From: Robert Marko <robert.marko@sartura.hr>
Date: Tue, 14 Dec 2021 00:00:00 +0000 (+0100)
Subject: ipq40xx: convert some boards to DSA
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=550253bdf99280b3017baf56dec36406fa395734;p=openwrt%2Fstaging%2Fnbd.git

ipq40xx: convert some boards to DSA

Convert IPQ40xx boards to DSA setup.

Signed-off-by: Leon M. George <leon@georgemail.eu>
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Signed-off-by: ChunAm See <z1250747241@gmail.com>
Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
---

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
index 4b9522af92..74f31e778f 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -10,7 +10,7 @@ board=$(board_name)
 
 case "$board" in
 alfa-network,ap120c-ac)
-	ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
+	ucidef_set_led_netdev "wan" "WAN" "amber:wan" "wan"
 	;;
 asus,rt-ac42u)
 	ucidef_set_led_switch "lan1" "LAN1" "blue:lan-1" "switch0" "0x02"
@@ -24,7 +24,7 @@ asus,rt-ac58u)
 	;;
 avm,fritzbox-4040)
 	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
-	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
 	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
 	;;
 avm,fritzbox-7530 |\
@@ -58,17 +58,17 @@ glinet,gl-ap1300)
 mikrotik,cap-ac)
 	ucidef_set_led_default "power" "POWER" "blue:power" "1"
 	ucidef_set_led_default "user" "USER" "green:user" "0"
-	ucidef_set_led_switch "eth1" "ETH1" "green:eth1" "switch0" "0x20"
-	ucidef_set_led_switch "eth2" "ETH2" "green:eth2" "switch0" "0x10"
+	ucidef_set_led_netdev "eth1" "ETH1" "green:eth1" "wan"
+	ucidef_set_led_netdev "eth2" "ETH2" "green:eth2" "lan"
 	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
 	;;
 mikrotik,hap-ac3)
-	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x10"
-	ucidef_set_led_switch "lan2" "LAN2" "green:lan2" "switch0" "0x08"
-	ucidef_set_led_switch "lan3" "LAN3" "green:lan3" "switch0" "0x04"
-	ucidef_set_led_switch "lan4" "LAN4" "green:lan4" "switch0" "0x02"
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth0"
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
+	ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
+	ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
 	ucidef_set_led_gpio "poe" "POE" "red:poe" "452" "0"
 	;;
 mikrotik,sxtsq-5-ac)
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index d13d21334c..f57e3fd5d2 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -12,28 +12,58 @@ ipq40xx_setup_interfaces()
 
 	case "$board" in
 	8dev,habanero-dvk|\
+	avm,fritzbox-4040|\
+	asus,rt-ac58u|\
+	linksys,ea6350v3|\
+	linksys,ea8300|\
+	linksys,mr8300|\
+	mikrotik,hap-ac2|\
+	mikrotik,hap-ac3|\
+	p2w,r619ac-64m|\
+	p2w,r619ac-128m|\
+	zyxel,nbg6617)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
 	8dev,jalapeno|\
 	alfa-network,ap120c-ac|\
+	asus,map-ac2200|\
+	cilab,meshpoint-one|\
+	edgecore,ecw5211|\
+	glinet,gl-b2200|\
+	mikrotik,cap-ac|\
+	netgear,wac510)
+		ucidef_set_interfaces_lan_wan "lan" "wan"
+		;;
+	aruba,ap-303|\
+	avm,fritzrepeater-1200|\
+	meraki,mr33|\
+	meraki,mr74|\
+	mikrotik,lhgg-60ad|\
+	mikrotik,sxtsq-5-ac)
+		ucidef_set_interface_lan "lan"
+		;;
+	avm,fritzbox-7530)
+		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+		;;
+	cellc,rtl30vw)
+		ucidef_set_interface_lan "lan1 lan2"
+		;;
+	glinet,gl-b1300)
+		ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
+		;;
 	engenius,emr3500|\
 	engenius,ens620ext|\
 	luma,wrtq-329acn|\
-	netgear,wac510|\
 	plasmacloud,pa1200|\
 	plasmacloud,pa2200|\
 	sony,ncp-hg100-cellular)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
-	aruba,ap-303|\
 	aruba,ap-365|\
-	avm,fritzrepeater-1200|\
 	dlink,dap-2610 |\
 	engenius,eap1300|\
 	engenius,emd1|\
 	extreme-networks,ws-ap3915i|\
-	meraki,mr33|\
-	meraki,mr74|\
-	mikrotik,lhgg-60ad|\
-	mikrotik,sxtsq-5-ac|\
 	netgear,ex6100v2|\
 	netgear,ex6150v2|\
 	zyxel,wre6606)
@@ -45,8 +75,6 @@ ipq40xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
 		;;
-	asus,map-ac2200|\
-	cilab,meshpoint-one|\
 	edgecore,ecw5211|\
 	edgecore,oap100|\
 	google,wifi|\
@@ -54,34 +82,8 @@ ipq40xx_setup_interfaces()
 	openmesh,a62)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
-	mikrotik,cap-ac)
-		ucidef_add_switch "switch0" \
-			"0t@eth0" "4:lan" "5:wan"
-		;;
-	asus,rt-ac42u|\
-	asus,rt-ac58u|\
-	mikrotik,hap-ac2|\
-	mikrotik,hap-ac3|\
-	p2w,r619ac-64m|\
-	p2w,r619ac-128m|\
-	zyxel,nbg6617)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	avm,fritzbox-4040|\
-	linksys,ea6350v3|\
-	linksys,ea8300)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	linksys,mr8300)
+	asus,rt-ac42u)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
-		;;
-	avm,fritzbox-7530)
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
@@ -101,10 +103,8 @@ ipq40xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
-	cellc,rtl30vw)
-		ucidef_set_interface_lan "eth0"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "3:lan" "4:lan"
+	compex,wpj428)
+		ucidef_set_interface_lan "lan1 lan2"
 		;;
 	devolo,magic-2-wifi-next)
 		ucidef_set_interface_lan "eth0 eth1 eth2"
@@ -115,17 +115,11 @@ ipq40xx_setup_interfaces()
 			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
 		;;
 	glinet,gl-ap1300 |\
-	glinet,gl-b1300 |\
 	glinet,gl-s1300)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "3:lan" "4:lan"
 		;;
-	glinet,gl-b2200)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "5:lan" "0u@eth1" "4:wan"
-		;;
 	mobipromo,cm520-79f)
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "3:lan:2" "4:lan:1"
@@ -157,9 +151,7 @@ ipq40xx_setup_interfaces()
 			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
 		;;
 	zte,mf286d)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "0u@eth1" "5:wan"
+		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
 		;;
 	zte,mf289f)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -216,7 +208,9 @@ ipq40xx_setup_macs()
 	ezviz,cs-w3-wd1200g-eup)
 		label_mac=$(mtd_get_mac_binary "ART" 0x6)
 		;;
-	linksys,ea6350v3)
+	linksys,ea6350v3|\
+	linksys,ea8300  |\
+	linksys,mr8300)
 		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/05_compat-version b/target/linux/ipq40xx/base-files/etc/board.d/05_compat-version
new file mode 100644
index 0000000000..70272f99ed
--- /dev/null
+++ b/target/linux/ipq40xx/base-files/etc/board.d/05_compat-version
@@ -0,0 +1,18 @@
+#
+# Copyright (C) 2022 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+	*)
+		ucidef_set_compat_version "1.1"
+		;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
index 940af0528d..3c247ae6aa 100644
--- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
+++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
@@ -21,8 +21,8 @@ preinit_set_mac_address() {
 	linksys,ea8300|\
 	linksys,mr8300)
 		base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		ip link set dev eth0 address "$base_mac"
-		ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
+		ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
+		ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
 		;;
 	meraki,mr33|\
 	meraki,mr74)
diff --git a/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh
deleted file mode 100644
index a8a4469e6c..0000000000
--- a/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-set_preinit_iface() {
-	. /lib/functions.sh
-
-	case $(board_name) in
-	aruba,ap-303| \
-	asus,rt-ac42u| \
-	asus,rt-ac58u| \
-	avm,fritzbox-4040| \
-	ezviz,cs-w3-wd1200g-eup| \
-	glinet,gl-b1300| \
-	linksys,ea8300| \
-	linksys,mr8300| \
-	meraki,mr33| \
-	meraki,mr74| \
-	zyxel,nbg6617)
-		ifname=eth0
-		;;
-	devolo,magic-2-wifi-next)
-		ifname=eth1
-		;;
-	esac
-}
-
-boot_hook_add preinit_main set_preinit_iface
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index def355b465..def0401ac5 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -14,6 +14,7 @@
 		led-failsafe = &status;
 		led-running = &status;
 		led-upgrade = &status;
+		ethernet1 = &swport5;
 	};
 
 	keys {
@@ -320,6 +321,24 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
index 515d71b456..0609324310 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cap-ac.dts
@@ -222,6 +222,24 @@
 	#gpio-cells = <2>;
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
index 0fd9654111..75b556a7f9 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts
@@ -102,6 +102,34 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport1 {
+	status = "okay";
+};
+
+&swport2 {
+	status = "okay";
+};
+
+&swport3 {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
index df2ef37f17..3060b7bd1c 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts
@@ -14,6 +14,8 @@
 		led-failsafe = &led_power;
 		led-running = &led_power;
 		led-upgrade = &led_power;
+		ethernet0 = &swport5;
+		ethernet1 = &gmac;
 	};
 
 	chosen {
@@ -287,6 +289,24 @@
 	pinctrl-names = "default";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
index d962ca58fa..e448206c36 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts
@@ -273,6 +273,34 @@
 	#gpio-cells = <2>;
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport1 {
+	status = "okay";
+};
+
+&swport2 {
+	status = "okay";
+};
+
+&swport3 {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &usb3_ss_phy {
 	status = "okay";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
index ee174a29d1..c8868d8b30 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-hap-ac2.dts
@@ -251,6 +251,38 @@
 	qcom,single-led-10;
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport1 {
+	status = "okay";
+	label = "lan4";
+};
+
+&swport2 {
+	status = "okay";
+	label = "lan3";
+};
+
+&swport3 {
+	status = "okay";
+	label = "lan2";
+};
+
+&swport4 {
+	status = "okay";
+	label = "lan1";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
index ee94a15c00..4d09e86dd6 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi
@@ -7,6 +7,10 @@
 #include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
+	aliases {
+		ethernet1 = &swport5;
+	};
+
 	soc {
 		rng@22000 {
 			status = "okay";
@@ -227,6 +231,24 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
index 4922938692..ff7252d696 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
@@ -302,6 +302,42 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport1 {
+	status = "okay";
+
+	label = "lan4";
+};
+
+&swport2 {
+	status = "okay";
+
+	label = "lan3";
+};
+
+&swport3 {
+	status = "okay";
+
+	label = "lan2";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan1";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "ZyXEL-NBG6617";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
index 1d860627b5..87705e5f60 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -277,6 +277,34 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport1 {
+	status = "okay";
+};
+
+&swport2 {
+	status = "okay";
+};
+
+&swport3 {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "RT-AC58U";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
index 415bec5a8f..07fa80742e 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-sxtsq-5-ac.dts
@@ -220,3 +220,20 @@
 &mdio {
 	status = "okay";
 };
+
+&gmac {
+       status = "okay";
+};
+
+&switch {
+       status = "okay";
+
+       /delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+       status = "okay";
+
+       label = "lan";
+       phy-mode = "rgmii";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
index aa54f43e85..2dbfaa086e 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wac510.dts
@@ -16,6 +16,7 @@
 		led-failsafe = &led_power_amber;
 		led-running = &led_power_green;
 		led-upgrade = &led_power_amber;
+		ethernet1 = &swport5;
 	};
 
 	chosen {
@@ -336,6 +337,24 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &mdio {
 	status = "okay";
 
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
index af79020121..a0ceb299b4 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts
@@ -262,6 +262,30 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport1 {
+	status = "okay";
+};
+
+&swport2 {
+	status = "okay";
+};
+
+&swport3 {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
index 20b981a372..723f2161c6 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts
@@ -26,6 +26,10 @@
 			status = "okay";
 			pinctrl-0 = <&mdio_pins>;
 			pinctrl-names = "default";
+
+			ethphy: ethernet-phy@0 {
+				reg = <0x0>;
+			};
 		};
 
 		tcsr@1949000 {
@@ -237,8 +241,32 @@
 	status = "okay";
 };
 
-&ethphy0 {
-	status = "disabled";
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
+};
+
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+
+	/delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+	status = "okay";
+
+	label = "lan";
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii-id";
 };
 
 &ethphy1 {
@@ -260,13 +288,3 @@
 &psgmiiphy {
 	status = "disabled";
 };
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
-};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
index 6fdc361ee7..e17609ff6f 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-gl-b2200.dts
@@ -18,6 +18,10 @@
 		bootargs-append = " root=/dev/mmcblk0p2 rw rootwait clk_ignore_unused";
 	};
 
+	aliases {
+		ethernet1 = &swport4;
+	};
+
 	soc {
 		rng@22000 {
 			status = "okay";
@@ -346,6 +350,26 @@
 	};
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "wan";
+};
+
+&swport5 {
+	status = "okay";
+
+	label = "lan";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
index c467d85049..23a654dcff 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts
@@ -15,6 +15,7 @@
 		led-failsafe = &led_status;
 		led-running = &led_status;
 		led-upgrade = &led_upgrade;
+		ethernet1 = &swport5;
 	};
 
 	soc {
@@ -331,6 +332,34 @@
 	};
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport1 {
+	status = "okay";
+};
+
+&swport2 {
+	status = "okay";
+};
+
+&swport3 {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts
index c03762eac1..35c4c26a2c 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts
@@ -306,6 +306,38 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport1 {
+	status = "okay";
+	label = "lan4";
+};
+
+&swport2 {
+	status = "okay";
+	label = "lan3";
+};
+
+&swport3 {
+	status = "okay";
+	label = "lan2";
+};
+
+&swport4 {
+	status = "okay";
+	label = "lan1";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
index c208bf33ee..38bacfa2ba 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-lhgg-60ad.dts
@@ -261,3 +261,21 @@
 &psgmiiphy {
 	status = "disabled";
 };
+
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+
+	/delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+	status = "okay";
+
+	label = "lan";
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
index 94e94beb81..32f0473fb1 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts
@@ -15,6 +15,7 @@
 		led-failsafe = &led_red0;
 		led-running = &led_blue0;
 		led-upgrade = &led_red0;
+		ethernet1 = &swport4;
 	};
 
 	soc {
@@ -340,3 +341,23 @@
 	pinctrl-names = "default";
 	status = "okay";
 };
+
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "wan";
+};
+
+&swport5 {
+	status = "okay";
+
+	label = "lan";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
index d2a010055c..a832e2392a 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-mf286d.dts
@@ -217,6 +217,12 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&macaddr_config_0>;
+};
+
 &nand {
 	pinctrl-0 = <&nand_pins>;
 	pinctrl-names = "default";
@@ -319,6 +325,36 @@
 	status = "okay";
 };
 
+&switch {
+	status = "okay";
+};
+
+&swport2 {
+	status = "okay";
+
+	label = "lan4";
+};
+
+&swport3 {
+	status = "okay";
+
+	label = "lan3";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan2";
+};
+
+&swport5 {
+	status = "okay";
+
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&macaddr_config_0>;
+	mac-address-increment = <1>;
+};
+
 &tlmm {
 	i2c_0_pins: i2c_0_pinmux {
 		mux {
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
index f66c9c86ea..d7a987f98d 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
@@ -320,6 +320,42 @@
 	qcom,single-led-10;
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport1 {
+	status = "okay";
+
+	label = "lan4";
+};
+
+&swport2 {
+	status = "okay";
+
+	label = "lan3";
+};
+
+&swport3 {
+	status = "okay";
+
+	label = "lan2";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan1";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &usb3_ss_phy {
 	status = "okay";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
index 8db7226ce1..3205b7d564 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts
@@ -371,3 +371,23 @@
 	status = "okay";
 	qcom,ath10k-calibration-variant = "cellc,rtl30vw";
 };
+
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport3 {
+	status = "okay";
+
+	label = "lan2";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan1";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
index 8c9d1c7f03..4f2cf1f516 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-xx8300.dtsi
@@ -3,7 +3,7 @@
 /*
  * Device Tree Source for Linksys xx8300 (Dallas)
  *
- * Copyright (C) 2019 Jeff Kletsky
+ * Copyright (C) 2019, 2022 Jeff Kletsky
  * Updated 2020 Hans Geiblinger
  *
  */
@@ -286,3 +286,31 @@
 &usb3_ss_phy {
 	status = "okay";
 };
+
+&gmac {
+      status = "okay";
+};
+
+&switch {
+      status = "okay";
+};
+
+&swport1 {
+      status = "okay";
+};
+
+&swport2 {
+      status = "okay";
+};
+
+&swport3 {
+      status = "okay";
+};
+
+&swport4 {
+      status = "okay";
+};
+
+&swport5 {
+      status = "okay";
+};
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
index b6ce8c027f..48b5cd53d8 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
@@ -227,6 +227,14 @@
 				precal_art_5000: precal@5000 {
 					reg = <0x5000 0x2f20>;
 				};
+
+				macaddr_art_e010: mac-address@e010 {
+					reg = <0xe010 0x6>;
+				};
+
+				macaddr_art_e018: mac-address@e018 {
+					reg = <0xe018 0x6>;
+				};
 			};
 			partition6@180000 {
 				compatible = "denx,fit";
@@ -247,6 +255,30 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport4 {
+	status = "okay";
+	label = "lan1";
+
+	nvmem-cells = <&macaddr_art_e018>;
+	nvmem-cell-names = "mac-address";
+};
+
+&swport5 {
+	status = "okay";
+	label = "lan2";
+
+	nvmem-cells = <&macaddr_art_e010>;
+	nvmem-cell-names = "mac-address";
+};
+
 &usb3_ss_phy {
 	status = "okay";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
index 0925561ed0..41de6bb218 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi
@@ -21,7 +21,7 @@
 			pinctrl-0 = <&mdio_pins>;
 			pinctrl-names = "default";
 
-			ethernet-phy@5 {
+			ethphy: ethernet-phy@5 {
 				reg = <0x5>;
 			};
 		};
@@ -214,6 +214,24 @@
 	};
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+
+	/delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+	status = "okay";
+
+	label = "lan";
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii-id";
+};
+
 &ethphy0 {
 	status = "disabled";
 };
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
index e8a14c9dee..9e46555480 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
@@ -266,6 +266,30 @@
 	status = "okay";
 };
 
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&swport3 {
+	status = "okay";
+
+	label = "lan2";
+};
+
+&swport4 {
+	status = "okay";
+
+	label = "lan1";
+};
+
+&swport5 {
+	status = "okay";
+};
+
 &wifi0 {
 	status = "okay";
 	nvmem-cell-names = "pre-calibration";
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi
index fa755b3873..bc385d330e 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-insect-common.dtsi
@@ -386,3 +386,41 @@
 	status = "okay";
 	qcom,ath10k-calibration-variant = "Meraki-MR33";
 };
+
+&gmac {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+
+	/delete-property/ psgmii-ethphy;
+};
+
+&swport5 {
+	status = "okay";
+
+	label = "lan";
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-rxid";
+};
+
+&ethphy0 {
+	status = "disabled";
+};
+
+&ethphy2 {
+	status = "disabled";
+};
+
+&ethphy3 {
+	status = "disabled";
+};
+
+&ethphy4 {
+	status = "disabled";
+};
+
+&psgmiiphy {
+	status = "disabled";
+};
diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile
index 5851b29875..2ba4c779a0 100644
--- a/target/linux/ipq40xx/image/Makefile
+++ b/target/linux/ipq40xx/image/Makefile
@@ -10,6 +10,8 @@ define Device/Default
 	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
 	IMAGE/sysupgrade.bin/squashfs :=
+	DEVICE_COMPAT_VERSION := 1.1
+	DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
 endef
 
 include $(SUBTARGET).mk