From: Gabor Juhos Date: Wed, 29 Aug 2012 10:37:47 +0000 (+0000) Subject: ramips: make built-in switch transparent for ALL0256N and ALL5002 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=54d8a55eed9be4b08ccb16a0f9e9d7c578f7aa85;p=openwrt%2Fstaging%2Fblocktrron.git ramips: make built-in switch transparent for ALL0256N and ALL5002 This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle SVN-Revision: 33305 --- diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network index d20b60af06..76c690198e 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/network +++ b/target/linux/ramips/base-files/etc/uci-defaults/network @@ -42,7 +42,10 @@ ramips_setup_interfaces() case $board in all0256n | \ - all5002 | \ + all5002) + ucidef_set_interface_lan "eth0" + ;; + dir-615-h1 | \ wl-330n) ucidef_set_interface_lan "eth0.1" diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c index d30300e2da..7f5e00b418 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all0256n.c @@ -75,7 +75,7 @@ static void __init all0256n_init(void) rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); rt305x_register_spi(all0256n_spi_slave_info, ARRAY_SIZE(all0256n_spi_slave_info)); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL; + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; rt305x_register_ethernet(); ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio), all0256n_leds_gpio); diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c index e9d1f41da7..151671acbc 100644 --- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c +++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-all5002.c @@ -50,7 +50,7 @@ static void __init all5002_init(void) rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT); rt305x_register_spi(all5002_spi_slave_info, ARRAY_SIZE(all5002_spi_slave_info)); - rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW; + rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE; rt305x_register_ethernet(); rt305x_register_wifi(); rt305x_register_wdt();