From: Mathew McBride Date: Wed, 31 May 2023 05:47:41 +0000 (+0000) Subject: armvirt: add options and driver modules for NXP Layerscape DPAA2 platform X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=54bb95f879aaa62c4253d30390e77bc8180f4ed7;p=openwrt%2Fstaging%2Fhauke.git armvirt: add options and driver modules for NXP Layerscape DPAA2 platform Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride --- diff --git a/target/linux/armvirt/64/config-6.1 b/target/linux/armvirt/64/config-6.1 index f3fa13f06f..6bb43c22ca 100644 --- a/target/linux/armvirt/64/config-6.1 +++ b/target/linux/armvirt/64/config-6.1 @@ -1,9 +1,11 @@ CONFIG_64BIT=y +CONFIG_ARCH_LAYERSCAPE=y CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y CONFIG_ARCH_MMAP_RND_BITS=18 CONFIG_ARCH_MMAP_RND_BITS_MAX=24 CONFIG_ARCH_MMAP_RND_BITS_MIN=18 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_NXP=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ARCH_STACKWALK=y CONFIG_ARCH_VEXPRESS=y @@ -32,21 +34,33 @@ CONFIG_ARM64_PTR_AUTH_KERNEL=y CONFIG_ARM64_SME=y CONFIG_ARM64_SVE=y CONFIG_ARM64_TAGGED_ADDR_ABI=y -CONFIG_ARM64_VA_BITS=39 -CONFIG_ARM64_VA_BITS_39=y +CONFIG_ARM64_VA_BITS=48 +CONFIG_ARM64_VA_BITS_48=y CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y +# CONFIG_ARM_DMC620_PMU is not set CONFIG_ARM_SBSA_WATCHDOG=y +CONFIG_ARM_SMC_WATCHDOG=y +CONFIG_ARM_SMMU=y +# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set +# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set +CONFIG_ARM_SMMU_V3=y +# CONFIG_ARM_SMMU_V3_PMU is not set +# CONFIG_ARM_SMMU_V3_SVA is not set CONFIG_ATOMIC64_SELFTEST=y CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BLK_PM=y CONFIG_CAVIUM_TX2_ERRATUM_219=y CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y +CONFIG_CLK_LS1028A_PLLDIG=y +CONFIG_CLK_QORIQ=y CONFIG_CLK_SP810=y CONFIG_CLK_VEXPRESS_OSC=y +# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set +# CONFIG_COMMON_CLK_FSL_SAI is not set # CONFIG_COMPAT_32BIT_TIME is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_MENU=y @@ -63,6 +77,7 @@ CONFIG_CRYPTO_BLAKE2S=y CONFIG_CRYPTO_CHACHA20=y CONFIG_CRYPTO_CHACHA20_NEON=y CONFIG_CRYPTO_CRYPTD=y +# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set CONFIG_CRYPTO_GHASH_ARM64_CE=y CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y @@ -98,13 +113,21 @@ CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_CMDLINE=y CONFIG_FB_MODE_HELPERS=y CONFIG_FRAME_POINTER=y +CONFIG_FRAME_WARN=2048 +# CONFIG_FSL_DPAA is not set +# CONFIG_FSL_DPAA2_QDMA is not set CONFIG_FSL_ERRATUM_A008585=y +# CONFIG_FSL_FMAN is not set +# CONFIG_FSL_IMX8_DDR_PMU is not set +# CONFIG_FSL_PQ_MDIO is not set CONFIG_FUJITSU_ERRATUM_010001=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_CSUM=y CONFIG_GENERIC_FIND_FIRST_BIT=y +# CONFIG_GIANFAR is not set CONFIG_GPIO_GENERIC=y CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_MPC8XXX=y CONFIG_HDMI=y # CONFIG_HISI_PMU is not set CONFIG_HW_RANDOM=y @@ -113,7 +136,19 @@ CONFIG_HW_RANDOM_VIRTIO=y CONFIG_I2C=y CONFIG_I2C_ALGOBIT=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_IMX=y +# CONFIG_I2C_SLAVE_TESTUNIT is not set CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +# CONFIG_IMX2_WDT is not set +# CONFIG_INPUT_IBM_PANEL is not set +# CONFIG_IOMMU_DEBUGFS is not set +# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set +CONFIG_IOMMU_DEFAULT_DMA_STRICT=y +CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set +# CONFIG_IOMMU_IO_PGTABLE_DART is not set +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +CONFIG_IOMMU_SUPPORT=y CONFIG_KCMP=y CONFIG_LCD_CLASS_DEVICE=m # CONFIG_LCD_PLATFORM is not set @@ -122,6 +157,12 @@ CONFIG_MFD_SYSCON=y CONFIG_MFD_VEXPRESS_SYSREG=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_RICOH_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ACPI=y +CONFIG_MMC_SDHCI_OF_ESDHC=y +CONFIG_MMC_SDHCI_PCI=y +CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_NO_HZ=y @@ -129,6 +170,10 @@ CONFIG_NO_HZ_COMMON=y CONFIG_NO_HZ_IDLE=y CONFIG_NR_CPUS=64 CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y +# CONFIG_NVMEM_LAYERSCAPE_SFP is not set +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_PCI_LAYERSCAPE=y +# CONFIG_PHY_FSL_LYNX_28G is not set CONFIG_PM=y CONFIG_PM_CLK=y CONFIG_PM_GENERIC_DOMAINS=y @@ -136,26 +181,34 @@ CONFIG_PM_GENERIC_DOMAINS_OF=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_VEXPRESS=y CONFIG_POWER_SUPPLY=y +CONFIG_QORIQ_THERMAL=y CONFIG_QUEUED_RWLOCKS=y CONFIG_QUEUED_SPINLOCKS=y CONFIG_REGMAP=y CONFIG_REGMAP_MMIO=y CONFIG_RODATA_FULL_DEFAULT_ENABLED=y +# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set CONFIG_RTC_I2C_AND_SPI=y +CONFIG_SERIAL_8250_FSL=y CONFIG_SMC91X=y CONFIG_SPARSEMEM=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +# CONFIG_SPI_FSL_QUADSPI is not set # CONFIG_SPI_HISI_KUNPENG is not set # CONFIG_SPI_HISI_SFC_V3XX is not set CONFIG_SYNC_FILE=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_THREAD_INFO_IN_TASK=y +# CONFIG_UACCE is not set CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_USB_DWC3=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PLATFORM=y CONFIG_VEXPRESS_CONFIG=y CONFIG_VIDEOMODE_HELPERS=y CONFIG_VIRTIO_DMA_SHARED_BUFFER=y +# CONFIG_VIRTIO_IOMMU is not set CONFIG_VMAP_STACK=y -CONFIG_WATCHDOG_CORE=y CONFIG_ZONE_DMA32=y diff --git a/target/linux/armvirt/config-6.1 b/target/linux/armvirt/config-6.1 index 6cbc963913..6e6b64a313 100644 --- a/target/linux/armvirt/config-6.1 +++ b/target/linux/armvirt/config-6.1 @@ -65,17 +65,17 @@ CONFIG_ARM64_VA_BITS_39=y CONFIG_ARM_AMBA=y CONFIG_ARM_ARCH_TIMER=y CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_DMC620_PMU is not set CONFIG_ARM_GIC=y CONFIG_ARM_GIC_V2M=y CONFIG_ARM_GIC_V3=y CONFIG_ARM_GIC_V3_ITS=y CONFIG_ARM_GIC_V3_ITS_PCI=y CONFIG_ARM_PSCI_FW=y -# CONFIG_ARM_SMMU_V3_PMU is not set CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y CONFIG_BALLOON_COMPACTION=y CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NVME=y +CONFIG_BLK_DEV_SD=y CONFIG_BLK_MQ_PCI=y CONFIG_BLK_MQ_VIRTIO=y CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y @@ -177,6 +177,7 @@ CONFIG_HZ_PERIODIC=y # CONFIG_I2C_AMD_MP2 is not set CONFIG_I2C_HID_ACPI=y # CONFIG_I2C_HISI is not set +# CONFIG_I2C_SLAVE_TESTUNIT is not set CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 # CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set CONFIG_INITRAMFS_SOURCE="" @@ -208,6 +209,8 @@ CONFIG_NET_FLOW_LIMIT=y CONFIG_NLS=y CONFIG_NR_CPUS=256 CONFIG_NVMEM=y +CONFIG_NVME_CORE=y +# CONFIG_NVME_MULTIPATH is not set CONFIG_OF=y CONFIG_OF_ADDRESS=y CONFIG_OF_EARLY_FLATTREE=y @@ -251,11 +254,19 @@ CONFIG_RWSEM_SPIN_ON_OWNER=y CONFIG_SCSI=y CONFIG_SCSI_COMMON=y CONFIG_SCSI_VIRTIO=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y +CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_PNP=y +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SG_POOL=y CONFIG_SMP=y CONFIG_SOCK_RX_QUEUE_MAPPING=y @@ -282,9 +293,14 @@ CONFIG_TIMER_OF=y CONFIG_TIMER_PROBE=y CONFIG_TREE_RCU=y CONFIG_TREE_SRCU=y +# CONFIG_UACCE is not set CONFIG_UCS2_STRING=y CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_USB=y +CONFIG_USB_STORAGE=y CONFIG_USB_SUPPORT=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PCI=y CONFIG_VIRTIO=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_BLK=y @@ -296,5 +312,6 @@ CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_PCI_LEGACY=y CONFIG_VIRTIO_PCI_LIB=y CONFIG_VMAP_STACK=y +CONFIG_WATCHDOG_CORE=y CONFIG_XPS=y CONFIG_ZONE_DMA32=y diff --git a/target/linux/armvirt/image/Makefile b/target/linux/armvirt/image/Makefile index 50c993b522..2de26afb54 100644 --- a/target/linux/armvirt/image/Makefile +++ b/target/linux/armvirt/image/Makefile @@ -106,7 +106,8 @@ define Device/generic GRUB2_VARIANT := generic FILESYSTEMS := ext4 squashfs DEVICE_PACKAGES += kmod-amazon-ena kmod-e1000e kmod-vmxnet3 kmod-rtc-rx8025 \ - kmod-i2c-mux-pca954x kmod-gpio-pca953x partx-utils + kmod-i2c-mux-pca954x kmod-gpio-pca953x partx-utils kmod-wdt-sp805 \ + kmod-fsl-dpaa2-net kmod-sfp endef TARGET_DEVICES += generic diff --git a/target/linux/armvirt/modules.mk b/target/linux/armvirt/modules.mk new file mode 100644 index 0000000000..3ac3f6a27d --- /dev/null +++ b/target/linux/armvirt/modules.mk @@ -0,0 +1,96 @@ +define KernelPackage/acpi-mdio + SUBMENU:=$(NETWORK_DEVICES_MENU) + TITLE:=ACPI MDIO support + DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-mdio-devres + KCONFIG:=CONFIG_ACPI_MDIO + FILES:=$(LINUX_DIR)/drivers/net/mdio/acpi_mdio.ko + AUTOLOAD:=$(call AutoLoad,11,acpi_mdio) +endef + +define KernelPackage/acpi-mdio/description + Kernel driver for ACPI MDIO support +endef + +$(eval $(call KernelPackage,acpi-mdio)) + +define KernelPackage/fsl-pcs-lynx + SUBMENU=$(NETWORK_DEVICES_MENU) + DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-phylink + TITLE:=NXP (Freescale) Lynx PCS + HIDDEN:=1 + KCONFIG:=CONFIG_PCS_LYNX + FILES=$(LINUX_DIR)/drivers/net/pcs/pcs-lynx.ko + AUTOLOAD=$(call AutoLoad,30,pcs-lynx) +endef + +$(eval $(call KernelPackage,fsl-pcs-lynx)) + +define KernelPackage/fsl-xgmac-mdio + SUBMENU=$(NETWORK_DEVICES_MENU) + DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio + TITLE:=NXP (Freescale) MDIO bus + KCONFIG:=CONFIG_FSL_XGMAC_MDIO + FILES=$(LINUX_DIR)/drivers/net/ethernet/freescale/xgmac_mdio.ko + AUTOLOAD=$(call AutoLoad,30,xgmac_mdio) +endef + +$(eval $(call KernelPackage,fsl-xgmac-mdio)) + +define KernelPackage/fsl-mc-dpio + SUBMENU:=$(OTHER_MENU) + TITLE:=NXP DPAA2 DPIO (Data Path IO) driver + HIDDEN:=1 + KCONFIG:=CONFIG_FSL_MC_BUS=y \ + CONFIG_FSL_MC_DPIO + FILES:=$(LINUX_DIR)/drivers/soc/fsl/dpio/fsl-mc-dpio.ko + AUTOLOAD=$(call AutoLoad,30,fsl-mc-dpio) +endef + +$(eval $(call KernelPackage,fsl-mc-dpio)) + +define KernelPackage/fsl-dpaa2-net + SUBMENU:=$(NETWORK_DEVICES_MENU) + TITLE:=NXP DPAA2 Ethernet + DEPENDS:=@(TARGET_armvirt_64) +kmod-fsl-xgmac-mdio +kmod-phylink \ + +kmod-fsl-pcs-lynx +kmod-fsl-mc-dpio + KCONFIG:= \ + CONFIG_FSL_MC_UAPI_SUPPORT=y \ + CONFIG_FSL_DPAA2_ETH + FILES:= \ + $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa2/fsl-dpaa2-eth.ko + AUTOLOAD=$(call AutoLoad,35,fsl-dpaa2-eth) +endef + +$(eval $(call KernelPackage,fsl-dpaa2-net)) + +define KernelPackage/fsl-dpaa2-console + SUBMENU:=$(OTHER_MENU) + TITLE:=NXP DPAA2 Debug console + DEPENDS:=@(TARGET_armvirt_64) + KCONFIG:=CONFIG_DPAA2_CONSOLE + FILES=$(LINUX_DIR)/drivers/soc/fsl/dpaa2-console.ko + AUTOLOAD=$(call AutoLoad,40,dpaa2-console) +endef + +define KernelPackage/fsl-dpaa2-console/description + Kernel modules for the NXP DPAA2 debug consoles + (Management Complex and AIOP). +endef + +$(eval $(call KernelPackage,fsl-dpaa2-console)) + +define KernelPackage/wdt-sp805 + SUBMENU:=$(OTHER_MENU) + TITLE:=ARM SP805 Watchdog + KCONFIG:=CONFIG_ARM_SP805_WATCHDOG + FILES=$(LINUX_DIR)/drivers/watchdog/sp805_wdt.ko + AUTOLOAD=$(call AutoLoad,50,sp805_wdt) +endef + +define KernelPackage/wdt-sp805/description + Support for the ARM SP805 wathchdog module. + This is present in the NXP Layerscape family, + HiSilicon HI3660 among others. +endef + +$(eval $(call KernelPackage,wdt-sp805))