From: Birger Koblitz Date: Tue, 7 Sep 2021 13:30:29 +0000 (+0200) Subject: realtek: Add driver support for TC offloading X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=54805fc91186228eec0ce14f7c5a6b4149b0a244;p=openwrt%2Fstaging%2Fblogic.git realtek: Add driver support for TC offloading This adds support for offloading TC flower by using the Packet Inspection Engine of the RTL-SoCs. Basic infrastructure support is provide with callbacks to the tc subsystem and support for HW packet counters. Signed-off-by: Birger Koblitz --- diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Makefile b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Makefile index 016184c3d999..8752c797004d 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Makefile +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/Makefile @@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_NET_DSA_RTL83XX) += common.o dsa.o \ - rtl838x.o rtl839x.o rtl930x.o rtl931x.o debugfs.o qos.o + rtl838x.o rtl839x.o rtl930x.o rtl931x.o debugfs.o qos.o tc.o diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c index 25ac2d4679f8..dc783705f1cf 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c @@ -449,6 +449,62 @@ int rtl83xx_lag_del(struct dsa_switch *ds, int group, int port) return 0; } +/* + * Allocate a 64 bit octet counter located in the LOG HW table + */ +static int rtl83xx_octet_cntr_alloc(struct rtl838x_switch_priv *priv) +{ + int idx; + + mutex_lock(&priv->reg_mutex); + + idx = find_first_zero_bit(priv->octet_cntr_use_bm, MAX_COUNTERS); + if (idx >= priv->n_counters) { + mutex_unlock(&priv->reg_mutex); + return -1; + } + + set_bit(idx, priv->octet_cntr_use_bm); + mutex_unlock(&priv->reg_mutex); + + return idx; +} + +/* + * Allocate a 32-bit packet counter + * 2 32-bit packet counters share the location of a 64-bit octet counter + * Initially there are no free packet counters and 2 new ones need to be freed + * by allocating the corresponding octet counter + */ +int rtl83xx_packet_cntr_alloc(struct rtl838x_switch_priv *priv) +{ + int idx, j; + + mutex_lock(&priv->reg_mutex); + + /* Because initially no packet counters are free, the logic is reversed: + * a 0-bit means the counter is already allocated (for octets) + */ + idx = find_first_bit(priv->packet_cntr_use_bm, MAX_COUNTERS * 2); + if (idx >= priv->n_counters * 2) { + j = find_first_zero_bit(priv->octet_cntr_use_bm, MAX_COUNTERS); + if (j >= priv->n_counters) { + mutex_unlock(&priv->reg_mutex); + return -1; + } + set_bit(j, priv->octet_cntr_use_bm); + idx = j * 2; + set_bit(j * 2 + 1, priv->packet_cntr_use_bm); + + } else { + clear_bit(idx, priv->packet_cntr_use_bm); + } + + mutex_unlock(&priv->reg_mutex); + + return idx; +} + static int rtl83xx_handle_changeupper(struct rtl838x_switch_priv *priv, struct net_device *ndev, struct netdev_notifier_changeupper_info *info) @@ -499,6 +555,30 @@ out: return 0; } +/* + * Is the lower network device a DSA slave network device of our RTL930X-switch? + * Unfortunately we cannot just follow dev->dsa_prt as this is only set for the + * DSA master device. + */ +int rtl83xx_port_is_under(const struct net_device * dev, struct rtl838x_switch_priv *priv) +{ + int i; + +// TODO: On 5.12: +// if(!dsa_slave_dev_check(dev)) { +// netdev_info(dev, "%s: not a DSA device.\n", __func__); +// return -EINVAL; +// } + + for (i = 0; i < priv->cpu_port; i++) { + if (!priv->ports[i].dp) + continue; + if (priv->ports[i].dp->slave == dev) + return i; + } + return -EINVAL; +} + static int rtl83xx_netdevice_event(struct notifier_block *this, unsigned long event, void *ptr) { @@ -568,6 +648,9 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev) rtl8380_get_version(priv); priv->n_lags = 8; priv->l2_bucket_size = 4; + priv->n_pie_blocks = 12; + priv->port_ignore = 0x1f; + priv->n_counters = 128; break; case RTL8390_FAMILY_ID: priv->ds->ops = &rtl83xx_switch_ops; @@ -581,6 +664,9 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev) rtl8390_get_version(priv); priv->n_lags = 16; priv->l2_bucket_size = 4; + priv->n_pie_blocks = 18; + priv->port_ignore = 0x3f; + priv->n_counters = 1024; break; case RTL9300_FAMILY_ID: priv->ds->ops = &rtl930x_switch_ops; @@ -595,6 +681,9 @@ static int __init rtl83xx_sw_probe(struct platform_device *pdev) priv->n_lags = 16; sw_w32(1, RTL930X_ST_CTRL); priv->l2_bucket_size = 8; + priv->n_pie_blocks = 16; + priv->port_ignore = 0x3f; + priv->n_counters = 2048; break; case RTL9310_FAMILY_ID: priv->ds->ops = &rtl930x_switch_ops; diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c index 6c0ed5ae0094..c79b4b2c8117 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/dsa.c @@ -188,6 +188,8 @@ static int rtl83xx_setup(struct dsa_switch *ds) rtl83xx_enable_phy_polling(priv); pr_debug("Please wait until PHY is settled\n"); msleep(1000); + priv->r->pie_init(priv); + return 0; } @@ -228,6 +230,8 @@ static int rtl930x_setup(struct dsa_switch *ds) rtl83xx_enable_phy_polling(priv); + priv->r->pie_init(priv); + return 0; } diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h index b2097363b976..a3e169f2887a 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl838x.h @@ -338,12 +338,45 @@ /* Debug features */ #define RTL930X_STAT_PRVTE_DROP_COUNTER0 (0xB5B8) +/* Packet Inspection Engine */ +#define RTL838X_METER_GLB_CTRL (0x4B08) +#define RTL839X_METER_GLB_CTRL (0x1300) +#define RTL930X_METER_GLB_CTRL (0xa0a0) +#define RTL839X_ACL_CTRL (0x1288) +#define RTL838X_ACL_BLK_LOOKUP_CTRL (0x6100) +#define RTL839X_ACL_BLK_LOOKUP_CTRL (0x1280) +#define RTL930X_PIE_BLK_LOOKUP_CTRL (0xa5a0) +#define RTL838X_ACL_BLK_PWR_CTRL (0x6104) +#define RTL839X_PS_ACL_PWR_CTRL (0x049c) +#define RTL838X_ACL_BLK_TMPLTE_CTRL(block) (0x6108 + ((block) << 2)) +#define RTL839X_ACL_BLK_TMPLTE_CTRL(block) (0x128c + ((block) << 2)) +#define RTL930X_PIE_BLK_TMPLTE_CTRL(block) (0xa624 + ((block) << 2)) +#define RTL838X_ACL_BLK_GROUP_CTRL (0x615C) +#define RTL839X_ACL_BLK_GROUP_CTRL (0x12ec) +#define RTL838X_ACL_CLR_CTRL (0x6168) +#define RTL839X_ACL_CLR_CTRL (0x12fc) +#define RTL930X_PIE_CLR_CTRL (0xa66c) +#define RTL838X_DMY_REG27 (0x3378) +#define RTL838X_ACL_PORT_LOOKUP_CTRL(p) (0x616C + (((p) << 2))) +#define RTL930X_ACL_PORT_LOOKUP_CTRL(p) (0xA784 + (((p) << 2))) +#define RTL930X_PIE_BLK_PHASE_CTRL (0xA5A4) + +// PIE actions +#define PIE_ACT_COPY_TO_PORT 2 +#define PIE_ACT_REDIRECT_TO_PORT 4 +#define PIE_ACT_ROUTE_UC 6 +#define PIE_ACT_VID_ASSIGN 0 + #define MAX_VLANS 4096 #define MAX_LAGS 16 #define MAX_PRIOS 8 #define RTL930X_PORT_IGNORE 0x3f #define MAX_MC_GROUPS 512 #define UNKNOWN_MC_PMASK (MAX_MC_GROUPS - 1) +#define PIE_BLOCK_SIZE 128 +#define MAX_PIE_ENTRIES (18 * PIE_BLOCK_SIZE) +#define N_FIXED_FIELDS 12 +#define MAX_COUNTERS 2048 enum phy_type { PHY_NONE = 0, @@ -409,6 +442,166 @@ struct rtl838x_l2_entry { bool nh_vlan_target; // Only RTL83xx: VLAN used for next hop }; +enum fwd_rule_action { + FWD_RULE_ACTION_NONE = 0, + FWD_RULE_ACTION_FWD = 1, +}; + +enum pie_phase { + PHASE_VACL = 0, + PHASE_IACL = 1, +}; + +/* Intermediate representation of a Packet Inspection Engine Rule + * as suggested by the Kernel's tc flower offload subsystem + * Field meaning is universal across SoC families, but data content is specific + * to SoC family (e.g. because of different port ranges) */ +struct pie_rule { + int id; + enum pie_phase phase; // Phase in which this template is applied + int packet_cntr; // ID of a packet counter assigned to this rule + int octet_cntr; // ID of a byte counter assigned to this rule + u32 last_packet_cnt; + u64 last_octet_cnt; + + // The following are requirements for the pie template + bool is_egress; + bool is_ipv6; // This is a rule with IPv6 fields + + // Fixed fields that are always matched against on RTL8380 + u8 spmmask_fix; + u8 spn; // Source port number + bool stacking_port; // Source port is stacking port + bool mgnt_vlan; // Packet arrived on management VLAN + bool dmac_hit_sw; // The packet's destination MAC matches one of the device's + bool content_too_deep; // The content of the packet cannot be parsed: too many layers + bool not_first_frag; // Not the first IP fragment + u8 frame_type_l4; // 0: UDP, 1: TCP, 2: ICMP/ICMPv6, 3: IGMP + u8 frame_type; // 0: ARP, 1: L2 only, 2: IPv4, 3: IPv6 + bool otag_fmt; // 0: outer tag packet, 1: outer priority tag or untagged + bool itag_fmt; // 0: inner tag packet, 1: inner priority tag or untagged + bool otag_exist; // packet with outer tag + bool itag_exist; // packet with inner tag + bool frame_type_l2; // 0: Ethernet, 1: LLC_SNAP, 2: LLC_Other, 3: Reserved + bool igr_normal_port; // Ingress port is not cpu or stacking port + u8 tid; // The template ID defining the what the templated fields mean + + // Masks for the fields that are always matched against on RTL8380 + u8 spmmask_fix_m; + u8 spn_m; + bool stacking_port_m; + bool mgnt_vlan_m; + bool dmac_hit_sw_m; + bool content_too_deep_m; + bool not_first_frag_m; + u8 frame_type_l4_m; + u8 frame_type_m; + bool otag_fmt_m; + bool itag_fmt_m; + bool otag_exist_m; + bool itag_exist_m; + bool frame_type_l2_m; + bool igr_normal_port_m; + u8 tid_m; + + // Logical operations between rules, special rules for rule numbers apply + bool valid; + bool cond_not; // Matches when conditions not match + bool cond_and1; // And this rule 2n with the next rule 2n+1 in same block + bool cond_and2; // And this rule m in block 2n with rule m in block 2n+1 + bool ivalid; + + // Actions to be performed + bool drop; // Drop the packet + bool fwd_sel; // Forward packet: to port, portmask, dest route, next rule, drop + bool ovid_sel; // So something to outer vlan-id: shift, re-assign + bool ivid_sel; // Do something to inner vlan-id: shift, re-assign + bool flt_sel; // Filter the packet when sending to certain ports + bool log_sel; // Log the packet in one of the LOG-table counters + bool rmk_sel; // Re-mark the packet, i.e. change the priority-tag + bool meter_sel; // Meter the packet, i.e. limit rate of this type of packet + bool tagst_sel; // Change the ergress tag + bool mir_sel; // Mirror the packet to a Link Aggregation Group + bool nopri_sel; // Change the normal priority + bool cpupri_sel; // Change the CPU priority + bool otpid_sel; // Change Outer Tag Protocol Identifier (802.1q) + bool itpid_sel; // Change Inner Tag Protocol Identifier (802.1q) + bool shaper_sel; // Apply traffic shaper + bool mpls_sel; // MPLS actions + bool bypass_sel; // Bypass actions + bool fwd_sa_lrn; // Learn the source address when forwarding + bool fwd_mod_to_cpu; // Forward the modified VLAN tag format to CPU-port + + // Fields used in predefined templates 0-2 on RTL8380 / 90 / 9300 + u64 spm; // Source Port Matrix + u16 otag; // Outer VLAN-ID + u8 smac[ETH_ALEN]; // Source MAC address + u8 dmac[ETH_ALEN]; // Destination MAC address + u16 ethertype; // Ethernet frame type field in ethernet header + u16 itag; // Inner VLAN-ID + u16 field_range_check; + u32 sip; // Source IP + struct in6_addr sip6; // IPv6 Source IP + u32 dip; // Destination IP + struct in6_addr dip6; // IPv6 Destination IP + u16 tos_proto; // IPv4: TOS + Protocol fields, IPv6: Traffic class + next header + u16 sport; // TCP/UDP source port + u16 dport; // TCP/UDP destination port + u16 icmp_igmp; + u16 tcp_info; + u16 dsap_ssap; // Destination / Source Service Access Point bytes (802.3) + + u64 spm_m; + u16 otag_m; + u8 smac_m[ETH_ALEN]; + u8 dmac_m[ETH_ALEN]; + u8 ethertype_m; + u16 itag_m; + u16 field_range_check_m; + u32 sip_m; + struct in6_addr sip6_m; // IPv6 Source IP mask + u32 dip_m; + struct in6_addr dip6_m; // IPv6 Destination IP mask + u16 tos_proto_m; + u16 sport_m; + u16 dport_m; + u16 icmp_igmp_m; + u16 tcp_info_m; + u16 dsap_ssap_m; + + // Data associated with actions + u8 fwd_act; // Type of forwarding action + // 0: permit, 1: drop, 2: copy to port id, 4: copy to portmask + // 4: redirect to portid, 5: redirect to portmask + // 6: route, 7: vlan leaky (only 8380) + u16 fwd_data; // Additional data for forwarding action, e.g. destination port + u8 ovid_act; + u16 ovid_data; // Outer VLAN ID + u8 ivid_act; + u16 ivid_data; // Inner VLAN ID + u16 flt_data; // Filtering data + u16 log_data; // ID of packet or octet counter in LOG table, on RTL93xx + // unnecessary since PIE-Rule-ID == LOG-counter-ID + bool log_octets; + u8 mpls_act; // MPLS action type + u16 mpls_lib_idx; // MPLS action data + + u16 rmk_data; // Data for remarking + u16 meter_data; // ID of meter for bandwidth control + u16 tagst_data; + u16 mir_data; + u16 nopri_data; + u16 cpupri_data; + u16 otpid_data; + u16 itpid_data; + u16 shaper_data; + + // Bypass actions, ignored on RTL8380 + bool bypass_all; // Not clear + bool bypass_igr_stp; // Bypass Ingress STP state + bool bypass_ibc_sc; // Bypass Ingress Bandwidth Control and Storm Control +}; + struct rtl838x_nexthop { u16 id; // ID in HW Nexthop table u32 ip; // IP Addres of nexthop @@ -424,6 +617,15 @@ struct rtl838x_nexthop { struct rtl838x_switch_priv; +struct rtl83xx_flow { + unsigned long cookie; + struct rhash_head node; + struct rcu_head rcu_head; + struct rtl838x_switch_priv *priv; + struct pie_rule rule; + u32 flags; +}; + struct rtl838x_reg { void (*mask_port_reg_be)(u64 clear, u64 set, int reg); void (*set_port_reg_be)(u64 set, int reg); @@ -491,6 +693,13 @@ struct rtl838x_reg { u64 (*read_mcast_pmask)(int idx); void (*write_mcast_pmask)(int idx, u64 portmask); void (*vlan_fwd_on_inner)(int port, bool is_set); + void (*pie_init)(struct rtl838x_switch_priv *priv); + int (*pie_rule_read)(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr); + int (*pie_rule_write)(struct rtl838x_switch_priv *priv, int idx, struct pie_rule *pr); + int (*pie_rule_add)(struct rtl838x_switch_priv *priv, struct pie_rule *rule); + void (*pie_rule_rm)(struct rtl838x_switch_priv *priv, struct pie_rule *rule); + u32 (*packet_cntr_read)(int counter); + void (*packet_cntr_clear)(int counter); }; struct rtl838x_switch_priv { @@ -501,7 +710,8 @@ struct rtl838x_switch_priv { u16 family_id; char version; struct rtl838x_port ports[57]; - struct mutex reg_mutex; + struct mutex reg_mutex; // Mutex for individual register manipulations + struct mutex pie_mutex; // Mutex for Packet Inspection Engine int link_state_irq; int mirror_group_ports[4]; struct mii_bus *mii_bus; @@ -509,6 +719,7 @@ struct rtl838x_switch_priv { u8 cpu_port; u8 port_mask; u8 port_width; + u8 port_ignore; u64 irq_mask; u32 fib_entries; int l2_bucket_size; @@ -519,6 +730,12 @@ struct rtl838x_switch_priv { struct notifier_block nb; bool eee_enabled; unsigned long int mc_group_bm[MAX_MC_GROUPS >> 5]; + int n_pie_blocks; + struct rhashtable tc_ht; + unsigned long int pie_use_bm[MAX_PIE_ENTRIES >> 5]; + int n_counters; + unsigned long int octet_cntr_use_bm[MAX_COUNTERS >> 5]; + unsigned long int packet_cntr_use_bm[MAX_COUNTERS >> 4]; }; void rtl838x_dbgfs_init(struct rtl838x_switch_priv *priv); diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl83xx.h b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl83xx.h index fd0455a6cd63..ffd37aa5a836 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl83xx.h +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/rtl83xx.h @@ -74,6 +74,11 @@ inline u32 rtl_table_data_r(struct table_reg *r, int i); inline void rtl_table_data_w(struct table_reg *r, u32 v, int i); void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv); + +int rtl83xx_packet_cntr_alloc(struct rtl838x_switch_priv *priv); + +int rtl83xx_port_is_under(const struct net_device * dev, struct rtl838x_switch_priv *priv); + int read_phy(u32 port, u32 page, u32 reg, u32 *val); int write_phy(u32 port, u32 page, u32 reg, u32 val); diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/tc.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/tc.c new file mode 100644 index 000000000000..d0a8ee8cfe4b --- /dev/null +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/tc.c @@ -0,0 +1,409 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include +#include +#include +#include +#include + +#include +#include "rtl83xx.h" +#include "rtl838x.h" + +/* + * Parse the flow rule for the matching conditions + */ +static int rtl83xx_parse_flow_rule(struct rtl838x_switch_priv *priv, + struct flow_rule *rule, struct rtl83xx_flow *flow) +{ + struct flow_dissector *dissector = rule->match.dissector; + + pr_debug("In %s\n", __func__); + /* KEY_CONTROL and KEY_BASIC are needed for forming a meaningful key */ + if ((dissector->used_keys & BIT(FLOW_DISSECTOR_KEY_CONTROL)) == 0 || + (dissector->used_keys & BIT(FLOW_DISSECTOR_KEY_BASIC)) == 0) { + pr_err("Cannot form TC key: used_keys = 0x%x\n", dissector->used_keys); + return -EOPNOTSUPP; + } + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) { + struct flow_match_basic match; + + pr_debug("%s: BASIC\n", __func__); + flow_rule_match_basic(rule, &match); + if (match.key->n_proto == htons(ETH_P_ARP)) + flow->rule.frame_type = 0; + if (match.key->n_proto == htons(ETH_P_IP)) + flow->rule.frame_type = 2; + if (match.key->n_proto == htons(ETH_P_IPV6)) + flow->rule.frame_type = 3; + if ((match.key->n_proto == htons(ETH_P_ARP)) || flow->rule.frame_type) + flow->rule.frame_type_m = 3; + if (flow->rule.frame_type >= 2) { + if (match.key->ip_proto == IPPROTO_UDP) + flow->rule.frame_type_l4 = 0; + if (match.key->ip_proto == IPPROTO_TCP) + flow->rule.frame_type_l4 = 1; + if (match.key->ip_proto == IPPROTO_ICMP + || match.key->ip_proto ==IPPROTO_ICMPV6) + flow->rule.frame_type_l4 = 2; + if (match.key->ip_proto == IPPROTO_TCP) + flow->rule.frame_type_l4 = 3; + if ((match.key->ip_proto == IPPROTO_UDP) || flow->rule.frame_type_l4) + flow->rule.frame_type_l4_m = 7; + } + } + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) { + struct flow_match_eth_addrs match; + + pr_debug("%s: ETH_ADDR\n", __func__); + flow_rule_match_eth_addrs(rule, &match); + ether_addr_copy(flow->rule.dmac, match.key->dst); + ether_addr_copy(flow->rule.dmac_m, match.mask->dst); + ether_addr_copy(flow->rule.smac, match.key->src); + ether_addr_copy(flow->rule.smac_m, match.mask->src); + } + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_VLAN)) { + struct flow_match_vlan match; + + pr_debug("%s: VLAN\n", __func__); + flow_rule_match_vlan(rule, &match); + flow->rule.itag = match.key->vlan_id; + flow->rule.itag_m = match.mask->vlan_id; + // TODO: What about match.key->vlan_priority ? + } + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV4_ADDRS)) { + struct flow_match_ipv4_addrs match; + + pr_debug("%s: IPV4\n", __func__); + flow_rule_match_ipv4_addrs(rule, &match); + flow->rule.is_ipv6 = false; + flow->rule.dip = match.key->dst; + flow->rule.dip_m = match.mask->dst; + flow->rule.sip = match.key->src; + flow->rule.sip_m = match.mask->src; + } else if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_IPV6_ADDRS)) { + struct flow_match_ipv6_addrs match; + + pr_debug("%s: IPV6\n", __func__); + flow->rule.is_ipv6 = true; + flow_rule_match_ipv6_addrs(rule, &match); + flow->rule.dip6 = match.key->dst; + flow->rule.dip6_m = match.mask->dst; + flow->rule.sip6 = match.key->src; + flow->rule.sip6_m = match.mask->src; + } + + if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_PORTS)) { + struct flow_match_ports match; + + pr_debug("%s: PORTS\n", __func__); + flow_rule_match_ports(rule, &match); + flow->rule.dport = match.key->dst; + flow->rule.dport_m = match.mask->dst; + flow->rule.sport = match.key->src; + flow->rule.sport_m = match.mask->src; + } + + // TODO: ICMP + return 0; +} + +static void rtl83xx_flow_bypass_all(struct rtl83xx_flow *flow) +{ + flow->rule.bypass_sel = true; + flow->rule.bypass_all = true; + flow->rule.bypass_igr_stp = true; + flow->rule.bypass_ibc_sc = true; +} + +static int rtl83xx_parse_fwd(struct rtl838x_switch_priv *priv, + const struct flow_action_entry *act, struct rtl83xx_flow *flow) +{ + struct net_device *dev = act->dev; + int port; + + port = rtl83xx_port_is_under(dev, priv); + if (port < 0) { + netdev_info(dev, "%s: not a DSA device.\n", __func__); + return -EINVAL; + } + + flow->rule.fwd_sel = true; + flow->rule.fwd_data = port; + pr_debug("Using port index: %d\n", port); + rtl83xx_flow_bypass_all(flow); + + return 0; +} + +static int rtl83xx_add_flow(struct rtl838x_switch_priv *priv, struct flow_cls_offload *f, + struct rtl83xx_flow *flow) +{ + struct flow_rule *rule = flow_cls_offload_flow_rule(f); + const struct flow_action_entry *act; + int i, err; + + pr_debug("%s\n", __func__); + + rtl83xx_parse_flow_rule(priv, rule, flow); + + flow_action_for_each(i, act, &rule->action) { + switch (act->id) { + case FLOW_ACTION_DROP: + pr_debug("%s: DROP\n", __func__); + flow->rule.drop = true; + rtl83xx_flow_bypass_all(flow); + return 0; + + case FLOW_ACTION_TRAP: + pr_debug("%s: TRAP\n", __func__); + flow->rule.fwd_data = priv->cpu_port; + flow->rule.fwd_act = PIE_ACT_REDIRECT_TO_PORT; + rtl83xx_flow_bypass_all(flow); + break; + + case FLOW_ACTION_MANGLE: + pr_err("%s: FLOW_ACTION_MANGLE not supported\n", __func__); + return -EOPNOTSUPP; + + case FLOW_ACTION_ADD: + pr_err("%s: FLOW_ACTION_ADD not supported\n", __func__); + return -EOPNOTSUPP; + + case FLOW_ACTION_VLAN_PUSH: + pr_debug("%s: VLAN_PUSH\n", __func__); +// TODO: act->vlan.proto + flow->rule.ivid_act = PIE_ACT_VID_ASSIGN; + flow->rule.ivid_sel = true; + flow->rule.ivid_data = htons(act->vlan.vid); + flow->rule.ovid_act = PIE_ACT_VID_ASSIGN; + flow->rule.ovid_sel = true; + flow->rule.ovid_data = htons(act->vlan.vid); + flow->rule.fwd_mod_to_cpu = true; + break; + + case FLOW_ACTION_VLAN_POP: + pr_debug("%s: VLAN_POP\n", __func__); + flow->rule.ivid_act = PIE_ACT_VID_ASSIGN; + flow->rule.ivid_data = 0; + flow->rule.ivid_sel = true; + flow->rule.ovid_act = PIE_ACT_VID_ASSIGN; + flow->rule.ovid_data = 0; + flow->rule.ovid_sel = true; + flow->rule.fwd_mod_to_cpu = true; + break; + + case FLOW_ACTION_CSUM: + pr_err("%s: FLOW_ACTION_CSUM not supported\n", __func__); + return -EOPNOTSUPP; + + case FLOW_ACTION_REDIRECT: + pr_debug("%s: REDIRECT\n", __func__); + err = rtl83xx_parse_fwd(priv, act, flow); + if (err) + return err; + flow->rule.fwd_act = PIE_ACT_REDIRECT_TO_PORT; + break; + + case FLOW_ACTION_MIRRED: + pr_debug("%s: MIRRED\n", __func__); + err = rtl83xx_parse_fwd(priv, act, flow); + if (err) + return err; + flow->rule.fwd_act = PIE_ACT_COPY_TO_PORT; + break; + + default: + pr_err("%s: Flow action not supported: %d\n", __func__, act->id); + return -EOPNOTSUPP; + } + } + + return 0; +} + +static const struct rhashtable_params tc_ht_params = { + .head_offset = offsetof(struct rtl83xx_flow, node), + .key_offset = offsetof(struct rtl83xx_flow, cookie), + .key_len = sizeof(((struct rtl83xx_flow *)0)->cookie), + .automatic_shrinking = true, +}; + +static int rtl83xx_configure_flower(struct rtl838x_switch_priv *priv, + struct flow_cls_offload *f) +{ + struct rtl83xx_flow *flow; + int err = 0; + + pr_debug("In %s\n", __func__); + + rcu_read_lock(); + pr_debug("Cookie %08lx\n", f->cookie); + flow = rhashtable_lookup(&priv->tc_ht, &f->cookie, tc_ht_params); + if (flow) { + pr_info("%s: Got flow\n", __func__); + err = -EEXIST; + goto rcu_unlock; + } + +rcu_unlock: + rcu_read_unlock(); + if (flow) + goto out; + pr_debug("%s: New flow\n", __func__); + + flow = kzalloc(sizeof(*flow), GFP_KERNEL); + if (!flow) { + err = -ENOMEM; + goto out; + } + + flow->cookie = f->cookie; + flow->priv = priv; + + err = rhashtable_insert_fast(&priv->tc_ht, &flow->node, tc_ht_params); + if (err) { + pr_err("Could not insert add new rule\n"); + goto out_free; + } + + rtl83xx_add_flow(priv, f, flow); // TODO: check error + + // Add log action to flow + flow->rule.packet_cntr = rtl83xx_packet_cntr_alloc(priv); + if (flow->rule.packet_cntr >= 0) { + pr_debug("Using packet counter %d\n", flow->rule.packet_cntr); + flow->rule.log_sel = true; + flow->rule.log_data = flow->rule.packet_cntr; + } + + err = priv->r->pie_rule_add(priv, &flow->rule); + return err; + +out_free: + kfree(flow); +out: + pr_err("%s: error %d\n", __func__, err); + return err; +} + +static int rtl83xx_delete_flower(struct rtl838x_switch_priv *priv, + struct flow_cls_offload * cls_flower) +{ + struct rtl83xx_flow *flow; + + pr_debug("In %s\n", __func__); + rcu_read_lock(); + flow = rhashtable_lookup_fast(&priv->tc_ht, &cls_flower->cookie, tc_ht_params); + if (!flow) { + rcu_read_unlock(); + return -EINVAL; + } + + priv->r->pie_rule_rm(priv, &flow->rule); + + rhashtable_remove_fast(&priv->tc_ht, &flow->node, tc_ht_params); + + kfree_rcu(flow, rcu_head); + + rcu_read_unlock(); + return 0; +} + +static int rtl83xx_stats_flower(struct rtl838x_switch_priv *priv, + struct flow_cls_offload * cls_flower) +{ + struct rtl83xx_flow *flow; + unsigned long lastused = 0; + int total_packets, new_packets; + + pr_debug("%s: \n", __func__); + flow = rhashtable_lookup_fast(&priv->tc_ht, &cls_flower->cookie, tc_ht_params); + if (!flow) + return -1; + + if (flow->rule.packet_cntr >= 0) { + total_packets = priv->r->packet_cntr_read(flow->rule.packet_cntr); + pr_debug("Total packets: %d\n", total_packets); + new_packets = total_packets - flow->rule.last_packet_cnt; + flow->rule.last_packet_cnt = total_packets; + } + + // TODO: We need a second PIE rule to count the bytes + flow_stats_update(&cls_flower->stats, 100 * new_packets, new_packets, 0, lastused, + FLOW_ACTION_HW_STATS_IMMEDIATE); + return 0; +} + +static int rtl83xx_setup_tc_cls_flower(struct rtl838x_switch_priv *priv, + struct flow_cls_offload *cls_flower) +{ + pr_debug("%s: %d\n", __func__, cls_flower->command); + switch (cls_flower->command) { + case FLOW_CLS_REPLACE: + return rtl83xx_configure_flower(priv, cls_flower); + case FLOW_CLS_DESTROY: + return rtl83xx_delete_flower(priv, cls_flower); + case FLOW_CLS_STATS: + return rtl83xx_stats_flower(priv, cls_flower); + default: + return -EOPNOTSUPP; + } +} + + +static int rtl83xx_setup_tc_block_cb(enum tc_setup_type type, void *type_data, + void *cb_priv) +{ + struct rtl838x_switch_priv *priv = cb_priv; + + switch (type) { + case TC_SETUP_CLSFLOWER: + pr_debug("%s: TC_SETUP_CLSFLOWER\n", __func__); + return rtl83xx_setup_tc_cls_flower(priv, type_data); + default: + return -EOPNOTSUPP; + } +} + +static LIST_HEAD(rtl83xx_block_cb_list); + +int rtl83xx_setup_tc(struct net_device *dev, enum tc_setup_type type, void *type_data) +{ + struct rtl838x_switch_priv *priv; + struct flow_block_offload *f = type_data; + static bool first_time = true; + int err; + + pr_debug("%s: %d\n", __func__, type); + + if(!netdev_uses_dsa(dev)) { + pr_err("%s: no DSA\n", __func__); + return 0; + } + priv = dev->dsa_ptr->ds->priv; + + switch (type) { + case TC_SETUP_BLOCK: + if (first_time) { + first_time = false; + err = rhashtable_init(&priv->tc_ht, &tc_ht_params); + if (err) + pr_err("%s: Could not initialize hash table\n", __func__); + } + + f->unlocked_driver_cb = true; + return flow_block_cb_setup_simple(type_data, + &rtl83xx_block_cb_list, + rtl83xx_setup_tc_block_cb, + priv, priv, true); + default: + return -EOPNOTSUPP; + } + + return 0; +} diff --git a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c index 0d9ced9b6ce4..c966746f0246 100644 --- a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c +++ b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.c @@ -1927,6 +1927,7 @@ static const struct net_device_ops rtl838x_eth_netdev_ops = { .ndo_tx_timeout = rtl838x_eth_tx_timeout, .ndo_set_features = rtl83xx_set_features, .ndo_fix_features = rtl838x_fix_features, + .ndo_setup_tc = rtl83xx_setup_tc, }; static const struct net_device_ops rtl839x_eth_netdev_ops = { @@ -1940,6 +1941,7 @@ static const struct net_device_ops rtl839x_eth_netdev_ops = { .ndo_tx_timeout = rtl838x_eth_tx_timeout, .ndo_set_features = rtl83xx_set_features, .ndo_fix_features = rtl838x_fix_features, + .ndo_setup_tc = rtl83xx_setup_tc, }; static const struct net_device_ops rtl930x_eth_netdev_ops = { @@ -1953,6 +1955,7 @@ static const struct net_device_ops rtl930x_eth_netdev_ops = { .ndo_tx_timeout = rtl838x_eth_tx_timeout, .ndo_set_features = rtl93xx_set_features, .ndo_fix_features = rtl838x_fix_features, + .ndo_setup_tc = rtl83xx_setup_tc, }; static const struct net_device_ops rtl931x_eth_netdev_ops = { diff --git a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h index c7e97057b332..d2691bfaf587 100644 --- a/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h +++ b/target/linux/realtek/files-5.10/drivers/net/ethernet/rtl838x_eth.h @@ -424,6 +424,6 @@ int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val); int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val); int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val); int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val); -void rtl9300_sds_power(int sds_num, int val); +int rtl83xx_setup_tc(struct net_device *dev, enum tc_setup_type type, void *type_data); #endif /* _RTL838X_ETH_H */