From: Hans de Goede Date: Fri, 23 Nov 2018 09:11:48 +0000 (+0100) Subject: brcmfmac: Call brcmf_dmi_probe before brcmf_of_probe X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=554da3868eb1d7174710c18b4ddd6ff01f6d612c;p=openwrt%2Fstaging%2Fblogic.git brcmfmac: Call brcmf_dmi_probe before brcmf_of_probe ARM systems with UEFI may have both devicetree (of) and DMI data in this case we end up setting brcmf_mp_device.board_type twice. In this case we should prefer the devicetree data, because: 1) The devicerree data is more reliable 2) Some ARM systems (e.g. the Raspberry Pi 3 models) support both UEFI and classic uboot booting, the devicetree data is always there, so using it makes sure we ask for the same nvram file independent of how we booted. This commit moves the brcmf_dmi_probe call to before the brcmf_of_probe call, so that the latter can override the value of the first if both are set. Fixes: bd1e82bb420a ("brcmfmac: Set board_type from DMI on x86 based ...") Cc: Peter Robinson Tested-and-reported-by: Peter Robinson Signed-off-by: Hans de Goede Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c index e738112ed87c..1f1e95a15a17 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c @@ -449,8 +449,8 @@ struct brcmf_mp_device *brcmf_get_module_param(struct device *dev, } if (!found) { /* No platform data for this device, try OF and DMI data */ - brcmf_of_probe(dev, bus_type, settings); brcmf_dmi_probe(settings, chip, chiprev); + brcmf_of_probe(dev, bus_type, settings); } return settings; }