From: Hauke Mehrtens Date: Tue, 26 Sep 2017 20:41:56 +0000 (+0200) Subject: sunxi: add Orange Pi R1 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5508510e744ce9dfaba23cb8639977f021bd29f9;p=openwrt%2Fstaging%2Fluka.git sunxi: add Orange Pi R1 support The following features are working and tested: * both Ethernet ports * MMC * LED The following features are not working: * Wifi (There is a crappy driver we could port) * SPI flash (I haven't looked into this) I haven't tried out the rest. Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile index 8b073497a5..13fb8cb188 100644 --- a/package/boot/uboot-sunxi/Makefile +++ b/package/boot/uboot-sunxi/Makefile @@ -126,6 +126,12 @@ define U-Boot/Lamobo_R1 BUILD_DEVICES:=sun7i-a20-lamobo-r1 endef +define U-Boot/orangepi_r1 + BUILD_SUBTARGET:=cortexa7 + NAME:=Orange Pi R1 (H2+) + BUILD_DEVICES:=sun8i-h2-plus-orangepi-r1 +endef + define U-Boot/orangepi_plus BUILD_SUBTARGET:=cortexa7 NAME:=Orange Pi Plus (H3) @@ -164,6 +170,7 @@ UBOOT_TARGETS := \ Linksprite_pcDuino \ Linksprite_pcDuino3 \ Lamobo_R1 \ + orangepi_r1 \ orangepi_plus \ pangolin \ pine64_plus diff --git a/package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch b/package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch new file mode 100644 index 0000000000..65ae63c64d --- /dev/null +++ b/package/boot/uboot-sunxi/patches/300-sunxi-add-device-tree-for-Orange-Pi-R1-board.patch @@ -0,0 +1,182 @@ +From 1f92596cc520f760589289059a5aa739366dd19c Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Tue, 26 Sep 2017 22:16:59 +0200 +Subject: sunxi: add device tree for Orange Pi R1 board + +Signed-off-by: Hauke Mehrtens +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 157 +++++++++++++++++++++++++++++ + 2 files changed, 158 insertions(+) + create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts + +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -310,6 +310,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ + sun8i-a83t-cubietruck-plus.dtb \ + sun8i-a83t-sinovoip-bpi-m3.dtb + dtb-$(CONFIG_MACH_SUN8I_H3) += \ ++ sun8i-h2-plus-orangepi-r1.dtb \ + sun8i-h2-plus-orangepi-zero.dtb \ + sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-orangepi-2.dtb \ +--- /dev/null ++++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts +@@ -0,0 +1,157 @@ ++/* ++ * Copyright (C) 2017 Hauke Mehrtens ++ * ++ * Based on sun8i-h2-plus-orangepi-zero.dts, which is: ++ * Copyright (C) 2016 Icenowy Zheng ++ * ++ * Based on sun8i-h3-orangepi-one.dts, which is: ++ * Copyright (C) 2016 Hans de Goede ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "sun8i-h3.dtsi" ++#include "sunxi-common-regulators.dtsi" ++ ++#include ++#include ++#include ++ ++/ { ++ model = "Xunlong Orange Pi R1"; ++ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; ++ ++ aliases { ++ serial0 = &uart0; ++ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ ++ ethernet1 = &xr819; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ pwr_led { ++ label = "orangepi:green:pwr"; ++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; ++ }; ++ ++ status_led { ++ label = "orangepi:red:status"; ++ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ reg_vcc_wifi: reg_vcc_wifi { ++ compatible = "regulator-fixed"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-wifi"; ++ enable-active-high; ++ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; ++ }; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&emac { ++ phy = <&phy1>; ++ phy-mode = "mii"; ++ allwinner,use-internal-phy; ++ allwinner,leds-active-low; ++ status = "okay"; ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ ++ cd-inverted; ++ status = "okay"; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins_a>; ++ vmmc-supply = <®_vcc_wifi>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ /* ++ * Explicitly define the sdio device, so that we can add an ethernet ++ * alias for it (which e.g. makes u-boot set a mac-address). ++ */ ++ xr819: sdio_wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&usbphy { ++ /* USB VBUS is always on */ ++ status = "okay"; ++}; diff --git a/package/boot/uboot-sunxi/patches/301-sunxi-add-orangepi-R1-defconfig.patch b/package/boot/uboot-sunxi/patches/301-sunxi-add-orangepi-R1-defconfig.patch new file mode 100644 index 0000000000..6240fe3f57 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/301-sunxi-add-orangepi-R1-defconfig.patch @@ -0,0 +1,48 @@ +From 231201c71b902b5999ed9b143f2a54674cfae88a Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Tue, 26 Sep 2017 22:17:33 +0200 +Subject: sunxi: add orangepi R1 defconfig + +Signed-off-by: Hauke Mehrtens +--- + board/sunxi/MAINTAINERS | 5 +++++ + configs/orangepi_r1_defconfig | 19 +++++++++++++++++++ + 2 files changed, 24 insertions(+) + create mode 100644 configs/orangepi_r1_defconfig + +--- a/board/sunxi/MAINTAINERS ++++ b/board/sunxi/MAINTAINERS +@@ -302,6 +302,11 @@ M: Jagan Teki ++S: Maintained ++F: configs/orangepi_r1_defconfig ++ + PINE64 BOARDS + M: Andre Przywara + S: Maintained +--- /dev/null ++++ b/configs/orangepi_r1_defconfig +@@ -0,0 +1,19 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_SPL_SPI_FLASH_SUPPORT=y ++CONFIG_MACH_SUN8I_H3=y ++CONFIG_DRAM_CLK=624 ++CONFIG_DRAM_ZQ=3881979 ++CONFIG_DRAM_ODT_EN=y ++# CONFIG_VIDEO_DE2 is not set ++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1" ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++CONFIG_CONSOLE_MUX=y ++CONFIG_SPL=y ++# CONFIG_CMD_IMLS is not set ++# CONFIG_CMD_FLASH is not set ++# CONFIG_CMD_FPGA is not set ++CONFIG_SPL_SPI_SUNXI=y ++CONFIG_SUN8I_EMAC=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/target/linux/sunxi/image/cortex-a7.mk b/target/linux/sunxi/image/cortex-a7.mk index ecf376fbe4..29c30ef494 100644 --- a/target/linux/sunxi/image/cortex-a7.mk +++ b/target/linux/sunxi/image/cortex-a7.mk @@ -108,6 +108,16 @@ endef TARGET_DEVICES += sun6i-a31-m9 +define Device/sun8i-h2-plus-orangepi-r1 + DEVICE_TITLE:=Xunlong Orange Pi R1 + DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-usb-net kmod-usb-net-rtl8152 + SUPPORTED_DEVICES:=xunlong,orangepi-r1 + SUNXI_DTS:=sun8i-h2-plus-orangepi-r1 +endef + +TARGET_DEVICES += sun8i-h2-plus-orangepi-r1 + + define Device/sun8i-h3-orangepi-plus DEVICE_TITLE:=Xunlong Orange Pi Plus DEVICE_PACKAGES:=kmod-rtc-sunxi diff --git a/target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch b/target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch new file mode 100644 index 0000000000..7e92a565fa --- /dev/null +++ b/target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch @@ -0,0 +1,196 @@ +From daf75255fb67bf44db178e4c95a803b7972ed670 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Tue, 26 Sep 2017 22:29:06 +0200 +Subject: ARM: dts: sunxi: add support for Orange Pi R1 board + +Signed-off-by: Hauke Mehrtens +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 171 ++++++++++++++++++++++++ + 2 files changed, 172 insertions(+) + create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -819,6 +819,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-a33-sinlinx-sina33.dtb \ + sun8i-a83t-allwinner-h8homlet-v2.dtb \ + sun8i-a83t-cubietruck-plus.dtb \ ++ sun8i-h2-plus-orangepi-r1.dtb \ + sun8i-h3-bananapi-m2-plus.dtb \ + sun8i-h3-nanopi-neo.dtb \ + sun8i-h3-orangepi-2.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts +@@ -0,0 +1,171 @@ ++/* ++ * Copyright (C) 2017 Hauke Mehrtens ++ * ++ * Based on sun8i-h2-plus-orangepi-zero.dts, which is: ++ * Copyright (C) 2016 Icenowy Zheng ++ * ++ * Based on sun8i-h3-orangepi-one.dts, which is: ++ * Copyright (C) 2016 Hans de Goede ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This file is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++#include "sun8i-h3.dtsi" ++#include "sunxi-common-regulators.dtsi" ++ ++#include ++#include ++#include ++ ++/ { ++ model = "Xunlong Orange Pi R1"; ++ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; ++ ++ aliases { ++ serial0 = &uart0; ++ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ ++ ethernet0 = &emac; ++ ethernet1 = &xr819; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ pwr_led { ++ label = "orangepi:green:pwr"; ++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; ++ default-state = "on"; ++ }; ++ ++ status_led { ++ label = "orangepi:red:status"; ++ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ reg_vcc_wifi: reg_vcc_wifi { ++ compatible = "regulator-fixed"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-name = "vcc-wifi"; ++ enable-active-high; ++ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; ++ post-power-on-delay-ms = <200>; ++ }; ++}; ++ ++&ehci1 { ++ status = "okay"; ++}; ++ ++&emac { ++ phy-handle = <&int_mii_phy>; ++ phy-mode = "mii"; ++ allwinner,leds-active-low; ++ status = "okay"; ++}; ++ ++&mmc0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ ++ cd-inverted; ++ status = "okay"; ++}; ++ ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins_a>; ++ vmmc-supply = <®_vcc_wifi>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ /* ++ * Explicitly define the sdio device, so that we can add an ethernet ++ * alias for it (which e.g. makes u-boot set a mac-address). ++ */ ++ xr819: sdio_wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++&mmc1_pins_a { ++ bias-pull-up; ++}; ++ ++&ohci1 { ++ status = "okay"; ++}; ++ ++&uart0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "disabled"; ++}; ++ ++&uart2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart2_pins>; ++ status = "disabled"; ++}; ++ ++&usbphy { ++ /* USB VBUS is always on */ ++ status = "okay"; ++};