "13" + ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "engenius:red:wlan2" "wlan0" "25" "100" "-39" "13" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "engenius:amber:wlan3" "wlan0" "50" "100" "-59" "13" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "engenius:green:wlan4" "wlan0" "75" "100" "-79" "13" + ;; f9k1115v2) ucidef_set_led_usbdev "usb2" "USB2" "belkin:green:usb2" "1-1" ;; diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index ef48b133bd..ae43351c6a 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -175,6 +175,9 @@ get_status_led() { eap300v2) status_led="engenius:blue:power" ;; + ens202ext) + status_led="engenius:amber:power" + ;; eap7660d) status_led="$board:green:ds4" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index db5de727c1..e781c6ee7e 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -625,6 +625,9 @@ ar71xx_board_detect() { *"EmbWir-Dorin-Router") name="ew-dorin-router" ;; + *"ENS202EXT") + name="ens202ext" + ;; *"EPG5000") name="epg5000" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 848aeffacc..16701f64ca 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -236,6 +236,7 @@ platform_check_image() { dr531|\ dragino2|\ ebr-2310-c1|\ + ens202ext|\ epg5000|\ esr1750|\ esr900|\ @@ -757,7 +758,8 @@ platform_do_upgrade() { platform_do_upgrade_allnet "0x9f080000" "$ARGV" ;; cap4200ag|\ - eap300v2) + eap300v2|\ + ens202ext) platform_do_upgrade_allnet "0xbf0a0000" "$ARGV" ;; dir-825-b1|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 298b3ebcbb..43a487d20e 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -100,6 +100,7 @@ CONFIG_ATH79_MACH_EAP300V2=y CONFIG_ATH79_MACH_EAP7660D=y CONFIG_ATH79_MACH_EL_M150=y CONFIG_ATH79_MACH_EL_MINI=y +CONFIG_ATH79_MACH_ENS202EXT=y CONFIG_ATH79_MACH_EPG5000=y CONFIG_ATH79_MACH_ESR1750=y CONFIG_ATH79_MACH_ESR900=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 70c27a65be..c18eec557d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -767,6 +767,15 @@ config ATH79_MACH_EAP120 select ATH79_DEV_M25P80 select ATH79_DEV_WMAC +config ATH79_MACH_ENS202EXT + bool "EnGenius ENS202EXT support" + select SOC_AR934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_EAP300V2 bool "EnGenius EAP300 v2 support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index bc3f6819be..55c5a2a939 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -104,6 +104,7 @@ obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o +obj-$(CONFIG_ATH79_MACH_ENS202EXT) += mach-ens202ext.o obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c new file mode 100644 index 0000000000..07dbc2e69d --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c @@ -0,0 +1,124 @@ +/* + * EnGenius ENS202EXT board support + * + * Copyright (C) 2017 Marty Plummer + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "nvram.h" + +#define ENS202_GPIO_LED_WLAN4 0 +#define ENS202_GPIO_LED_POWER 14 +#define ENS202_GPIO_LED_WLAN2 16 +#define ENS202_GPIO_LED_WLAN3 17 +#define ENS202_GPIO_LED_WLAN1 18 + +#define ENS202_GPIO_BTN_RESET 1 + +#define ENS202_KEYS_POLL_INTERVAL 20 /* msecs */ +#define ENS202_KEYS_DEBOUNCE_INTERVAL (3 * ENS202_KEYS_POLL_INTERVAL) + +static struct gpio_led ens202_leds_gpio[] __initdata = { + { + .name = "engenius:amber:wlan1", + .gpio = ENS202_GPIO_LED_WLAN1, + .active_low = 1, + }, { + .name = "engenius:red:wlan2", + .gpio = ENS202_GPIO_LED_WLAN2, + .active_low = 1, + }, { + .name = "engenius:amber:wlan3", + .gpio = ENS202_GPIO_LED_WLAN3, + .active_low = 1, + }, { + .name = "engenius:green:wlan4", + .gpio = ENS202_GPIO_LED_WLAN4, + .active_low = 1, + }, { + .name = "engenius:amber:power", + .gpio = ENS202_GPIO_LED_POWER, + .active_low = 1, + } +}; + +static struct gpio_keys_button ens202_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = ENS202_KEYS_DEBOUNCE_INTERVAL, + .gpio = ENS202_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static void __init ens202_setup(void) +{ + const char *nvram = (char *) KSEG1ADDR(0x1f040000); + u8 mac_buff[6]; + u8 *mac = NULL; + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + if (ath79_nvram_parse_mac_addr(nvram, 0x10000, + "ethaddr=", mac_buff) == 0) { + ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1); + mac = mac_buff; + } + + ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE); + + ath79_gpio_output_select(ENS202_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(ENS202_GPIO_LED_WLAN1, AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(ENS202_GPIO_LED_WLAN2, AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(ENS202_GPIO_LED_WLAN3, AR934X_GPIO_OUT_GPIO); + ath79_gpio_output_select(ENS202_GPIO_LED_WLAN4, AR934X_GPIO_OUT_GPIO); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ens202_leds_gpio), + ens202_leds_gpio); + ath79_register_gpio_keys_polled(-1, ENS202_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ens202_gpio_keys), + ens202_gpio_keys); + + ath79_register_m25p80(NULL); + + ath79_register_wmac(art + 0x1000, NULL); + + ath79_register_mdio(1, 0); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | + AR934X_ETH_CFG_SW_ONLY_MODE); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(0); + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_ENS202EXT, "ENS202EXT", "EnGenius ENS202EXT", + ens202_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index ddb91ad46d..0d05086a1c 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -95,6 +95,7 @@ enum ath79_mach_type { ATH79_MACH_EBR_2310_C1, /* D-link EBR-2310 rev. C1 */ ATH79_MACH_EL_M150, /* EasyLink EL-M150 */ ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */ + ATH79_MACH_ENS202EXT, /* EnGenius ENS202EXT */ ATH79_MACH_EPG5000, /* EnGenius EPG5000 */ ATH79_MACH_ESR1750, /* EnGenius ESR1750 */ ATH79_MACH_ESR900, /* EnGenius ESR900 */ diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 8eac5fc997..32951e5347 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -17,6 +17,7 @@ include ./tp-link.mk include ./ubnt.mk include ./generic.mk include ./legacy-devices.mk +include ./senao.mk endif ifeq ($(SUBTARGET),nand) include ./nand.mk diff --git a/target/linux/ar71xx/image/senao.mk b/target/linux/ar71xx/image/senao.mk new file mode 100644 index 0000000000..50d3ccdfe1 --- /dev/null +++ b/target/linux/ar71xx/image/senao.mk @@ -0,0 +1,26 @@ +define Build/senao-factory-image + $(eval board=$(word 1,$(1))) + $(eval rootfs=$(word 2,$(1))) + + mkdir -p $@.senao + + touch $@.senao/FWINFO-OpenWrt-$(REVISION)-$(board) + $(CP) $(IMAGE_KERNEL) $@.senao/openwrt-senao-$(board)-uImage-lzma.bin + $(CP) $(rootfs) $@.senao/openwrt-senao-$(board)-root.squashfs + + $(TAR) -czf $@ -C $@.senao . + rm -rf $@.senao +endef + +define Device/ens202ext + DEVICE_TITLE := EnGenius ENS202EXT + BOARDNAME := ENS202EXT + DEVICE_PACKAGES += rssileds + KERNEL_SIZE := 1536k + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | check-size $$(KERNEL_SIZE) + IMAGE_SIZE := 12096k + IMAGES += factory.bin + IMAGE/factory.bin/squashfs := append-rootfs | pad-rootfs | senao-factory-image ens202ext $$$$@ + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,13632k(firmware),2048k(failsafe)ro,64k(art)ro +endef +TARGET_DEVICES += ens202ext