From: Kurt Roeckx <kurt@roeckx.be>
Date: Sun, 14 Feb 2021 13:28:20 +0000 (+0100)
Subject: ramips: mark toggle input on EX6150 as a switch
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=539966554d6d0686dc8ce62e39ff9e8f4e2d4e74;p=openwrt%2Fstaging%2Fzorun.git

ramips: mark toggle input on EX6150 as a switch

The Netgear EX6150 has an Access Point/Extender switch. Set it as
an EV_SW. Otherwise when it's set to Access Point, it will trigger
failsafe mode during boot.

Fixes: FS#3590
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
---

diff --git a/target/linux/ramips/dts/mt7621_netgear_ex6150.dts b/target/linux/ramips/dts/mt7621_netgear_ex6150.dts
index 8fce1d7d6d..2bf858b226 100644
--- a/target/linux/ramips/dts/mt7621_netgear_ex6150.dts
+++ b/target/linux/ramips/dts/mt7621_netgear_ex6150.dts
@@ -86,6 +86,7 @@
 			label = "AP/Extender toggle";
 			gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
 			/* Active when switch is set to "Access Point" */
 		};
 	};