From: Gabriel Huau Date: Tue, 26 May 2015 05:27:37 +0000 (-0700) Subject: x86: gpio: add pinctrl support from the device tree X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=5318f18d2c002f505054b90bb95ba7c53532eedf;p=project%2Fbcm63xx%2Fu-boot.git x86: gpio: add pinctrl support from the device tree Every pin can be configured now from the device tree. A dt-bindings has been added to describe the different property available. Change-Id: I1668886062655f83700d0e7bbbe3ad09b19ee975 Signed-off-by: Gabriel Huau Acked-by: Simon Glass --- diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts index 7103bc5077..bd21bfb0b4 100644 --- a/arch/x86/dts/minnowmax.dts +++ b/arch/x86/dts/minnowmax.dts @@ -6,6 +6,8 @@ /dts-v1/; +#include + /include/ "skeleton.dtsi" /include/ "serial.dtsi" @@ -22,6 +24,27 @@ silent_console = <0>; }; + pch_pinctrl { + compatible = "intel,x86-pinctrl"; + io-base = <0x4c>; + + pin_usb_host_en0@0 { + gpio-offset = <0x80 8>; + pad-offset = <0x260>; + mode-gpio; + output-value = <1>; + direction = ; + }; + + pin_usb_host_en1@0 { + gpio-offset = <0x80 9>; + pad-offset = <0x258>; + mode-gpio; + output-value = <1>; + direction = ; + }; + }; + gpioa { compatible = "intel,ich6-gpio"; u-boot,dm-pre-reloc; diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h index 1099427388..ed85b08ce7 100644 --- a/arch/x86/include/asm/gpio.h +++ b/arch/x86/include/asm/gpio.h @@ -147,6 +147,7 @@ struct pch_gpio_map { } set3; }; +int gpio_ich6_pinctrl_init(void); void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio); void ich_gpio_set_gpio_map(const struct pch_gpio_map *map); diff --git a/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt b/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt new file mode 100644 index 0000000000..45ab1afc39 --- /dev/null +++ b/doc/device-tree-bindings/gpio/intel,x86-pinctrl.txt @@ -0,0 +1,31 @@ +Intel x86 PINCTRL/GPIO controller + +Pin-muxing on x86 can be described with a node for the PINCTRL master +node and a set of child nodes for each pin on the SoC. + +The PINCTRL master node requires the following properties: +- compatible : "intel,x86-pinctrl" + +Pin nodes must be children of the pinctrl master node and can +contain the following properties: +- pad-offset - (required) offset in the IOBASE for the pin to configured. +- gpio-offset - (required) offset in the GPIOBASE for the pin to configured and + also the bit shift in this register. +- mode-gpio - (optional) standalone property to force the pin into GPIO mode. +- mode-func - (optional) function number to assign to the pin. if 'mode-gpio' + is set, this property will be ignored. +in case of 'mode-gpio' property set: +- output-value - (optional) this set the default output value of the GPIO. +- direction - (optional) this set the direction of the gpio. +- pull-str - (optional) this set the pull strength of the pin. +- pull-assign - (optional) this set the pull assignement (up/down) of the pin. + +Example: + +pin_usb_host_en0@0 { + gpio-offset = <0x80 8>; + pad-offset = <0x260>; + mode-gpio; + output-value = <1>; + direction = ; +}; diff --git a/drivers/gpio/intel_ich6_gpio.c b/drivers/gpio/intel_ich6_gpio.c index 7e679a086e..8a108f3805 100644 --- a/drivers/gpio/intel_ich6_gpio.c +++ b/drivers/gpio/intel_ich6_gpio.c @@ -44,21 +44,28 @@ struct ich6_bank_priv { uint16_t lvl; }; +#define GPIO_USESEL_OFFSET(x) (x) +#define GPIO_IOSEL_OFFSET(x) (x + 4) +#define GPIO_LVL_OFFSET(x) (x + 8) + +#define IOPAD_MODE_MASK 0x7 +#define IOPAD_PULL_ASSIGN_SHIFT 7 +#define IOPAD_PULL_ASSIGN_MASK (0x3 << IOPAD_PULL_ASSIGN_SHIFT) +#define IOPAD_PULL_STRENGTH_SHIFT 9 +#define IOPAD_PULL_STRENGTH_MASK (0x3 << IOPAD_PULL_STRENGTH_SHIFT) + /* TODO: Move this to device tree, or platform data */ void ich_gpio_set_gpio_map(const struct pch_gpio_map *map) { gd->arch.gpio_map = map; } -static int gpio_ich6_ofdata_to_platdata(struct udevice *dev) +static int gpio_ich6_get_base(unsigned long base) { - struct ich6_bank_platdata *plat = dev_get_platdata(dev); pci_dev_t pci_dev; /* handle for 0:1f:0 */ u8 tmpbyte; u16 tmpword; u32 tmplong; - u16 gpiobase; - int offset; /* Where should it be? */ pci_dev = PCI_BDF(0, 0x1f, 0); @@ -123,9 +130,9 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev) * while on the Ivybridge the bit0 is used to indicate it is an * I/O space. */ - tmplong = x86_pci_read_config32(pci_dev, PCI_CFG_GPIOBASE); + tmplong = x86_pci_read_config32(pci_dev, base); if (tmplong == 0x00000000 || tmplong == 0xffffffff) { - debug("%s: unexpected GPIOBASE value\n", __func__); + debug("%s: unexpected BASE value\n", __func__); return -ENODEV; } @@ -135,7 +142,215 @@ static int gpio_ich6_ofdata_to_platdata(struct udevice *dev) * at the offset that we just read. Bit 0 indicates that it's * an I/O address, not a memory address, so mask that off. */ - gpiobase = tmplong & 0xfffe; + return tmplong & 0xfffc; +} + +static int _ich6_gpio_set_value(uint16_t base, unsigned offset, int value) +{ + u32 val; + + val = inl(base); + if (value) + val |= (1UL << offset); + else + val &= ~(1UL << offset); + outl(val, base); + + return 0; +} + +static int _ich6_gpio_set_function(uint16_t base, unsigned offset, int func) +{ + u32 val; + + if (func) { + val = inl(base); + val |= (1UL << offset); + outl(val, base); + } else { + val = inl(base); + val &= ~(1UL << offset); + outl(val, base); + } + + return 0; +} + +static int _ich6_gpio_set_direction(uint16_t base, unsigned offset, int dir) +{ + u32 val; + + if (!dir) { + val = inl(base); + val |= (1UL << offset); + outl(val, base); + } else { + val = inl(base); + val &= ~(1UL << offset); + outl(val, base); + } + + return 0; +} + +static int _gpio_ich6_pinctrl_cfg_pin(s32 gpiobase, s32 iobase, int pin_node) +{ + u32 gpio_offset[2]; + int pad_offset; + int val; + int ret; + const void *prop; + + /* + * GPIO node is not mandatory, so we only do the + * pinmuxing if the node exist. + */ + ret = fdtdec_get_int_array(gd->fdt_blob, pin_node, "gpio-offset", + gpio_offset, 2); + if (!ret) { + /* Do we want to force the GPIO mode? */ + prop = fdt_getprop(gd->fdt_blob, pin_node, "mode-gpio", + NULL); + if (prop) + _ich6_gpio_set_function(GPIO_USESEL_OFFSET + (gpiobase) + + gpio_offset[0], + gpio_offset[1], 1); + + val = + fdtdec_get_int(gd->fdt_blob, pin_node, "direction", -1); + if (val != -1) + _ich6_gpio_set_direction(GPIO_IOSEL_OFFSET + (gpiobase) + + gpio_offset[0], + gpio_offset[1], val); + + val = + fdtdec_get_int(gd->fdt_blob, pin_node, "output-value", -1); + if (val != -1) + _ich6_gpio_set_value(GPIO_LVL_OFFSET(gpiobase) + + gpio_offset[0], + gpio_offset[1], val); + } + + /* if iobase is present, let's configure the pad */ + if (iobase != -1) { + int iobase_addr; + + /* + * The offset for the same pin for the IOBASE and GPIOBASE are + * different, so instead of maintaining a lookup table, + * the device tree should provide directly the correct + * value for both mapping. + */ + pad_offset = + fdtdec_get_int(gd->fdt_blob, pin_node, "pad-offset", -1); + if (pad_offset == -1) { + debug("%s: Invalid register io offset %d\n", + __func__, pad_offset); + return -EINVAL; + } + + /* compute the absolute pad address */ + iobase_addr = iobase + pad_offset; + + /* + * Do we need to set a specific function mode? + * If someone put also 'mode-gpio', this option will + * be just ignored by the controller + */ + val = fdtdec_get_int(gd->fdt_blob, pin_node, "mode-func", -1); + if (val != -1) + clrsetbits_le32(iobase_addr, IOPAD_MODE_MASK, val); + + /* Configure the pull-up/down if needed */ + val = fdtdec_get_int(gd->fdt_blob, pin_node, "pull-assign", -1); + if (val != -1) + clrsetbits_le32(iobase_addr, + IOPAD_PULL_ASSIGN_MASK, + val << IOPAD_PULL_ASSIGN_SHIFT); + + val = + fdtdec_get_int(gd->fdt_blob, pin_node, "pull-strength", -1); + if (val != -1) + clrsetbits_le32(iobase_addr, + IOPAD_PULL_STRENGTH_MASK, + val << IOPAD_PULL_STRENGTH_SHIFT); + + debug("%s: pad cfg [0x%x]: %08x\n", __func__, pad_offset, + readl(iobase_addr)); + } + + return 0; +} + +int gpio_ich6_pinctrl_init(void) +{ + int pin_node; + int node; + int ret; + int gpiobase; + int iobase_offset; + int iobase = -1; + + /* + * Get the memory/io base address to configure every pins. + * IOBASE is used to configure the mode/pads + * GPIOBASE is used to configure the direction and default value + */ + gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE); + if (gpiobase < 0) { + debug("%s: invalid GPIOBASE address (%08x)\n", __func__, + gpiobase); + return -EINVAL; + } + + /* This is not an error to not have a pinctrl node */ + node = + fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_INTEL_X86_PINCTRL); + if (node <= 0) { + debug("%s: no pinctrl node\n", __func__); + return 0; + } + + /* + * Get the IOBASE, this is not mandatory as this is not + * supported by all the CPU + */ + iobase_offset = fdtdec_get_int(gd->fdt_blob, node, "io-base", -1); + if (iobase_offset == -1) { + debug("%s: io-base offset not present\n", __func__); + } else { + iobase = gpio_ich6_get_base(iobase_offset); + if (iobase < 0) { + debug("%s: invalid IOBASE address (%08x)\n", __func__, + iobase); + return -EINVAL; + } + } + + for (pin_node = fdt_first_subnode(gd->fdt_blob, node); + pin_node > 0; + pin_node = fdt_next_subnode(gd->fdt_blob, pin_node)) { + /* Configure the pin */ + ret = _gpio_ich6_pinctrl_cfg_pin(gpiobase, iobase, pin_node); + if (ret != 0) { + debug("%s: invalid configuration for the pin %d\n", + __func__, pin_node); + return ret; + } + } + + return 0; +} + +static int gpio_ich6_ofdata_to_platdata(struct udevice *dev) +{ + struct ich6_bank_platdata *plat = dev_get_platdata(dev); + u16 gpiobase; + int offset; + + gpiobase = gpio_ich6_get_base(PCI_CFG_GPIOBASE); offset = fdtdec_get_int(gd->fdt_blob, dev->of_offset, "reg", -1); if (offset == -1) { debug("%s: Invalid register offset %d\n", __func__, offset); @@ -192,30 +407,24 @@ static int ich6_gpio_request(struct udevice *dev, unsigned offset, static int ich6_gpio_direction_input(struct udevice *dev, unsigned offset) { struct ich6_bank_priv *bank = dev_get_priv(dev); - u32 tmplong; - tmplong = inl(bank->io_sel); - tmplong |= (1UL << offset); - outl(bank->io_sel, tmplong); - return 0; + return _ich6_gpio_set_direction(inl(bank->io_sel), offset, 0); } static int ich6_gpio_direction_output(struct udevice *dev, unsigned offset, int value) { + int ret; struct ich6_bank_priv *bank = dev_get_priv(dev); - u32 tmplong; - gpio_set_value(offset, value); + ret = _ich6_gpio_set_direction(inl(bank->io_sel), offset, 1); + if (ret) + return ret; - tmplong = inl(bank->io_sel); - tmplong &= ~(1UL << offset); - outl(bank->io_sel, tmplong); - return 0; + return _ich6_gpio_set_value(bank->lvl, offset, value); } static int ich6_gpio_get_value(struct udevice *dev, unsigned offset) - { struct ich6_bank_priv *bank = dev_get_priv(dev); u32 tmplong; @@ -230,15 +439,7 @@ static int ich6_gpio_set_value(struct udevice *dev, unsigned offset, int value) { struct ich6_bank_priv *bank = dev_get_priv(dev); - u32 tmplong; - - tmplong = inl(bank->lvl); - if (value) - tmplong |= (1UL << offset); - else - tmplong &= ~(1UL << offset); - outl(bank->lvl, tmplong); - return 0; + return _ich6_gpio_set_value(bank->lvl, offset, value); } static int ich6_gpio_get_function(struct udevice *dev, unsigned offset) diff --git a/include/dt-bindings/gpio/x86-gpio.h b/include/dt-bindings/gpio/x86-gpio.h new file mode 100644 index 0000000000..7f1de30c0b --- /dev/null +++ b/include/dt-bindings/gpio/x86-gpio.h @@ -0,0 +1,31 @@ +/* + * This header provides constants for binding intel,x86-pinctrl. + */ + +#ifndef _DT_BINDINGS_GPIO_X86_GPIO_H +#define _DT_BINDINGS_GPIO_X86_GPIO_H + +#include + +#define GPIO_MODE_NATIVE 0 +#define GPIO_MODE_GPIO 1 + +#define GPIO_MODE_FUNC0 0 +#define GPIO_MODE_FUNC1 1 +#define GPIO_MODE_FUNC2 2 +#define GPIO_MODE_FUNC3 3 +#define GPIO_MODE_FUNC4 4 +#define GPIO_MODE_FUNC5 5 +#define GPIO_MODE_FUNC6 6 + +#define PIN_INPUT 0 +#define PIN_OUTPUT 1 + +#define PIN_INPUT_NOPULL 0 +#define PIN_INPUT_PULLUP 1 +#define PIN_INPUT_PULLDOWN 2 + +#define PULL_STR_2K 0 +#define PULL_STR_20K 2 + +#endif diff --git a/include/fdtdec.h b/include/fdtdec.h index 64c7fa1955..4fb8a2a1ba 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -176,6 +176,7 @@ enum fdt_compat_id { COMPAT_AMS_AS3722, /* AMS AS3722 PMIC */ COMPAT_INTEL_ICH_SPI, /* Intel ICH7/9 SPI controller */ COMPAT_INTEL_QRK_MRC, /* Intel Quark MRC */ + COMPAT_INTEL_X86_PINCTRL, /* Intel ICH7/9 pin control */ COMPAT_SOCIONEXT_XHCI, /* Socionext UniPhier xHCI */ COMPAT_INTEL_PCH, /* Intel PCH */ COMPAT_INTEL_IRQ_ROUTER, /* Intel Interrupt Router */ diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 1808350a57..46dfcb675c 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -75,6 +75,7 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(AMS_AS3722, "ams,as3722"), COMPAT(INTEL_ICH_SPI, "intel,ich-spi"), COMPAT(INTEL_QRK_MRC, "intel,quark-mrc"), + COMPAT(INTEL_X86_PINCTRL, "intel,x86-pinctrl"), COMPAT(SOCIONEXT_XHCI, "socionext,uniphier-xhci"), COMPAT(COMPAT_INTEL_PCH, "intel,bd82x6x"), COMPAT(COMPAT_INTEL_IRQ_ROUTER, "intel,irq-router"),