From: Andrew Cameron Date: Sun, 6 Nov 2022 14:43:37 +0000 (+0000) Subject: ath79: add support for TP-Link CPE605-v1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=550e5b218453172de16309e3e1d1a8c451c8b3c3;p=openwrt%2Fstaging%2Fnbd.git ath79: add support for TP-Link CPE605-v1 TP-Link CPE605-v1 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 23dBi high-gain directional antenna and a dedicated metal reflector - Power, LAN, WLAN5G green LEDs - 3x green RSSI LEDs Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron --- diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe605-v1.dts b/target/linux/ath79/dts/ar9344_tplink_cpe605-v1.dts new file mode 100644 index 0000000000..0c6eee7ba6 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tplink_cpe605-v1.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9344_tplink_cpe.dtsi" + +/ { + model = "TP-Link CPE605 v1"; + compatible = "tplink,cpe605-v1", "qca,ar9344"; + + aliases { + led-boot = &led_lan; + led-failsafe = &led_lan; + led-upgrade = &led_lan; + }; + + leds { + compatible = "gpio-leds"; + + led_lan: lan { + label = "green:lan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "green:wlan5g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +ð1 { + compatible = "syscon", "simple-mfd"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index cfcd2dfeda..f0610f39e9 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -18,6 +18,7 @@ glinet,6416|\ glinet,gl-ar300m-lite|\ glinet,gl-ar300m16|\ pcs,cap324|\ +tplink,cpe605-v1|\ tplink,cpe610-v1|\ tplink,cpe610-v2|\ tplink,tl-wa1201-v2) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index e14240ba0b..529d33782f 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -77,6 +77,7 @@ ath79_setup_interfaces() tplink,cpe210-v3|\ tplink,cpe510-v2|\ tplink,cpe510-v3|\ + tplink,cpe605-v1|\ tplink,cpe610-v1|\ tplink,cpe610-v2|\ tplink,cpe710-v1|\ diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 598085e50b..314ece1e03 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -350,6 +350,16 @@ define Device/tplink_cpe510-v3 endef TARGET_DEVICES += tplink_cpe510-v3 +define Device/tplink_cpe605-v1 + $(Device/tplink-safeloader-okli) + SOC := ar9344 + IMAGE_SIZE := 7680k + DEVICE_MODEL := CPE605 + DEVICE_VARIANT := v1 + TPLINK_BOARD_ID := CPE605V1 +endef +TARGET_DEVICES += tplink_cpe605-v1 + define Device/tplink_cpe610-v1 $(Device/tplink-safeloader-okli) SOC := ar9344