From: Andreas Ziegler Date: Mon, 25 Feb 2019 00:19:59 +0000 (+0100) Subject: ar71xx: GL.iNet AR300M family: correct LED definitions X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=53c46b504c630e4c9c5a00bf644a69919bfc0c03;p=openwrt%2Fstaging%2Fluka.git ar71xx: GL.iNet AR300M family: correct LED definitions remove USB as this is no LED but power control rename WiFi LED with correct color red (like in stock firmware) set middle LED to be used for LAN link/activity Signed-off-by: Andreas Ziegler --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 170adaa7a2..183495e57f 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -412,6 +412,7 @@ fritz450e) ;; gl-ar300m) ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt" + ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1" ;; gl-ar750) ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt" diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c index 2a2d2702bc..d10a910129 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c @@ -29,7 +29,6 @@ #include "machtypes.h" #include "pci.h" -#define GL_AR300M_GPIO_LED_USB 2 #define GL_AR300M_GPIO_LED_WLAN 14 #define GL_AR300M_GPIO_LED_LAN 13 #define GL_AR300M_GPIO_LED_SYSTEM 12 @@ -47,13 +46,7 @@ static struct gpio_led gl_ar300m_leds_gpio[] __initdata = { { - .name = "gl-ar300m:green:usb", - .gpio = GL_AR300M_GPIO_LED_USB, - .active_low = 0, - .default_state = 1, - }, - { - .name = "gl-ar300m:green:wlan", + .name = "gl-ar300m:red:wlan", .gpio = GL_AR300M_GPIO_LED_WLAN, .active_low = 1, },