From: Felix Fietkau Date: Sat, 26 Jun 2010 20:43:41 +0000 (+0000) Subject: remove linux 2.4 support from several packages X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=543d870e824730d0a85e4c999d9c21f58f0737b1;p=openwrt%2Fstaging%2Frobimarko.git remove linux 2.4 support from several packages SVN-Revision: 21954 --- diff --git a/package/bridge-utils/Makefile b/package/bridge-utils/Makefile index 35b883884c..0b6eaecb87 100644 --- a/package/bridge-utils/Makefile +++ b/package/bridge-utils/Makefile @@ -11,16 +11,8 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=bridge-utils PKG_RELEASE:=1 PKG_SOURCE_URL:=@SF/bridge - -ifeq ($(CONFIG_LINUX_2_4),y) - PKG_VERSION:=1.0.6 - PKG_MD5SUM:=9b7dc52656f5cbec846a7ba3299f73bd -endif - -ifeq ($(CONFIG_LINUX_2_6),y) - PKG_VERSION:=1.4 - PKG_MD5SUM:=0182fcac3a2b307113bbec34e5f1c673 -endif +PKG_VERSION:=1.4 +PKG_MD5SUM:=0182fcac3a2b307113bbec34e5f1c673 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz diff --git a/package/broadcom-diag/Makefile b/package/broadcom-diag/Makefile index e9113c4c26..6b6dddd8a6 100644 --- a/package/broadcom-diag/Makefile +++ b/package/broadcom-diag/Makefile @@ -15,7 +15,7 @@ include $(INCLUDE_DIR)/package.mk define KernelPackage/diag SUBMENU:=Other modules - DEPENDS:=@TARGET_brcm_2_4||TARGET_brcm47xx + DEPENDS:=@TARGET_brcm47xx TITLE:=Driver for router LEDs and Buttons FILES:=$(PKG_BUILD_DIR)/diag.$(LINUX_KMOD_SUFFIX) endef @@ -25,10 +25,6 @@ define Build/Prepare $(CP) ./src/* $(PKG_BUILD_DIR)/ endef -ifeq ($(BOARD),brcm-2.4) - BUILDFLAGS=-DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include -DLINUX_2_4 -endif - define Build/Compile $(MAKE) -C "$(LINUX_DIR)" \ CROSS_COMPILE="$(TARGET_CROSS)" \ diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c index 38f51cb658..11b8f425d9 100644 --- a/package/broadcom-diag/src/diag.c +++ b/package/broadcom-diag/src/diag.c @@ -27,20 +27,12 @@ #include #include #include - -#ifndef LINUX_2_4 #include #include #include #include extern struct sock *uevent_sock; extern u64 uevent_next_seqnum(void); -#else -#include -#define INIT_WORK INIT_TQUEUE -#define schedule_work schedule_task -#define work_struct tq_struct -#endif #include "gpio.h" #include "diag.h" @@ -179,12 +171,10 @@ static void __init NetCenter_init(void) { static void __init bcm57xx_init(void) { int pin = 1 << 2; -#ifndef LINUX_2_4 /* FIXME: switch comes up, but port mappings/vlans not right */ gpio_outen(pin, pin); gpio_control(pin, 0); gpio_out(pin, pin); -#endif } static struct platform_t __initdata platforms[] = { @@ -1145,7 +1135,6 @@ static void unregister_buttons(struct button_t *b) } -#ifndef LINUX_2_4 static void add_msg(struct event_t *event, char *msg, int argv) { char *s; @@ -1177,43 +1166,6 @@ static void hotplug_button(struct work_struct *work) kfree(event); } -#else /* !LINUX_2_4 */ -static inline char *kzalloc(unsigned int size, unsigned int gfp) -{ - char *p; - - p = kmalloc(size, gfp); - if (p == NULL) - return NULL; - - memset(p, 0, size); - - return p; -} - -static void add_msg(struct event_t *event, char *msg, int argv) -{ - if (argv) - event->argv[event->anr++] = event->scratch; - else - event->envp[event->enr++] = event->scratch; - - event->scratch += sprintf(event->scratch, "%s", msg) + 1; -} - -static void hotplug_button(struct event_t *event) -{ - char *scratch = kzalloc(256, GFP_KERNEL); - event->scratch = scratch; - - add_msg(event, hotplug_path, 1); - add_msg(event, "button", 1); - fill_event(event); - call_usermodehelper (event->argv[0], event->argv, event->envp); - kfree(scratch); - kfree(event); -} -#endif /* !LINUX_2_4 */ static int fill_event (struct event_t *event) { @@ -1228,20 +1180,14 @@ static int fill_event (struct event_t *event) add_msg(event, buf, 0); snprintf(buf, 128, "SEEN=%ld", event->seen); add_msg(event, buf, 0); -#ifndef LINUX_2_4 snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum()); add_msg(event, buf, 0); -#endif return 0; } -#ifndef LINUX_2_4 static irqreturn_t button_handler(int irq, void *dev_id) -#else -static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs) -#endif { struct button_t *b; u32 in, changed; @@ -1264,11 +1210,7 @@ static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs) event->seen = (jiffies - b->seen)/HZ; event->name = b->name; event->action = b->pressed ? "pressed" : "released"; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) INIT_WORK(&event->wq, (void *)(void *)hotplug_button); -#else - INIT_WORK(&event->wq, (void *)(void *)hotplug_button, (void *)event); -#endif schedule_work(&event->wq); } @@ -1362,12 +1304,7 @@ static void led_flash(unsigned long dummy) { static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos) { -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif char *page; int len = 0; @@ -1420,12 +1357,7 @@ static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos) { -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif char *page; int ret = -EINVAL; diff --git a/package/broadcom-wl/Makefile b/package/broadcom-wl/Makefile index 395ddd72cf..2d4aacf14e 100644 --- a/package/broadcom-wl/Makefile +++ b/package/broadcom-wl/Makefile @@ -23,7 +23,7 @@ define Package/broadcom-wl/Default CATEGORY:=Kernel modules DEPENDS:=@PACKAGE_kmod-brcm-wl||PACKAGE_kmod-brcm-wl-mini SUBMENU:=Proprietary BCM43xx WiFi driver - SUBMENUDEP:=@TARGET_brcm47xx||@TARGET_brcm_2_4 + SUBMENUDEP:=@TARGET_brcm47xx endef define KernelPackage/brcm-wl/Default diff --git a/package/busybox/Config.in b/package/busybox/Config.in index 1002a5a0d6..8353474bcd 100644 --- a/package/busybox/Config.in +++ b/package/busybox/Config.in @@ -1,21 +1,6 @@ menu "Configuration" depends on PACKAGE_busybox -config BUSYBOX_CONFIG_FEATURE_DEVFS - bool - default y if LINUX_2_4 - default n if LINUX_2_6 - -config BUSYBOX_CONFIG_FEATURE_2_4_MODULES - bool - default y if LINUX_2_4 - default n if LINUX_2_6 - -config BUSYBOX_CONFIG_FEATURE_2_6_MODULES - bool - default n if LINUX_2_4 - default y if LINUX_2_6 - config BUSYBOX_CONFIG_NOMMU bool depends NOMMU diff --git a/package/fuse/Makefile b/package/fuse/Makefile index a6b67ecf65..cbd15e83b8 100644 --- a/package/fuse/Makefile +++ b/package/fuse/Makefile @@ -18,14 +18,6 @@ PKG_MD5SUM:=a26ec54e410bb826a387947b10c0fd2c PKG_INSTALL:=1 -# Kernel 2.4 Module -FUSE24_VERSION=2.5.3 -FUSE24_SOURCE:=$(PKG_NAME)-$(FUSE24_VERSION).tar.gz -FUSE24_MD5SUM:=9c7e8b6606b9f158ae20b8521ba2867c -FUSE24_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(FUSE24_VERSION) -FUSE24_INSTALL_DIR:=$(FUSE24_BUILD_DIR)/ipkg-install -FUSE24_PATCH_DIR:=./patches-kernel24 - include $(INCLUDE_DIR)/package.mk define Package/fuse/Default @@ -54,18 +46,13 @@ $(call Package/fuse/Default/description) endef define KernelPackage/fuse - $(call Package/fuse/Default) - SUBMENU:=Filesystems - TITLE+= (kernel module) - ifeq ($(KERNEL),2.4) - FILES:=$(FUSE24_INSTALL_DIR)/lib/modules/$(LINUX_VERSION)/kernel/fs/fuse/fuse.$(LINUX_KMOD_SUFFIX) - VERSION:=$(LINUX_VERSION)+$(FUSE24_VERSION)-$(PKG_RELEASE) - else - KCONFIG:= CONFIG_FUSE_FS - FILES:=$(LINUX_DIR)/fs/fuse/fuse.$(LINUX_KMOD_SUFFIX) - VERSION:=$(LINUX_VERSION)-$(LINUX_RELEASE) - endif - AUTOLOAD:=$(call AutoLoad,80,fuse) + $(call Package/fuse/Default) + SUBMENU:=Filesystems + TITLE+= (kernel module) + KCONFIG:= CONFIG_FUSE_FS + FILES:=$(LINUX_DIR)/fs/fuse/fuse.$(LINUX_KMOD_SUFFIX) + VERSION:=$(LINUX_VERSION)-$(LINUX_RELEASE) + AUTOLOAD:=$(call AutoLoad,80,fuse) endef define KernelPackage/fuse/description @@ -95,97 +82,11 @@ CONFIGURE_ARGS += \ --enable-static \ --disable-rpath \ --disable-example \ - --disable-mtab - -# kmod 2.4 args -FUSE24_CONFIGURE_ARGS := $(CONFIGURE_ARGS) \ - --disable-lib --disable-util \ - --enable-kernel-module --disable-auto-modprobe \ - --with-kernel="$(LINUX_DIR)" + --disable-mtab # generic package uses lib & utils CONFIGURE_ARGS += --enable-lib --enable-util -####### FUSE24 - START ###### -### if we're on kernel 2.4 build a kernel 2.4 compatible fuse module from older version, see also -### http://sourceforge.net/apps/mediawiki/fuse/index.php?title=FAQ#What_version_of_FUSE_do_I_need_to_use_FUSE_with_Linux_2.4.3F -ifeq ($(KERNEL),2.4) - -define Download/fuse24 - FILE:=$(FUSE24_SOURCE) - URL:=$(PKG_SOURCE_URL) - MD5SUM:=$(FUSE24_MD5SUM) -endef -$(eval $(call Download,fuse24)) - -define Build/Prepare/fuse24 - rm -rf $(FUSE24_BUILD_DIR)/ - mkdir -p $(FUSE24_BUILD_DIR)/ - $(TAR) -xzf $(DL_DIR)/$(FUSE24_SOURCE) -C $(FUSE24_BUILD_DIR)/.. -endef - -define Build/Patch/fuse24 - $(call PatchDir,$(FUSE24_BUILD_DIR),$(FUSE24_PATCH_DIR),) -endef - -define Build/Configure/fuse24 - (cd $(FUSE24_BUILD_DIR); \ - rm -rf config.{cache,status} ; \ - $(CONFIGURE_VARS) \ - ./configure \ - $(FUSE24_CONFIGURE_ARGS) \ - ); -endef - -define Build/Compile/fuse24 - $(MAKE) -C $(FUSE24_BUILD_DIR)/$(MAKE_PATH) \ - ARCH="$(LINUX_KARCH)" \ - CROSS_COMPILE="$(TARGET_CROSS)" \ - all; -endef - -define Build/Install/fuse24 - rm -rf $(FUSE24_INSTALL_DIR) - mkdir -p $(FUSE24_INSTALL_DIR) - $(MAKE) -C $(FUSE24_BUILD_DIR) \ - ARCH="$(LINUX_KARCH)" \ - CROSS_COMPILE="$(TARGET_CROSS)" \ - DESTDIR="$(FUSE24_INSTALL_DIR)" \ - install -endef - -define Build/Prepare - @echo "--> Build/Prepare enter" - $(call Build/Prepare/fuse24) - $(call Build/Patch/fuse24) - $(call Build/Prepare/Default) - @echo "--> Build/Prepare leave" -endef - -define Build/Configure - @echo "--> Build/Configure enter" - $(call Build/Configure/fuse24) - $(call Build/Configure/Default) - @echo "--> Build/Configure leave" -endef - -define Build/Compile - @echo "--> Build/Compile enter" - $(call Build/Compile/fuse24) - $(call Build/Compile/Default) - @echo "--> Build/Compile leave" -endef - -define Build/Install - @echo "--> Build/Install enter" - $(call Build/Install/fuse24) - $(call Build/Install/Default) - @echo "--> Build/Install leave" -endef - -endif -####### FUSE24 - END ###### - define Build/InstallDev @echo "--> Build/InstallDev enter" mkdir -p $(1)/usr/include diff --git a/package/hostap-driver/Makefile b/package/hostap-driver/Makefile index 3ea3a25e22..2b83bda96e 100644 --- a/package/hostap-driver/Makefile +++ b/package/hostap-driver/Makefile @@ -17,20 +17,9 @@ PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/ PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378 include $(INCLUDE_DIR)/package.mk -ifeq ($(DUMP),) - -include $(LINUX_DIR)/.config -endif - -define KernelPackage/hostap/Default/2.4 - VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE) -endef - -define KernelPackage/hostap/Default/2.6 - VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE) -endef define KernelPackage/hostap/Default -$(call KernelPackage/hostap/Default/$(KERNEL)) + VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE) SUBMENU:=Wireless Drivers URL:=http://hostap.epitest.fi/ endef @@ -45,26 +34,9 @@ endef define KernelPackage/hostap $(call KernelPackage/hostap/Default) TITLE:=Host AP support for Prism2/2.5/3 - DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +LINUX_2_6:kmod-lib80211 +wireless-tools + DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-lib80211 +wireless-tools KCONFIG:=CONFIG_HOSTAP CONFIG_HOSTAP_FIRMWARE=y CONFIG_HOSTAP_FIRMWARE_NVRAM=y -endef - -define KernelPackage/hostap/2.4 -# NOTE: needed to remove the dependency on kmod-ieee80211 in the final ipkg - DEPENDS:= -# NOTE: needed to build the standalone version on 2.4 - KCONFIG:= - FILES:= \ - $(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \ - $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \ - $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \ - $(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,60,hostap hostap_crypt_wep hostap_crypt_tkip hostap_crypt_ccmp) -endef - -define KernelPackage/hostap/2.6 - FILES:= \ - $(LINUX_DIR)/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX) + FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,60,hostap) endef @@ -81,18 +53,9 @@ $(call KernelPackage/hostap/Default) TITLE:=Host AP driver for PCMCIA adaptors DEPENDS:=@PCMCIA_SUPPORT +kmod-hostap +kmod-pcmcia-core KCONFIG:=CONFIG_HOSTAP_CS + FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_cs.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,60,hostap_cs) endef -define KernelPackage/hostap-cs/2.4 -# NOTE: needed to build the standalone version on 2.4 - KCONFIG:= - FILES:= \ - $(PKG_BUILD_DIR)/driver/modules/hostap_cs.$(LINUX_KMOD_SUFFIX) -endef -define KernelPackage/hostap-cs/2.6 - FILES:= \ - $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_cs.$(LINUX_KMOD_SUFFIX) -endef define KernelPackage/hostap-cs/description $(call KernelPackage/hostap/Default/description) @@ -105,21 +68,10 @@ $(call KernelPackage/hostap/Default) TITLE:=Host AP driver for PCI adaptors DEPENDS:=@PCI_SUPPORT +kmod-hostap KCONFIG:=CONFIG_HOSTAP_PCI + FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,60,hostap_pci) endef -define KernelPackage/hostap-pci/2.4 -# NOTE: needed to build the standalone version on 2.4 - KCONFIG:= - FILES:= \ - $(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX) -endef - -define KernelPackage/hostap-pci/2.6 - FILES:= \ - $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX) -endef - define KernelPackage/hostap-pci/description $(call KernelPackage/hostap/Default/description) This package contains the Host AP driver for Prism2.5 PCI adaptors. @@ -131,21 +83,10 @@ $(call KernelPackage/hostap/Default) TITLE:=Host AP driver for PLX9052 based PCI adaptors DEPENDS:=@PCI_SUPPORT +kmod-hostap KCONFIG:=CONFIG_HOSTAP_PLX + FILES:=$(LINUX_DIR)/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,60,hostap_plx) endef -define KernelPackage/hostap-plx/2.4 -# NOTE: needed to build the standalone version on 2.4 - KCONFIG:= - FILES:= \ - $(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX) -endef - -define KernelPackage/hostap-plx/2.6 - FILES:= \ - $(LINUX_DIR)/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX) -endef - define KernelPackage/hostap-plx/description $(call KernelPackage/hostap/Default/description) This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 @@ -153,25 +94,17 @@ $(call KernelPackage/hostap/Default/description) endef -ifeq ($(KERNEL),2.4) - define Build/Compile - $(MAKE) -C $(LINUX_DIR)/ \ - ARCH="$(LINUX_KARCH)" \ - CROSS_COMPILE="$(TARGET_CROSS)" \ - SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \ - modules - endef -else - define Build/Prepare +define Build/Prepare mkdir -p $(PKG_BUILD_DIR) - endef - - define Build/Configure - endef - - define Build/Compile - endef -endif +endef + +define Build/Configure + +endef + +define Build/Compile + +endef define KernelPackage/hostap/install $(INSTALL_DIR) $(1)/lib/wifi diff --git a/package/kernel/modules/001-depends.mk b/package/kernel/modules/001-depends.mk index 5bba0870ee..61d892198e 100644 --- a/package/kernel/modules/001-depends.mk +++ b/package/kernel/modules/001-depends.mk @@ -8,11 +8,11 @@ # XXX: xburst has CONFIG_CRC16=y because of CONFIG_UBIFS_FS=y define SetDepends/crc16 - DEPENDS:= @!(LINUX_2_4||TARGET_xburst) + DEPENDS:= @!TARGET_xburst endef define AddDepends/crc16 - DEPENDS+= +!(LINUX_2_4||TARGET_xburst):kmod-crc16 $(1) + DEPENDS+= +!TARGET_xburst:kmod-crc16 $(1) endef diff --git a/package/kernel/modules/netsupport.mk b/package/kernel/modules/netsupport.mk index c8c5f67500..32448d4811 100644 --- a/package/kernel/modules/netsupport.mk +++ b/package/kernel/modules/netsupport.mk @@ -106,8 +106,8 @@ $(eval $(call KernelPackage,capi)) define KernelPackage/misdn SUBMENU:=$(NETWORK_SUPPORT_MENU) TITLE:=mISDN (ISDN) Support - DEPENDS:=@LINUX_2_6 KCONFIG:= \ + CONFIG_ISDN=y \ CONFIG_MISDN \ CONFIG_MISDN_DSP \ CONFIG_MISDN_L1OIP @@ -118,16 +118,6 @@ define KernelPackage/misdn AUTOLOAD:=$(call AutoLoad,30,mISDN_core mISDN_dsp l1oip) endef -define KernelPackage/misdn/2.4 - KCONFIG+= \ - CONFIG_ISDN -endef - -define KernelPackage/misdn/2.6 - KCONFIG+= \ - CONFIG_ISDN=y -endef - define KernelPackage/misdn/description Modular ISDN driver support endef @@ -140,6 +130,7 @@ define KernelPackage/isdn4linux TITLE:=Old ISDN4Linux (deprecated) DEPENDS:=@LINUX_2_6 KCONFIG:= \ + CONFIG_ISDN=y \ CONFIG_ISDN_I4L \ CONFIG_ISDN_PPP=y \ CONFIG_ISDN_PPP_VJ=y \ @@ -153,23 +144,10 @@ define KernelPackage/isdn4linux CONFIG_ISDN_X25=y \ CONFIG_ISDN_DIVERSION FILES:= \ - $(LINUX_DIR)/drivers/isdn/divert/dss1_divert.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,40,isdn isdn_bsdcomp dss1_divert) -endef - -define KernelPackage/isdn4linux/2.4 - KCONFIG+= \ - CONFIG_ISDN - FILES+= \ - $(LINUX_DIR)/drivers/isdn/isdn_bsdcomp.$(LINUX_KMOD_SUFFIX) -endef - -define KernelPackage/isdn4linux/2.6 - KCONFIG+= \ - CONFIG_ISDN=y - FILES+= \ + $(LINUX_DIR)/drivers/isdn/divert/dss1_divert.$(LINUX_KMOD_SUFFIX) \ $(LINUX_DIR)/drivers/isdn/i4l/isdn.$(LINUX_KMOD_SUFFIX) \ $(LINUX_DIR)/drivers/isdn/i4l/isdn_bsdcomp.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,40,isdn isdn_bsdcomp dss1_divert) endef define KernelPackage/isdn4linux/description @@ -360,10 +338,9 @@ endef $(eval $(call KernelPackage,ipv6)) -# sit is not selectable on 2.4, but built when ipv6 is enabled define KernelPackage/sit SUBMENU:=$(NETWORK_SUPPORT_MENU) - DEPENDS:=+kmod-ipv6 +LINUX_2_6:kmod-iptunnel4 + DEPENDS:=+kmod-ipv6 +kmod-iptunnel4 TITLE:=IPv6-in-IPv4 tunnelling KCONFIG:=CONFIG_IPV6 CONFIG_IPV6_SIT FILES:=$(LINUX_DIR)/net/ipv6/sit.$(LINUX_KMOD_SUFFIX) @@ -534,16 +511,6 @@ define KernelPackage/mppe KCONFIG:= \ CONFIG_PPP_MPPE_MPPC \ CONFIG_PPP_MPPE -endef - -define KernelPackage/mppe/2.4 -# KCONFIG:=CONFIG_PPP_MPPE_MPPC - FILES:=$(LINUX_DIR)/drivers/net/ppp_mppe_mppc.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,31,ppp_mppe_mppc) -endef - -define KernelPackage/mppe/2.6 -# KCONFIG:=CONFIG_PPP_MPPE FILES:=$(LINUX_DIR)/drivers/net/ppp_mppe.$(LINUX_KMOD_SUFFIX) AUTOLOAD:=$(call AutoLoad,31,ppp_mppe) endef diff --git a/package/kernel/modules/nls.mk b/package/kernel/modules/nls.mk index 26d55d9870..7c4f20353b 100644 --- a/package/kernel/modules/nls.mk +++ b/package/kernel/modules/nls.mk @@ -6,7 +6,7 @@ # define AddDepends/nls - DEPENDS+= +!LINUX_2_4:kmod-nls-base + DEPENDS+= +kmod-nls-base endef define KernelPackage/nls-base diff --git a/package/kernel/modules/other.mk b/package/kernel/modules/other.mk index de60e6920e..960b730d83 100644 --- a/package/kernel/modules/other.mk +++ b/package/kernel/modules/other.mk @@ -7,11 +7,7 @@ OTHER_MENU:=Other modules -# XXX: added a workaround for watchdog path changes -ifeq ($(KERNEL),2.4) - WATCHDOG_DIR=char -endif -WATCHDOG_DIR?=watchdog +WATCHDOG_DIR:=watchdog define KernelPackage/bluetooth @@ -39,37 +35,6 @@ define KernelPackage/bluetooth $(call AddDepends/crc16) $(call AddDepends/hid) $(call AddDepends/rfkill) -endef - -define KernelPackage/bluetooth/2.4 -# KCONFIG:= \ -# CONFIG_BLUEZ \ -# CONFIG_BLUEZ_L2CAP \ -# CONFIG_BLUEZ_SCO \ -# CONFIG_BLUEZ_RFCOMM \ -# CONFIG_BLUEZ_BNEP \ -# CONFIG_BLUEZ_HCIUART \ -# CONFIG_BLUEZ_HCIUSB - FILES:= \ - $(LINUX_DIR)/net/bluetooth/bluez.$(LINUX_KMOD_SUFFIX) \ - $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \ - $(LINUX_DIR)/net/bluetooth/sco.$(LINUX_KMOD_SUFFIX) \ - $(LINUX_DIR)/net/bluetooth/rfcomm/rfcomm.$(LINUX_KMOD_SUFFIX) \ - $(LINUX_DIR)/net/bluetooth/bnep/bnep.$(LINUX_KMOD_SUFFIX) \ - $(LINUX_DIR)/drivers/bluetooth/hci_uart.$(LINUX_KMOD_SUFFIX) \ - $(LINUX_DIR)/drivers/bluetooth/hci_usb.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,90,bluez l2cap sco rfcomm bnep hci_uart hci_usb) -endef - -define KernelPackage/bluetooth/2.6 -# KCONFIG:= \ -# CONFIG_BT \ -# CONFIG_BT_L2CAP \ -# CONFIG_BT_SCO \ -# CONFIG_BT_RFCOMM \ -# CONFIG_BT_BNEP \ -# CONFIG_BT_HCIUSB \ -# CONFIG_BT_HCIUART FILES:= \ $(LINUX_DIR)/net/bluetooth/bluetooth.$(LINUX_KMOD_SUFFIX) \ $(LINUX_DIR)/net/bluetooth/l2cap.$(LINUX_KMOD_SUFFIX) \ @@ -286,22 +251,14 @@ define KernelPackage/input-core TITLE:=Input device core KCONFIG:=CONFIG_INPUT $(call SetDepends/input) + FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,19,input-core) endef define KernelPackage/input-core/description Kernel modules for support of input device endef -define KernelPackage/input-core/2.4 - FILES:=$(LINUX_DIR)/drivers/input/input.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,19,input) -endef - -define KernelPackage/input-core/2.6 - FILES:=$(LINUX_DIR)/drivers/input/input-core.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,19,input-core) -endef - $(eval $(call KernelPackage,input-core)) @@ -521,7 +478,7 @@ $(eval $(call KernelPackage,ledtrig-netdev)) define KernelPackage/lp SUBMENU:=$(OTHER_MENU) TITLE:=Parallel port and line printer support - DEPENDS:=@LINUX_2_4 + DEPENDS:=@BROKEN KCONFIG:= \ CONFIG_PARPORT \ CONFIG_PRINTER \ @@ -533,19 +490,6 @@ define KernelPackage/lp AUTOLOAD:=$(call AutoLoad,50,parport lp) endef -define KernelPackage/lp/2.4 - FILES:= \ - $(LINUX_DIR)/drivers/parport/parport.$(LINUX_KMOD_SUFFIX) \ - $(LINUX_DIR)/drivers/parport/parport_*.$(LINUX_KMOD_SUFFIX) \ - $(LINUX_DIR)/drivers/char/lp.$(LINUX_KMOD_SUFFIX) \ - $(LINUX_DIR)/drivers/char/ppdev.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,50, \ - parport \ - parport_splink \ - lp \ - ) -endef - $(eval $(call KernelPackage,lp)) diff --git a/package/kernel/modules/usb.mk b/package/kernel/modules/usb.mk index 7ead8fc89f..dc0479f605 100644 --- a/package/kernel/modules/usb.mk +++ b/package/kernel/modules/usb.mk @@ -7,11 +7,7 @@ USB_MENU:=USB Support -ifneq ($(CONFIG_LINUX_2_4),) - USBNET_DIR:=usb/net -endif - -USBNET_DIR?=net/usb +USBNET_DIR:=net/usb USBHID_DIR?=hid/usbhid USBINPUT_DIR?=input/misc @@ -20,15 +16,8 @@ define KernelPackage/usb-core TITLE:=Support for USB DEPENDS:=@USB_SUPPORT +LINUX_2_6_31:kmod-nls-base +LINUX_2_6_32:kmod-nls-base +LINUX_2_6_33:kmod-nls-base +LINUX_2_6_34:kmod-nls-base KCONFIG:=CONFIG_USB - AUTOLOAD:=$(call AutoLoad,20,usbcore,1) -endef - -define KernelPackage/usb-core/2.4 - FILES:=$(LINUX_DIR)/drivers/usb/usbcore.$(LINUX_KMOD_SUFFIX) -endef - -define KernelPackage/usb-core/2.6 FILES:=$(LINUX_DIR)/drivers/usb/core/usbcore.$(LINUX_KMOD_SUFFIX) + AUTOLOAD:=$(call AutoLoad,20,usbcore,1) endef define KernelPackage/usb-core/description @@ -49,19 +38,9 @@ define KernelPackage/usb-uhci KCONFIG:= \ CONFIG_USB_UHCI_ALT \ CONFIG_USB_UHCI_HCD - $(call AddDepends/usb) -endef - -define KernelPackage/usb-uhci/2.4 -# KCONFIG:=CONFIG_USB_UHCI_ALT - FILES:=$(LINUX_DIR)/drivers/usb/host/uhci.o - AUTOLOAD:=$(call AutoLoad,50,uhci,1) -endef - -define KernelPackage/usb-uhci/2.6 -# KCONFIG:=CONFIG_USB_UHCI_HCD FILES:=$(LINUX_DIR)/drivers/usb/host/uhci-hcd.ko AUTOLOAD:=$(call AutoLoad,50,uhci-hcd,1) + $(call AddDepends/usb) endef define KernelPackage/usb-uhci/description @@ -71,41 +50,15 @@ endef $(eval $(call KernelPackage,usb-uhci,1)) -define KernelPackage/usb-uhci-iv - TITLE:=Support for Intel/VIA UHCI controllers - DEPENDS:=@LINUX_2_4 - KCONFIG:=CONFIG_USB_UHCI - FILES:=$(LINUX_DIR)/drivers/usb/host/usb-uhci.$(LINUX_KMOD_SUFFIX) - AUTOLOAD:=$(call AutoLoad,50,usb-uhci,1) - $(call AddDepends/usb) -endef - -define KernelPackage/usb-uhci-iv/description - Kernel support for Intel/VIA USB UHCI controllers -endef - -$(eval $(call KernelPackage,usb-uhci-iv,1)) - - define KernelPackage/usb-ohci TITLE:=Support for OHCI controllers KCONFIG:= \ CONFIG_USB_OHCI \ CONFIG_USB_OHCI_HCD \ CONFIG_USB_OHCI_AR71XX=y - $(call AddDepends/usb) -endef - -define KernelPackage/usb-ohci/2.4 -# KCONFIG:=CONFIG_USB_OHCI - FILES:=$(LINUX_DIR)/drivers/usb/host/usb-ohci.o - AUTOLOAD:=$(call AutoLoad,50,usb-ohci,1) -endef - -define KernelPackage/usb-ohci/2.6 -# KCONFIG:=CONFIG_USB_OHCI_HCD FILES:=$(LINUX_DIR)/drivers/usb/host/ohci-hcd.ko AUTOLOAD:=$(call AutoLoad,50,ohci-hcd,1) + $(call AddDepends/usb) endef define KernelPackage/usb-ohci/description @@ -153,17 +106,9 @@ $(eval $(call KernelPackage,usb2)) define KernelPackage/usb-acm TITLE:=Support for modems/isdn controllers KCONFIG:=CONFIG_USB_ACM -$(call AddDepends/usb) -endef - -define KernelPackage/usb-acm/2.4 - FILES:=$(LINUX_DIR)/drivers/usb/acm.o - AUTOLOAD:=$(call AutoLoad,60,acm) -endef - -define KernelPackage/usb-acm/2.6 FILES:=$(LINUX_DIR)/drivers/usb/class/cdc-acm.ko AUTOLOAD:=$(call AutoLoad,60,cdc-acm) +$(call AddDepends/usb) endef define KernelPackage/usb-acm/description @@ -180,16 +125,6 @@ define KernelPackage/usb-audio CONFIG_SND_USB_AUDIO $(call AddDepends/usb) $(call AddDepends/sound) -endef - -define KernelPackage/usb-audio/2.4 -# KCONFIG:=CONFIG_USB_AUDIO - FILES:=$(LINUX_DIR)/drivers/usb/audio.o - AUTOLOAD:=$(call AutoLoad,60,audio) -endef - -define KernelPackage/usb-audio/2.6 -# KCONFIG:=CONFIG_SND_USB_AUDIO FILES:= \ $(LINUX_DIR)/sound/usb/snd-usb-lib.ko \ $(LINUX_DIR)/sound/usb/snd-usb-audio.ko @@ -206,17 +141,9 @@ $(eval $(call KernelPackage,usb-audio)) define KernelPackage/usb-printer TITLE:=Support for printers KCONFIG:=CONFIG_USB_PRINTER - $(call AddDepends/usb) -endef - -define KernelPackage/usb-printer/2.4 - FILES:=$(LINUX_DIR)/drivers/usb/printer.o - AUTOLOAD:=$(call AutoLoad,60,printer) -endef - -define KernelPackage/usb-printer/2.6 FILES:=$(LINUX_DIR)/drivers/usb/class/usblp.ko AUTOLOAD:=$(call AutoLoad,60,usblp) + $(call AddDepends/usb) endef define KernelPackage/usb-printer/description @@ -641,15 +568,8 @@ define KernelPackage/usb-net TITLE:=Kernel modules for USB-to-Ethernet convertors KCONFIG:=CONFIG_USB_USBNET AUTOLOAD:=$(call AutoLoad,60,usbnet) - $(call AddDepends/usb) -endef - -define KernelPackage/usb-net/2.4 - FILES:=$(LINUX_DIR)/drivers/usb/usbnet.$(LINUX_KMOD_SUFFIX) -endef - -define KernelPackage/usb-net/2.6 FILES:=$(LINUX_DIR)/drivers/$(USBNET_DIR)/usbnet.$(LINUX_KMOD_SUFFIX) + $(call AddDepends/usb) endef define KernelPackage/usb-net/description diff --git a/package/kernel/modules/wireless.mk b/package/kernel/modules/wireless.mk index 41a05ff599..0818153b5d 100644 --- a/package/kernel/modules/wireless.mk +++ b/package/kernel/modules/wireless.mk @@ -10,7 +10,6 @@ WIRELESS_MENU:=Wireless Drivers define KernelPackage/lib80211 SUBMENU:=$(WIRELESS_MENU) TITLE:=802.11 Networking stack - DEPENDS:=@!LINUX_2_4 KCONFIG:= \ CONFIG_LIB80211 \ CONFIG_LIB80211_CRYPT_WEP \ diff --git a/package/nvram/Makefile b/package/nvram/Makefile index 4a57de2e32..c47f1c7bbb 100644 --- a/package/nvram/Makefile +++ b/package/nvram/Makefile @@ -18,12 +18,12 @@ define Package/nvram SECTION:=utils CATEGORY:=Base system TITLE:=Userspace port of the Broadcom NVRAM manipulation tool - DEPENDS:=@TARGET_brcm_2_4||@TARGET_brcm47xx||@TARGET_ar71xx + DEPENDS:=@TARGET_brcm47xx||@TARGET_ar71xx endef define Package/nvram/description This package contains an utility to manipulate NVRAM on Broadcom based devices. - It works on both brcm-2.4 and bcm47xx (Linux 2.6) without using the kernel api. + It works on bcm47xx (Linux 2.6) without using the kernel api. endef define Build/Prepare diff --git a/package/rtc-rv5c386a/Makefile b/package/rtc-rv5c386a/Makefile index e0fde7834e..9f53b76675 100644 --- a/package/rtc-rv5c386a/Makefile +++ b/package/rtc-rv5c386a/Makefile @@ -15,7 +15,7 @@ include $(INCLUDE_DIR)/package.mk define KernelPackage/rtc-rv5c386a SUBMENU:=Other modules - DEPENDS:=@TARGET_brcm_2_4||TARGET_brcm47xx + DEPENDS:=@TARGET_brcm47xx TITLE:=Driver for RTC RV5C386A (used in WL-700gE and WL-HDD) AUTOLOAD:=$(call AutoLoad,70,rtc) FILES:=$(PKG_BUILD_DIR)/rtc.$(LINUX_KMOD_SUFFIX) @@ -26,10 +26,6 @@ define Build/Prepare $(CP) ./src/* $(PKG_BUILD_DIR)/ endef -ifeq ($(BOARD),brcm-2.4) - BUILDFLAGS=-DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include -DLINUX_2_4 -endif - define Build/Compile $(MAKE) -C "$(LINUX_DIR)" \ CROSS_COMPILE="$(TARGET_CROSS)" \ diff --git a/package/switch/Makefile b/package/switch/Makefile index 74e42e6d93..7570f56d3d 100644 --- a/package/switch/Makefile +++ b/package/switch/Makefile @@ -15,7 +15,7 @@ include $(INCLUDE_DIR)/package.mk define KernelPackage/switch SUBMENU:=Other modules - DEPENDS:=@TARGET_brcm_2_4||TARGET_brcm47xx||TARGET_brcm63xx + DEPENDS:=@TARGET_brcm47xx||TARGET_brcm63xx TITLE:=Switch drivers FILES:= \ $(PKG_BUILD_DIR)/switch-core.$(LINUX_KMOD_SUFFIX) \ @@ -33,15 +33,10 @@ define Build/Prepare $(CP) ./src/* $(PKG_BUILD_DIR)/ endef -ifeq ($(BOARD),brcm-2.4) - BUILDFLAGS := -DBROADCOM -DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include -else - ifeq ($(BOARD),brcm47xx) +ifeq ($(BOARD),brcm47xx) BUILDFLAGS := -DBROADCOM - endif endif - define Build/Compile $(MAKE) -C "$(LINUX_DIR)" \ CROSS_COMPILE="$(TARGET_CROSS)" \ diff --git a/package/switch/src/switch-core.c b/package/switch/src/switch-core.c index 9a8989d7f8..e4a3b10ad5 100644 --- a/package/switch/src/switch-core.c +++ b/package/switch/src/switch-core.c @@ -68,12 +68,7 @@ static struct file_operations switch_proc_fops = { static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos) { -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif char *page; int len = 0; @@ -105,12 +100,7 @@ static ssize_t switch_proc_read(struct file *file, char *buf, size_t count, loff static ssize_t switch_proc_write(struct file *file, const char *buf, size_t count, void *data) { -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif char *page; int ret = -EINVAL; diff --git a/package/switch/src/switch-core.h b/package/switch/src/switch-core.h index 31c81f6ed7..c9ab90dde8 100644 --- a/package/switch/src/switch-core.h +++ b/package/switch/src/switch-core.h @@ -13,10 +13,6 @@ #define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c)) #endif -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#define LINUX_2_4 -#endif - typedef int (*switch_handler)(void *driver, char *buf, int nr); typedef struct { diff --git a/package/switch/src/switch-robo.c b/package/switch/src/switch-robo.c index 43e8098b5a..7884bd8b6a 100644 --- a/package/switch/src/switch-robo.c +++ b/package/switch/src/switch-robo.c @@ -63,12 +63,7 @@ #define SIOCGETCPHYRD (SIOCDEVPRIVATE + 9) #define SIOCSETCPHYWR (SIOCDEVPRIVATE + 10) -/* linux 2.4 does not have 'bool' */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0) -#define bool int -#endif - -/* Only available on brcm-2.4/brcm47xx */ +/* Only available on brcm47xx */ #ifdef BROADCOM extern char *nvram_get(const char *name); #define getvar(str) (nvram_get(str)?:"")